RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Wheels, Tires, Brakes & Suspension (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/)
-   -   Will It Fit Thread (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/will-fit-thread-133500/)

isays 06-12-2011 09:59 PM

ok, hopefully last time i have to ask, i'll talk specifics now.

The rims I'm thinking of getting are the Enkei Performance KLAMP
18x1.8
Offset: +42mm
Backspacing: 6.37"

the tires I'm thinking of are:
ExtremeContact DW
245/40ZR18

this is for both front and rear.

Stock suspension and setup.

is that going to work? That offset seems large, but thats what tirerack recommended...

I'm going for a 245/40/18 setup, any better suggestions for rims in the same price-range?

J8635621 06-13-2011 07:18 AM

18x1.8? That offset is pretty close to stock aka exactly what Tire Rack is gonna tell you. That's definitely going to fit. Will it look the best? Probably not.

isays 06-13-2011 07:47 AM


Originally Posted by J8635621 (Post 4003937)
18x1.8? That offset is pretty close to stock aka exactly what Tire Rack is gonna tell you. That's definitely going to fit. Will it look the best? Probably not.

sorry, 18x8.5.
haha, donno how i messed that up

well, i'll keep looking a bit then. I really liked the enkei performance lusso, but they only came in 8" and 9", no 8.5.... and i figured 18x9 40+ would be too large for the front.

J8635621 06-13-2011 08:06 AM

It's not

isays 06-13-2011 06:16 PM


Originally Posted by J8635621 (Post 4003973)
It's not

even in stock suspension without rolling? I just went and did a rough measurement, 18x9 +40 seems too big for the front, with 245/40 tires... it was just a rough measurement, but it didnt seem like there was that much space over stock rims/tires. i wanna take this out to the track at some point so I want full suspension travel.

are other people running series I with that in the front without any modification and without issues? (this thread is way too long to search all of, i tried for a while and gave up)

sorry, your reply was just so terse that I have a hard time believing it...

J8635621 06-13-2011 06:44 PM

Go rough measure again? I don't know what to tell you. 9.5 +45 with 275s fits on a perfectly stock car.

MazdaManiac 06-13-2011 06:50 PM


Originally Posted by J8635621 (Post 4004542)
Go rough measure again? I don't know what to tell you. 9.5 +45 with 275s fits on a perfectly stock car.

Not in the front it wont.
It will rub on the inside of the wheel wells at something significantly less than full lock.

J8635621 06-13-2011 07:03 PM

??? Do I need to find pictures?

tiltmode43 06-13-2011 07:19 PM


Originally Posted by MazdaManiac (Post 4004555)
Not in the front it wont.
It will rub on the inside of the wheel wells at something significantly less than full lock.

When significantly lowered*

J8635621 06-13-2011 07:27 PM


Originally Posted by tiltmode43 (Post 4004583)
When significantly lowered*

Even Team used them and was pretty low. I'm not sure if they were 265 or 275s. I'm sure he never rubbed or modified the fenders though because that would be r3tard3d and juv3nil3
http://pic17.picturetrail.com/VOL846.../224117123.jpg

MazdaManiac 06-13-2011 07:53 PM


Originally Posted by tiltmode43 (Post 4004583)
When significantly lowered*


No. All the time.

Even 265 will rub the inside of the wheel wells when at full lock.

Hell, I can get 255's on 42mm offset 9" to rub the inside with the suspension loaded in a turn!

I think that most people that will put 275s on the front of their car are posers anyway. So, fully loading the suspension probably wont happen.

J8635621 06-13-2011 08:13 PM

Yea your car must turn harder than all the other rx8s ever built.

RX8inSTL 06-13-2011 10:33 PM

So I am being a little lazy but I hope someone answers this, anyway im thinking about getting an aggressive set of wheels and have just been looking around. Came across these.

http://zilvia.net/f/wheels-tires/388...lipop-red.html

I already have my fenders rolled some but can do more since im sure id have to. Just dont know if id have to run a lot of negative camber or not. Plus is the tire size on them good or would I be better off running a 45 series?

slvrstreak 06-15-2011 07:31 AM

19X8.5 30mm wrapped in Falken 452s 245/35/19
lowering on Progress Tech springs -1.3F, -0.8R
will it still fit?

J8635621 06-15-2011 07:35 AM

Offset noob. You say still fit so what are you lowered on now?

slvrstreak 06-15-2011 07:42 AM

beat ya to it
stock right now...putting the springs on this weekend
crossing my fingers that i wont need a roll...should be close

J8635621 06-15-2011 07:49 AM

Should be fine

slvrstreak 06-15-2011 08:07 AM

:worship: :jump: :suitdance:us4allswi:bigok: :rock: :101384_l:
thanks J

Kahl 06-17-2011 04:23 PM

Work CR kai 18x9.5 +38 all around on 245 40 18 hankook v12's?

I am a complete tire noob and was directed to this thread... I basically chose numbers of the rim sizes I've seen that I like and I like rx 8speciale's tires from here:
https://www.rx8club.com/forum/showthread.php?t=212553


Would it be better if I changed any numbers around? I'm being serious when I say I'm a complete noob. Also would it look dumb on the stock suspension? If so, feel free to recommend some stuff for me to lower (I don't want to scrape all over the place though, there are some bad roads around here).

Thanks.

The Reverend 06-17-2011 04:27 PM

read through the thread for a couple hours and you will get a good idea of what fits :)

but yes that should fit easily, be aware that 245s on a 9.5 wheel will look a little bit stretched so make sure that is a look you want before you buy the setup

Kahl 06-17-2011 05:21 PM


Originally Posted by The Reverend (Post 4007935)
read through the thread for a couple hours and you will get a good idea of what fits :)

but yes that should fit easily, be aware that 245s on a 9.5 wheel will look a little bit stretched so make sure that is a look you want before you buy the setup

What do you mean stretched? What would look better? Thanks

J8635621 06-17-2011 05:27 PM

Look up RX8Soldier or SoldierRX8....something like that. He has the same fitment and suspension setup you are asking about. If you aren't planning on lowering the car much, 255/40 all around could work.

The Reverend 06-17-2011 05:34 PM

see it feels gud to be nice j

Kahl 06-17-2011 07:43 PM

I like the look of the tires here:
https://www.rx8club.com/forum/showthread.php?t=212553

Those rims are similar looking o the ones I'll be getting too. Is that the stretched look you're talking about?

ElSuaveChino 06-17-2011 09:37 PM

19x9.5 front 245/35/19 +30

19x10.5 rear 275/35/19 +40


All times are GMT -5. The time now is 07:20 AM.


© 2024 MH Sub I, LLC dba Internet Brands