Will It Fit Thread
11-17-2010, 08:30 AM
#5651
1. Is the car an rx8? If no, go somewhere else.
YA IT IS.
2. Is the car not stock height? If no, then explain.
TEIN S TECH WITH TOKICO D
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
ROLLED.
4. Please state wheel width, offset, and diameter.
8.5x19 +21
9.5x19 +26
5. Please state the proposed tire width and profile.
This is what i need to know
6. Is the hub size 67.1mm or larger?
No idea!
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
Yes.
YA IT IS.
2. Is the car not stock height? If no, then explain.
TEIN S TECH WITH TOKICO D
3. Have the fenders been modified in any way? If no, are you willing to modify the fenders?
ROLLED.
4. Please state wheel width, offset, and diameter.
8.5x19 +21
9.5x19 +26
5. Please state the proposed tire width and profile.
This is what i need to know
6. Is the hub size 67.1mm or larger?
No idea!
7. Is the bolt pattern 5x114.3 aka 5x4.5"?
Yes.
11-17-2010, 06:03 PM
#5657
Registered User
Join Date: Sep 2010
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
http://www.gramlights.com/wheels/57m.../fitment2.html
can someone please help me out as i want this to be correct before ordering.
i'm looking for relatively with out problems, thinking 9.5" rear for sure,
maybe a little bit smaller up front.
please let me know what these fitment guides mean!
can someone please help me out as i want this to be correct before ordering.
i'm looking for relatively with out problems, thinking 9.5" rear for sure,
maybe a little bit smaller up front.
please let me know what these fitment guides mean!
11-17-2010, 06:20 PM
#5659
Disk Type - C is a "low disk" type - ie you get the maximum lippage for the offset. You will also have less room for brake calipers compared to A and B Disks.
The offset colums show the offset ranges - for example look at 18x9.5 with B disk face:
0 offset will result in a lip that is 104 millimeters (lip measurements are in the parentheses)
+42 offset will result in 62mm lip
So for gram lights you can pretty much choose ANY offset that is within the Custom Offset range
as far as what will fit for you read the rest of the thread
The offset colums show the offset ranges - for example look at 18x9.5 with B disk face:
0 offset will result in a lip that is 104 millimeters (lip measurements are in the parentheses)
+42 offset will result in 62mm lip
So for gram lights you can pretty much choose ANY offset that is within the Custom Offset range
as far as what will fit for you read the rest of the thread
11-18-2010, 06:33 PM
#5661
Registered
Join Date: Nov 2010
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Ive been thinking about trying out a set of 17x8 wheels because they are very light and would make it easier to lower my 8 alot without worry about rubbing. Does anyone know if there would be any disadvantages to this? Ive read about it some and it sounds like they should clear my stock brake setup fine.
11-19-2010, 10:22 AM
#5665
11-19-2010, 10:55 AM
#5667
Why do you need it explained? It is what it is. It won't change the physical world when you get an understanding. Just listen to what they said. If you want to understand where these answers come from please take the time to read even a couple pages of this thread. This has become a huge joke. I hope the thread gets shut down.
11-19-2010, 11:53 AM
#5669
The RX-8 is missed
iTrader: (3)
Join Date: Aug 2005
Location: Houston, TX
Posts: 2,084
Likes: 0
Received 0 Likes
on
0 Posts
Yes, but j and ross beat me too anything i would say 
like, omg rev, omg.
ha ha, so true, i don't frequent this as much as some of you guys, but its amazing how many times the same things get asked...like, what is the point of having all these pages if no one reads them??
i think you were ok until you threw the word "camber" in there, that'll just add to the confusion fire! 
like, omg rev, omg.
Why do you need it explained? It is what it is. It won't change the physical world when you get an understanding. Just listen to what they said. If you want to understand where these answers come from please take the time to read even a couple pages of this thread. This has become a huge joke. I hope the thread gets shut down.
11-21-2010, 09:18 PM
#5670
kOre
Join Date: Oct 2010
Location: Calgary, AB
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Just a quick question, how many mm's wider do i want my tire to be compared to my rim? Stock R3s are 225mm on 8'' width rims. So I was just wondering what kind of range I had if I were to get 8.5/10 width rims.
11-22-2010, 08:47 PM
#5671
Registered
Join Date: Mar 2010
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Might probably get flamed but, can anyone tell me more on the following:
1) Will a 17x7 +50 mm wheel fit? Yes I know it's lame and tucked - don't ask why!
I came across another post where Ross Dawg had commented that a 17x7 +55 would fit?? I'm more worried about brake caliper clearance than anything else!
2) Will a 17x7.5 +38 mm with a 225/45-17 tyre fit w/o fender rolling?
I'm just looking at what options I have.........
The car is on stock suspension, and should remain that way for a long time.
1) Will a 17x7 +50 mm wheel fit? Yes I know it's lame and tucked - don't ask why!
I came across another post where Ross Dawg had commented that a 17x7 +55 would fit?? I'm more worried about brake caliper clearance than anything else!
2) Will a 17x7.5 +38 mm with a 225/45-17 tyre fit w/o fender rolling?
I'm just looking at what options I have.........
The car is on stock suspension, and should remain that way for a long time.
Last edited by BlueSE3P; 11-22-2010 at 08:50 PM.
