Will It Fit Thread
#6153
Read as much of the thread as I could, but 247 pages is quite a bit.
Need advice on whether these would fit with any rubbing or not, as I dont want to do any modifications to the fender at all and plan to stick to stock camber.
Will start off with stock springs, but later dropping with Tein H-Techs.
F/R: 18x9.5 +15 with 245/40/18
Wheels are MB Battle, a user here has this setup with a BB but Im not what he's full setup is.
The wheels also come in +23 offset as well.
Wheel noobie here.
Need advice on whether these would fit with any rubbing or not, as I dont want to do any modifications to the fender at all and plan to stick to stock camber.
Will start off with stock springs, but later dropping with Tein H-Techs.
F/R: 18x9.5 +15 with 245/40/18
Wheels are MB Battle, a user here has this setup with a BB but Im not what he's full setup is.
The wheels also come in +23 offset as well.
Wheel noobie here.
#6158
Registered Badass
iTrader: (1)
Looking back at a previous wheel/tire option i am considering.
car specs:
Tanabe springs, 1.5-2.0in drop
around -1.5 camber
17x9 +25 with 245/45/17 I know i will just need a roll and trim tab.
I just want to know if i can run a wider tire without pulling fenders?
car specs:
Tanabe springs, 1.5-2.0in drop
around -1.5 camber
17x9 +25 with 245/45/17 I know i will just need a roll and trim tab.
I just want to know if i can run a wider tire without pulling fenders?
#6164
That's a lie
iTrader: (1)
what are you some kind of sick wheel fitment stalker
i talked to mike at sevenstock, hes at 18x11 +23, he rolled iirc tho but did not touch his camber. he's only on springs. and tires were stretched idr what size
so i guess to the original question the answer is no one lol
i talked to mike at sevenstock, hes at 18x11 +23, he rolled iirc tho but did not touch his camber. he's only on springs. and tires were stretched idr what size
so i guess to the original question the answer is no one lol
#6165
Pew Pew Pew
iTrader: (10)
Rev maybe you know the answer to this question.....I was thinking about getting some wheels and want to know how to read this accurately. http://www.rayswheels.co.jp/2009/pro...9&for=domestic
So face C will work for our car but will not work for Evos/STI/Supra/Skyline, right? So if I got a Face C it would severly limit my market if I decided to sell them?
So face C will work for our car but will not work for Evos/STI/Supra/Skyline, right? So if I got a Face C it would severly limit my market if I decided to sell them?
#6168
10.5 wide with 265/275 tyres with stock camber and no fendermods/scrubbing.
Im surprised he can get away with going this wide.
Looking to drop on Tein H-Tech, hopefully I can get away with a similar setup or slightly smaller.
Does the member have any photos of this setup?
Im surprised he can get away with going this wide.
Looking to drop on Tein H-Tech, hopefully I can get away with a similar setup or slightly smaller.
Does the member have any photos of this setup?
#6169
Pew Pew Pew
iTrader: (10)
1st off....that's a retarded amount of tire for a nonFI car. 2nd...he is lowered on s-techs and that makes a tiny bit of difference but I don't think he mentioned running extra camber. 3rd...it will stick out past the fenders on stock height but won't rub when under load. 4th...he has a ton of pictures Nuke0907 or something like that http://www.vertex-usa.com/customers-....html#more-819
#6170
Registered
iTrader: (17)
Join Date: Nov 2009
Location: The Big Apple
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone tried:
Front: 19 x 8.5 with 235/35/19 offset 20
Rear: 19 x 10 with 255/35/19 offset22
With stock spring and shocks ? or with Tokico D-specs and Tein S-Tech springs ? Right now I have the stock set up and was planning on gettin this wheel set up, but also plan on getting that second suspension set up I mentioned in the very near future....
I'm pretty sure with the drop I would need rear fender rolling but I think with the stock suspension I should be fine. What do you guys think ?
Front: 19 x 8.5 with 235/35/19 offset 20
Rear: 19 x 10 with 255/35/19 offset22
With stock spring and shocks ? or with Tokico D-specs and Tein S-Tech springs ? Right now I have the stock set up and was planning on gettin this wheel set up, but also plan on getting that second suspension set up I mentioned in the very near future....
I'm pretty sure with the drop I would need rear fender rolling but I think with the stock suspension I should be fine. What do you guys think ?
Last edited by CVale127; 02-17-2011 at 06:43 PM. Reason: New info
#6171
Thanks J.
Im looking at a similiar wheel setup but not so much rubber. Looking at 255 max for rubber and 10" wide max.
I'll have to do some more research so I don't get wheels that dont fit.
Im looking at a similiar wheel setup but not so much rubber. Looking at 255 max for rubber and 10" wide max.
I'll have to do some more research so I don't get wheels that dont fit.
#6172
Registered Toker
iTrader: (2)
Has anyone tried:
Front: 19 x 8.5 with 235/35/19 offset 20
Rear: 19 x 10 with 255/35/19 offset22
With stock spring and shocks ? or with Tokico D-specs and Tein S-Tech springs ? Right now I have the stock set up and was planning on gettin this wheel set up, but also plan on getting that second suspension set up I mentioned in the very near future....
I'm pretty sure with the drop I would need rear fender rolling but I think with the stock suspension I should be fine. What do you guys think ?
Front: 19 x 8.5 with 235/35/19 offset 20
Rear: 19 x 10 with 255/35/19 offset22
With stock spring and shocks ? or with Tokico D-specs and Tein S-Tech springs ? Right now I have the stock set up and was planning on gettin this wheel set up, but also plan on getting that second suspension set up I mentioned in the very near future....
I'm pretty sure with the drop I would need rear fender rolling but I think with the stock suspension I should be fine. What do you guys think ?
#6175
mkuhnracing.com
iTrader: (3)
1st off....that's a retarded amount of tire for a nonFI car. 2nd...he is lowered on s-techs and that makes a tiny bit of difference but I don't think he mentioned running extra camber. 3rd...it will stick out past the fenders on stock height but won't rub when under load. 4th...he has a ton of pictures Nuke0907 or something like that http://www.vertex-usa.com/customers-....html#more-819
So I guess my 295 Hoosiers are too big huh