Originally Posted by gregs
(Post 3287687)
shoot...we should have tried the 20mm in the front too..if you want we can test fit the 20mm in the front this weekend jess
and atilla im basically asking if it would look odd, i just want to make sure the front wheel wont be sticking out further than the rears. im pretty positive it will fit since my drop isnt too aggressive. |
oh gaddamn it. Kinda a tricky question there. Because it's not necessarily a question of 'if it will fit' - kinda more like 'will this look weird' - at that point some other things come into perspective; camber, overall drop etc.
It will definitely be put the fender and will require a roll and pull because at full load it'll probably grab it. Will it poke out? I don't think so. But it may end up looking like an aggressive fitment with the lip being so close to the fender. |
yeah it will definitely be aggressive thats for sure. if i have to roll and pull thats something i will do after, i really dont think my drop is aggressive enough to require that though.
|
If I were you I'd get 20mm in the front and 25mm in the back. It's always better to have the ass stick out more than the front
|
20mm looked realllyy aggressive already in the rear, it was pretty much flush with the fender...i think 25mm would extend it too far out beyond the fender!
|
ok then +15 up front and +20 in the rear lol
|
so theres no sure answer as to whether or not the front wheels will stick out more that the rear wheels with my setup and 20mm spacers all around?
|
I have a question for you guys..
I am planning to run 19 x 9.5 +25 all around. Will I need a fender roll? I have stock shinka suspention. Also,I plan on running 255/?/19. I would prefer 40, but do I need to run 35 just to make sure it doesnt rub? How much negative camber am I looking at? Thanks ahead... |
Originally Posted by setsuwa
(Post 3291170)
I have a question for you guys..
I am planning to run 19 x 9.5 +25 all around. Will I need a fender roll? I have stock shinka suspention. Also,I plan on running 255/?/19. I would prefer 40, but do I need to run 35 just to make sure it doesnt rub? How much negative camber am I looking at? Thanks ahead... Number two, yes you will rub if you lower the car enough to make the car look good with that wheel. Roll the fenders. I have an 18x9.5 +27 in the front with a 255/35 and it rubs in hard corners. The car is now slightly lower than in my sig. |
I dont think I will be able to low my car in the near future, as my current house has a drive way that scratch. I realize that I have to roll fender if I lower the car. But I would like to know if I need to roll it if I am keeping the stock suspention for now. Thanks for the reply
|
IMHO I wouldnt get those size wheels and stay at stock height... it'll look ridiculous.
|
Originally Posted by Ross_Dawg
(Post 3291435)
IMHO I wouldnt get those size wheels and stay at stock height... it'll look ridiculous.
|
so I suppose height adjustable suspension is the way to go..
|
Yup, but no matter how lowered you are, if you approach a driveway at a steep enough angle you shouldnt have a problem clearing it. You could at least lower it 1.5" all around. Just dont get the wheels and then not lower it lol. It would be better to get coilovers first in that case.
|
Alright, got lazy after reading about 10 pages. I'm going to say that these will fit, a bit more offset on the front rims might be better ... but found a good deal, so take it or leave it.
Work Equips 18x8.5 +25 front, 19x9+38 rear, 245 tires front, 265 rear, Tein S-Tech spring |
^Yeah those will fit fine with no rubbing as long as you have some negative camber all around. And by some I mean about -1.0 degrees of it, which is about what the factory settings are.
|
Originally Posted by BOOSTD 7
(Post 3291881)
Alright, got lazy after reading about 10 pages. I'm going to say that these will fit, a bit more offset on the front rims might be better ... but found a good deal, so take it or leave it.
Work Equips 18x8.5 +25 front, 19x9+38 rear, 245 tires front, 265 rear, Tein S-Tech spring |
would these fit without adjustments?
F: 18x7.5 +38 R: 18x7.5 +38 Other than that...Could someone please enlighten me on what the hell these three numbers stand for? lol... Like what the hell is offset |
1 Attachment(s)
^a lil' research would help before asking ya know.
Google works wonders for questions. but lucky for you i'm in a good mood. Pay attention: Offset:The offset of a wheel is the distance from the mounting surface of the wheel to the true centerline of the rim. A positive offset means the mounting surface of the wheel is positioned in front of the true centerline of the rim / tire assembly. This in effect brings the tire in to the fender well more. Conversely, a negative offset means the mounting surface of the wheel is behind the true centerline of the rim / tire assembly. This will cause the tire to stick out away from the vehicle. Picture: Attachment 270270 Offset = life yes, it's that important. It's the difference between lovin' your wheels and hating your life. btw, 7.5' is smaller than stock wheels. which means FAIL. Go with wider. Our fenders can handle 19x10's and more. Shooting for quality also doesn't hurt. :) |
let there be light!
|
Atilla you deserve a medal for that post :worship:
|
Originally Posted by Atilla
(Post 3293477)
^a lil' research would help before asking ya know.
Google works wonders for questions. but lucky for you i'm in a good mood. Pay attention: Offset:The offset of a wheel is the distance from the mounting surface of the wheel to the true centerline of the rim. A positive offset means the mounting surface of the wheel is positioned in front of the true centerline of the rim / tire assembly. This in effect brings the tire in to the fender well more. Conversely, a negative offset means the mounting surface of the wheel is behind the true centerline of the rim / tire assembly. This will cause the tire to stick out away from the vehicle. Picture: http://i523.photobucket.com/albums/w...etdiagram1.jpg Offset = life yes, it's that important. It's the difference between lovin' your wheels and hating your life. btw, 7.5' is smaller than stock wheels. which means FAIL. Go with wider. Our fenders can handle 19x10's and more. Shooting for quality also doesn't hurt. :) In other words... the middle part of the rim would be outer if the offset is positive and the middle part would be inner if the offset is negative. I'm learning! So what would be an ideal offset for the rx8? From looking through the forum I see people with wheels ranging from like +34 to +43 or so. |
Originally Posted by Ross_Dawg
(Post 3293485)
Atilla you deserve a medal for that post :worship:
|
It depends alot on how wide the rim is. So stock size is 18x8 +50. '18' is obviously the rim size (18") and '8' is the rim width (in inches), so 8" wide with a +50 offset; hence how it 'tucks' into the fender.
If you want an 18x9.5 wheel, a good safe offset is between +35 and +40 |
Originally Posted by RickA
(Post 3293650)
agreed... I started to type a response and thought it was gonna be too much so I gave up and started playing starcraft instead hahaha
|
All times are GMT -5. The time now is 02:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands