I want none to minimum fenders work if possible. Maybe just a roll if I have to. So what would be my best option?

18x9.5 +38 with 255/35 (or could be 265/35)
18x10 +35 with 255/35

BTW, my car is very lowered on coilovers.

The 9.5's will fit with a roll...depending on tires.... maybe even fit with no adjustments

The 10's will need more of a roll...

I have the 18x9.5 +38 with 255s (really 245s with 5mm spacer) and it will work without a roll. It is super close though. I'm unsure of how much camber I have unfortunately. 18x10 +35 will look good too but definitely require fender roll.

ooOOoOoOO - 18x10 +35? sounds like Advan RZ's?? (or rota grids)

+1 on what the guys have already said. The fronts will work w/a roll but you'll need some extra work for the rears to fit. Good news is someone has already tread that path for you (tilt) and it'll work if you make it.

Could also be TC105N :Drooling_

Indeed. Didn't know those weds came in x10's +35 - if so, that'd be sweeeeet! i really like those wheels heh...

I Fail :(

They are 9.5's :tear:

:lol:

damn it! i was really hoping you were right!! i was gonna say "shit! those gotta go on my wish list this year!" rofl

18x10+35 sounds nice :yumyum:

Weds fails at offsets though, its either +35 or +10 for the tc105n; no +25 or anything :icon_no2:

:banghead: 9.5 +35 comes so close to flush - that extra 1/2 inch would probably do the trick :icon_no2:

so my gf's uncle bought some Buddyclub racing P1s but now he's returning the car since it was leased and he wants to get rid of them. I wanna know if they fit or not
they are 19x8 5 on
38mm offset
235/35-19
thanks

Yes they will fit. Tire size is a little off but nothing horrible.

i dont know much about offset....but what is the farthest i can put my wheels out with a 18x9.5 in the rear without having to roll? sorry if it is a stupid question.

depends on how wide of tires you want in the back. If you run 245's you can get away with +35 or higher. 275's +40 or higher

Hi, I am very new to this forum. Just finished readind this entire Thread and all i have too say is Wow! Their are some Car Guru's on here. With this said i just wanted to ask a question?


I am wondering will this fit fine?

I will be lowered on Tanabe Gf's 1.2FR 1.4R . Just Bought 18x8.5 35 offset wheels with 235/40/18 Tires. WIth this fit or Rub? If it will fit for the future whats the widest tire can i fit without Rubbing? Thnx In Advance!!

Yes it will fit fine. 255/40 are probably as wide as you need to go, but you could go even wider than that if you wanted for some reason.

I was told that that's a fwd offset so it wouldn't work. With that off set n tire size how funny would it look? I don't want to spent 1k n have it look horrible. Thanks guys

Whoever told you that is a moron. They will look fine, but wont quite fill out the fender. If possible get a +30 offset.

i'll let him know that
thanks
since im buying the buddy clubs used i only got that option
thanks

haha don't tell him he's a moron, just explain to him that offset has nothing to with whether a car is fwd or rwd. tell him to google "what is wheel offset" and he will see :)

no.....no.....tell him he's a moron. Spreading that kinda misinformation is retarded - stop spreading garbage.


Roxie - i say go w/+35 :rock:



EXAMPLE: Lazi's old rx8

18x9.5 +35 AME FS01 :yumyum:

Attachment 268571

Thnx j8635621! /do you think this is a good set up? In your Opinion? Thnx again!!

Yes, that setup will fit fine. IMO its much too conservative, but its your money :)

Mine? if so then, here's what happened I got a Great Deal on a pair of Rota Torques, and i had brand new tires laying around. P.s I did not want to Roll my fenders or hve neg- camber . But i Will this look good with my drop and choice of rims/tire size?

Thnx

i cant look at the picture right now because im at work and apparently carmax wont let you look at pictures...fail.

anyway does it have a poke on it? i dont mind rolling the fenders at all..i love that poked out look.

ill look again when i get home