Will It Fit Thread
#5579
Ok.. SOOOOO....
here comes that question...
I have a set of 17x8 and 17x9 Volks Racing Wheels from the 1990s GR.CV (directly from Japan) that I had on my FC then to a FD.. now... I want to put on my SE (I know these rims have gone through the lines of Rotaries, but I love them)....
SO... I believe I have +5mm spacer in the front and +10mm spacer in the rear. When it was on my FC & FD. Question now WILL IT FIT on the SE3P.
I did some calculation ... only way to have about the same diameter of my stock 18" is to have 255/45s with a -.2% difference. Am I gonna clear? I want to keep it non-stagger, because with the calculation anything other than 255/45s I have a huge change in the diameter (unless someone knows how to recal the speedometer :D )
Sorry I don't know know the offset off hand right now...
here comes that question...
I have a set of 17x8 and 17x9 Volks Racing Wheels from the 1990s GR.CV (directly from Japan) that I had on my FC then to a FD.. now... I want to put on my SE (I know these rims have gone through the lines of Rotaries, but I love them)....
SO... I believe I have +5mm spacer in the front and +10mm spacer in the rear. When it was on my FC & FD. Question now WILL IT FIT on the SE3P.
I did some calculation ... only way to have about the same diameter of my stock 18" is to have 255/45s with a -.2% difference. Am I gonna clear? I want to keep it non-stagger, because with the calculation anything other than 255/45s I have a huge change in the diameter (unless someone knows how to recal the speedometer :D )
Sorry I don't know know the offset off hand right now...
Last edited by mbze430; 10-25-2010 at 04:07 AM.
#5580
Pew Pew Pew
iTrader: (10)
Use this and I will help you
1. Is the car an rx8? If no, go somewhere else.
2. Is the car not stock height? If no, then explain.
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
4. Please state wheel width, offset, and diameter.
5. Please state the proposed tire width and profile.
6. Is the hub size 67.1mm or larger?
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
From now on, you must answer all those questions or I will tell you to go screw yourself.
1. Is the car an rx8? If no, go somewhere else.
2. Is the car not stock height? If no, then explain.
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
4. Please state wheel width, offset, and diameter.
5. Please state the proposed tire width and profile.
6. Is the hub size 67.1mm or larger?
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
From now on, you must answer all those questions or I will tell you to go screw yourself.
#5581
rx8
hey guys i have an 2004 rx8 no mods except mags. the mags are 18 inch x 9 with 35+ offset. The tire are 245/40ZR18 (so 40 profile height) my question is am i able to lower the car without rubbing also what should i setup should i get.(springs vs adjustibles)(and any that have doesn't change how the car drive by much). Thanks
#5584
Pew Pew Pew
iTrader: (10)
Yea so I got some rims that were once on a Jeep Cherokee. I'm not sure what year Jeep or how they fit on that Jeep, but I'd like to know if it will sit flush on my stock suspension RX8? I don't want to roll my fenders and I want to lower my car approximately 6.5" come summer time. Also, what size tires can I run? Thanks.
#5587
Registered
Join Date: Oct 2010
Location: Santa Clarita, CA
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
OK, my turn to ask:
1.- Yes, 2006 RX8
2.- Stock height
3.- They have not been modified, "maybe" I would be willing to modify them (rather not).
4.- Work VS-XX. Front 18x8.0; Rear 18x8.5 +45mm.
5.- It has 235/40R18 in the front. In the back, the previous owner left the original tires, 225/45R18. These, need to be replaced pretty soon. Originally I was thinking on going with the same size as in the front, but since the wheels are thicker, should I go 245/40R18? Do you recommend any other size?
6.- 67.1
7.- Bolt pattern 5-114.3
Thanks!
Maui
1.- Yes, 2006 RX8
2.- Stock height
3.- They have not been modified, "maybe" I would be willing to modify them (rather not).
4.- Work VS-XX. Front 18x8.0; Rear 18x8.5 +45mm.
5.- It has 235/40R18 in the front. In the back, the previous owner left the original tires, 225/45R18. These, need to be replaced pretty soon. Originally I was thinking on going with the same size as in the front, but since the wheels are thicker, should I go 245/40R18? Do you recommend any other size?
6.- 67.1
7.- Bolt pattern 5-114.3
Thanks!
Maui
Use this and I will help you
1. Is the car an rx8? If no, go somewhere else.
2. Is the car not stock height? If no, then explain.
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
4. Please state wheel width, offset, and diameter.
5. Please state the proposed tire width and profile.
6. Is the hub size 67.1mm or larger?
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
From now on, you must answer all those questions or I will tell you to go screw yourself.
1. Is the car an rx8? If no, go somewhere else.
2. Is the car not stock height? If no, then explain.
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
4. Please state wheel width, offset, and diameter.
5. Please state the proposed tire width and profile.
6. Is the hub size 67.1mm or larger?
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
From now on, you must answer all those questions or I will tell you to go screw yourself.
#5596
Pew Pew Pew
iTrader: (10)
That's where you went wrong. Why the hell must it be 8 wide? Go to a VW forum and look at the people putting 235s on 11" wheels. I'm not sure if that is exactly correct, but they definitely put skinny tires on wide wheels. Oh and 0 offset is never gonna work with a 235/40. You would have seen that if you had spent even 3 seconds reading the posts in here.
Last edited by J8635621; 10-28-2010 at 11:42 AM.