Will It Fit Thread
#5626
Registered User
iTrader: (5)
Originally Posted by Ross_Dawg
I think 20mm spacers would be the better buy. Yes, the wheels will look like they are sticking out, but if you get coilovers that will disappear.
#5627
Pew Pew Pew
iTrader: (10)
I'm kind of obsessed with the whole "stance" look and I want to have it for myself. I love my wheels and don't plan on getting rid of them any time soon, so spacers are my only option I guess.
So would this look "bad" without coilovers? I'm don't know too much about them, but I'm assuming I would need more than a basic coilover that only adjusts ride height, right?
So would this look "bad" without coilovers? I'm don't know too much about them, but I'm assuming I would need more than a basic coilover that only adjusts ride height, right?
20mm spacers would make it just slightly more aggressive than Ross_Dawgs current setup (and similar to Sifu's SSRs) and he just went from s-techs to coilovers + spacers. He knows exactly what you are talking about and can help you. I'd recommend coilovers so you can lower the car more before the bigger spacers to complete the look. I don't think it will look good otherwise.
As far as coilovers, pretty much any of them will work. The only thing beyond height adjustment they give (as far as wheel fitment) is they make it stiffer. Get some good ones though so you don't regret getting crappy ones and waste even more money and time.
PS I only helped you because I started to help you way back when and I will see it through I guess. I'm not gonna resubscribe to this thread however and deal with the new guys who must be trolling and/or retarded, so send me PMs or something if you need my help anymore. Ross_dawg should be more knowledgeable for that particular situation though.
#5629
That's a lie
iTrader: (1)
grog if you are that obsessed with the stanced look coilovers is the way to go. I was on konis+tanabes with 18x10 +30 and it looked GREAT and it was low but it was not "stanced". and a LOT easier to drive around lol
spacers would be fine but you really need coilovers or you just cant go low enough![Dunno](https://www.rx8club.com/images/smilies/dunno.gif)
^2 cents
good luck tho its a fun project
spacers would be fine but you really need coilovers or you just cant go low enough
![Dunno](https://www.rx8club.com/images/smilies/dunno.gif)
^2 cents
good luck tho its a fun project
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Last edited by The Reverend; 11-11-2010 at 11:22 AM.
#5638
Rims would be ...
F: 19x8.5 + 30
R: 19x10 + 38
Tires would be ...
F: 225/40R19
R: 245/40R19
The rear is like almost a full inch higher than stock so I guess I'd have to roll em, but the front should be good.
F: 19x8.5 + 30
R: 19x10 + 38
Tires would be ...
F: 225/40R19
R: 245/40R19
The rear is like almost a full inch higher than stock so I guess I'd have to roll em, but the front should be good.
#5642
French Canadian
Join Date: Oct 2010
Location: Montreal, Qc
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
#5649
Pew Pew Pew
iTrader: (10)
1. Is the car an rx8? If no, go somewhere else.
2. Is the car not stock height? If no, then explain.
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
4. Please state wheel width, offset, and diameter.
5. Please state the proposed tire width and profile.
6. Is the hub size 67.1mm or larger?
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
From now on, you must try to answer all those questions.
2. Is the car not stock height? If no, then explain.
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
4. Please state wheel width, offset, and diameter.
5. Please state the proposed tire width and profile.
6. Is the hub size 67.1mm or larger?
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
From now on, you must try to answer all those questions.
#5650
Pew Pew Pew
iTrader: (10)
1. Is the car an rx8? If no, go somewhere else.
2. Is the car not stock height? If no, then explain.
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
4. Please state wheel width, offset, and diameter.
5. Please state the proposed tire width and profile.
6. Is the hub size 67.1mm or larger?
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
From now on, you must try to answer all those questions.
2. Is the car not stock height? If no, then explain.
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
4. Please state wheel width, offset, and diameter.
5. Please state the proposed tire width and profile.
6. Is the hub size 67.1mm or larger?
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
From now on, you must try to answer all those questions.