Will It Fit Thread
#4727
Registered Zoom Zoomer
iTrader: (2)
The OEM are 18x8 +50.
As cited 275x35x18 is a very common fitment on 18x9.5 +45 Enkei RPF1 rims. No rolling/camber needed with Toyo T1R tires at stock height or even a bit lowered.
As cited 275x35x18 is a very common fitment on 18x9.5 +45 Enkei RPF1 rims. No rolling/camber needed with Toyo T1R tires at stock height or even a bit lowered.
the other option i was looking at was a the 18x9.5 +45 RPF1's. would either of those tires have a proper fit? another concern i was thinking about, is that, +45 is the factory offset correct? i've been looking into a stoptech kit for the front (i deal with them on a wholesale level, so, prices are worth it) and it lists working with the factory wheels only with a 15mm spacer added.
#4728
Registered Paratrooper
Join Date: Apr 2008
Location: Fort Bragg, North Carolina
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
How much clearance is there from the hub to the inside of the wheel well before rubbing becomes an issue? I know this depends big time on the diameter of the wheel, but maybe just a rough estimate. I'm looking at all kinds of wheel and tire setups and I figured maybe instead of posting 50 times in this thread, someone could help me be able to figure it out on my own.
I know how sizes and offsets work for rims as well as tire sizes so that's not an issue, I just don't know the max limits for the 8.
Maybe if someone knowledgeable on this subject could post some guidelines it would help everyone with questions out a little bit more.
Just a suggestion, whether that's even a practical thing to do I have no idea. Any input would be helpful.
Thanks,
Ryan
I know how sizes and offsets work for rims as well as tire sizes so that's not an issue, I just don't know the max limits for the 8.
Maybe if someone knowledgeable on this subject could post some guidelines it would help everyone with questions out a little bit more.
Just a suggestion, whether that's even a practical thing to do I have no idea. Any input would be helpful.
Thanks,
Ryan
#4730
Registered Paratrooper
Join Date: Apr 2008
Location: Fort Bragg, North Carolina
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
I think what I'd like to achieve is a fitment that's as aggressive as possible without the hack job of grinding. I think it looks like ****, whether you see it or not just looking at the car, I still know it's there and that bothers me, so I do not want to go that route if possible. However, a roll never hurt anything I suppose, so that'd be fine.
Now I know to run a 17x10 +25 all the way around would require grinding, so my question is, can I do 17x9 with maybe like a +30 mm offset and be okay with just a roll or what?
The tire size obviously has a huge roll in this, and I'd like as much meat as possible to be on that fitment as well.
ANY help would be greatly appreciated. I've been trying to figure this out on my own without going through almost 200 pages of fitments and without having my car to measure on.
Thanks,
Ryan
#4735
Registered Paratrooper
Join Date: Apr 2008
Location: Fort Bragg, North Carolina
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
Awesome, thanks for the info Atilla. Looks like I will have to talk to the guys who go to the track to really find out what I can fit. I'm going to be getting Bilstein PSS9's as well, so I'll be about 1.5"+ lower than stock which is yet another factor. There are quite a few guys running those however so I'm sure I can find out something.
I just have one more question...I know that the second number on a tire size is the actual height of the tire from the rim (thickness I guess you could say) but how is it measured exactly? Isn't it the percentage of the width? Ex: 255/40R17. The tire is 40% as thick as it is wide? That doesn't seem right, but that's what I thought it was, or is it measured in MM as the width is?
Thanks again, you're very helpful.
Ryan
I just have one more question...I know that the second number on a tire size is the actual height of the tire from the rim (thickness I guess you could say) but how is it measured exactly? Isn't it the percentage of the width? Ex: 255/40R17. The tire is 40% as thick as it is wide? That doesn't seem right, but that's what I thought it was, or is it measured in MM as the width is?
Thanks again, you're very helpful.
Ryan
#4739
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 252 Likes
on
110 Posts
Width is millimeters, sidewall number is the percentage of the width.
So 225/45/18 is 225 millimeters wide, the sidewall is 45% of that, or 101.25 millimeters, and fits a rim with a diameter of 18 inches,
So 225/45/18 is 225 millimeters wide, the sidewall is 45% of that, or 101.25 millimeters, and fits a rim with a diameter of 18 inches,
#4744
Super Moderator
For those who have Changed Wheel Rim Size (from 18") to RX-8 R3 19", or whatever size, you should have your PCM (ECU) Re-Calibrated, which will correct your Speedometer Reading among other things.
These are the Details..
https://www.rx8club.com/showthread.p...77#post3582077
Sorry ..I know this is probably a re-post...this is the first time I have posted in this section (I think)...Senior Moment!
These are the Details..
https://www.rx8club.com/showthread.p...77#post3582077
Sorry ..I know this is probably a re-post...this is the first time I have posted in this section (I think)...Senior Moment!
#4750