That's why I was thinking the 255/35 in the rear... but what to do with the front. Gotta do some calculations...
|
245/40 all around is what you will end up doing. Maybe 255/40 in the back but it's not really worth it imo.
|
ok, sounds good. for 245/40 do i need to shave the rear tab?
|
It'll be close. It isn't hard and we can help you out on the barbecue day.
|
alright. now i just need to find the right 10mm spacer and 5mm spacer >_>
bonus points if anyoen can find a 5mm spacer that will work. idk if i need one with new lugs or since 5mm is so small are they fine by themselves? |
hold on ill find you some
5mm http://cgi.ebay.com/ebaymotors/5MM-W...Q5fAccessories 10mm search evolutionm.net and other evo forums for 10 mm project kics or similar with the studs built in. |
those 5mm dont work? they dont say 114.3 at least
|
nvm
|
lol They are on my car and work fine.
|
Enkei RP05 and Hankook Ventus V12
I'm having a fair bit of trouble sorting this out, just trying to find the widest Hankook Ventus V12 tires I can use with stock suspension and what size of RP05 rim I would need, I will roll the fender if I must as I am aiming to have the tire poke out from the fender, which means I will probably need to stretch the tire
SO I'm looking for the easiest aggresive setup I can get from that combo Thanks for helping! |
on stock suspension that will look bad
|
+7 on that.
|
what tire would go well with a 19x10 wheel?
|
someone told me a 245-35-19 would fit
|
you forgot a few things
|
Well sticking with the RP05 idea, I'm still aiming to get an aggresive fit, with either 18 or 19's which rim size and wrap would look good on stock suspension...
|
You're seriously gonna make us look it up? At least please show us the wheel sizes.
|
|
I have zero experience with this and I understand the offset but I would prefer to get it right the first time and hell I can post the results and pics for you guys as well..
|
19x9.5 +40 and then the tire is kinda hard because 275 or 265 isn't stretched like you want, 255/35 may be too tall if you ever lower it, 255/30 will look RETARDED, and 245/35 is unnecessary but it works. I have 245s on my 9.5 wide rims and it looks ok to me, granted I'm lowered a bit and have +28 offset. I think those prices are a bit high btw.
|
PS the pdf of the wheel sizes and spec on Enkei's site are not working for the rp05
|
if you can find some 19x9.5 +30 with 275/30/19 it might stick past the fender a little bit on stock height
|
it was a reference page for prices since the enkei site wasn't working :S I wouldn't buy there :P thanks though
|
It will stick past the fender FOR SURE. +40 will likely be even with the fender at stock height. I have pics Rev if you don't believe me.
|
ok so if I went with the 19x9.5 +30 rp05's I could fit 265/30/19's and it would be slightly stretched I think... at least more then the 275's and IF I have to I could use 5mm spacers to push it just a little more...
So if I go with that I shouldn't run into problems with rubbing or anything weird correct, any suggestions by all means, thats why I'm here |
All times are GMT -5. The time now is 05:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands