|
i think hes 9.5 +15
that ride height wont be much of a problem |
1 Attachment(s)
Hey Grog, just did a quick measurement and I was way off on clearance... looks like 3.3" at lowest spot. Still cant go over any type of speedbump but it's more manageable than I thought.
Attachment 248405 |
Negro pulled out a yardstick!!! Damn son edit: Ross, to add insult to injury here my apartment just put in speedbumps where I leave the building. Now I HAVE to go the way I showed you.
|
I was going to say, 1.5" requires serious dumpage lol.
|
Originally Posted by j8635621
(Post 3890883)
The tires would obviously work on the rims (width and diameter = same) but they may not fit the car since you didn't give us the offset of the hypothetical rims you might get later.
You didn't find the answer to this question because you don't understand what offset means I guess. The "answer" is everywhere in this thread lol. Like Rev said....10.5 +22 is not gonna happen without lots of work and having your car lowered to the ground.............................and 275s on those? That makes me question your sanity. Im still new to aggressive fitments so forgive my poor judgement lol. As of right now im just searching and seeing what specs people are running and seeing how i want my set up to look like. :wallbash: |
I managed to find an old picture in the thread that I bought my TE37 reps from, this guy is 18x9 +15 and it looks like it worked out pretty well... I'll only be 1mm higher lol
http://sphotos.ak.fbcdn.net/hphotos-..._6120756_n.jpg He doesn't look too low either so I think I just might go with this offset. Wish I could see pictures from other angles though. I PMed the guy about them so hopefully he still lurks Also thanks a lot for clearing that up Ross. Gotta zig zag those speed bumps or do you just have to avoid them completely? haha |
1 Attachment(s)
Originally Posted by tiltmode43
(Post 3890974)
I was going to say, 1.5" requires serious dumpage lol.
Attachment 248401 |
:rofl: epicc
|
If there was a pepple in the road, my car would scrape on it lol
|
^only way i would roll
|
Originally Posted by Grog
(Post 3890995)
Also thanks a lot for clearing that up Ross. Gotta zig zag those speed bumps or do you just have to avoid them completely? haha
|
will this fit?
willing to roll fenders btw. 20x8.5 front and 20x9.5 rear both with 40mm ofset and 245.30.20 tires? |
Originally Posted by Ross_Dawg
(Post 3891578)
If the speed bump is taller than 3 inches, I will get stuck. Most are, so I avoid speed bumps altogether. It sucks having to throw it in reverse with cars behind you going "WTF!?"
|
Originally Posted by Svenni_Tiger
(Post 3891765)
will this fit?
willing to roll fenders btw. 20x8.5 front and 20x9.5 rear both with 40mm ofset and 245.30.20 tires? |
Originally Posted by Ross_Dawg
(Post 3891882)
Fronts will fit no problem; you can fit 265/30's in the rear with just rolled fenders and shaved rear fender tabs if you want...
with 245.30.20 in rear. streched? |
245s will work but are unnecessarily thin.
|
Originally Posted by Svenni_Tiger
(Post 3892078)
can i do this with tanabe nf's?
with 245.30.20 in rear. streched? |
Originally Posted by j8635621
(Post 3892128)
245s will work but are unnecessarily thin.
Originally Posted by Ross_Dawg
(Post 3892337)
If you want wheels with stretched tires, then by all means go for it, I was merely telling you that you can put a 265 on there no problem.
i already bought the 245.30.20 all around. thats why i asked hehe :) bought the new enkei lusso http://www.streetdreams.org/wheels/r...chined%2520Lip |
Originally Posted by Svenni_Tiger
(Post 3892378)
i already bought the 245.30.20 all around. thats why i asked hehe :)
|
heres what i have, 19x8.5 and 19x9.5
with 235/35/19 all around. on tanabe sustec pros the rears sit pretty flush but i still think i need spacers on front but i dont know the offset. help http://img233.imageshack.us/img233/3...g0125ed.th.jpg http://img696.imageshack.us/img696/4...g0127sp.th.jpg |
lolololololololololololololol I have some sweet Jordans that don't fit. I'm mexican. Can you help?
|
Originally Posted by Ross_Dawg
(Post 3892407)
Ah, gotcha :p:
|
Quick question. Looking to get a aggressive fitment for my summer rims. 19x9.5 front and 19x10.5 rears with +22 all around. Will these fit with a rolled fender ? Apparently from what tiltmode told me its going to be alot of work, but how much work exactly. I wouldnt mind going with a higher offset but the rims im getting (volk ce28n genesis) only come in +22 for 19s :(.
|
It would be MUCH easier to fit 9.5 +22 all around... assuming you have coilovers and access to alignment, you can fit 9.5 +22 all around with 245's with just rolled fenders and shaved rear tabs.
You can throw the 10.5 on the rear with a 255 if you pull the fenders and add camber though. |
I was interested in running 275 for the rear. I want something really wide. But i dont want stretched tires at all. I want a perfect fit if that makes sense.
I might consider 9.5 all around though but i wanted to go staggered :dunno: |
| All times are GMT -5. The time now is 09:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands