Will It Fit Thread
#7377
thats prolly what im going to go with.
would a 265/40/18 work maybe? i was just thinking that that 40s would be a better better since i had 235/35/19s on a 19/8 eta 40 and it looks to skinny for me
would a 265/40/18 work maybe? i was just thinking that that 40s would be a better better since i had 235/35/19s on a 19/8 eta 40 and it looks to skinny for me
#7381
well, i did state in my first post that i would like to get 40s on there and i would like to fender roll to get the fattest tire i could on it since i really liked the look when i test fitted the rims with the 285/40/18 but it looked like those wouldnt fit even with a fender roll.
SOOO, what could i then if fact go with a 275/40/18 or the 265/40/18 if i roll in my fenders to get SUPERFLUSH or would the extra tire cause the speedometer to be off and reduce performance?
Thanks champ.
![](http://img20.imageshack.us/img20/5055/wallpaperjokerbatmankil.th.jpg)
Uploaded with ImageShack.us
SOOO, what could i then if fact go with a 275/40/18 or the 265/40/18 if i roll in my fenders to get SUPERFLUSH or would the extra tire cause the speedometer to be off and reduce performance?
Thanks champ.
![](http://img20.imageshack.us/img20/5055/wallpaperjokerbatmankil.th.jpg)
Uploaded with ImageShack.us
#7382
Pew Pew Pew
iTrader: (10)
I don't suggest doing things that make no sense. I don't suggest doing either of those as they are taller than stock and don't make it more flush in any sense. Keep it up slugger
PS: did you skip the part where I said you don't know what the 40 really means?
PS: did you skip the part where I said you don't know what the 40 really means?
Last edited by J8635621; 08-18-2011 at 09:38 PM.
#7386
I have a 2004 rx8 i have not changed the suspension or anything like that. just looking to change the wheels.
ROTA Wheel P45F 18x8 (5x100+48mm, 56.1 Hub) will this work and what kinda tires would i need? thanks.
ROTA Wheel P45F 18x8 (5x100+48mm, 56.1 Hub) will this work and what kinda tires would i need? thanks.
#7389
Mile High Eight
I am looking ahead here for winter wheels and tires, so I have some questions.
I am pretty much just looking at used OEM wheels on craigslist. I found some G35 sedan wheels off a 2003. They are 17x7, and my research leads me to believe they are +45.
Will these work/fit with 215/55R17's for winter?
And on that note, can you give me a range of offsets that will work for the rx8 for 17x7 to 17x8? Thanks!
I am pretty much just looking at used OEM wheels on craigslist. I found some G35 sedan wheels off a 2003. They are 17x7, and my research leads me to believe they are +45.
Will these work/fit with 215/55R17's for winter?
And on that note, can you give me a range of offsets that will work for the rx8 for 17x7 to 17x8? Thanks!
#7391
Registered
iTrader: (1)
Thinking of getting the OZ Alleggerita 18" rim with Hankook K110 combo.
These rims come in 18 x 8 with a 48mm offset, so I'm sure I could use the popular combo of this with a 245/40R18 tire. It also comes in an offset of 35mm, which would probably fit and look better, right?
I kind of wanted to go with a 255/40R18 tire though, but this would probably be a bit much for an 8" wide rim. Worth it to go up to 255? Daily driver with possibility of some tracking. 255 would also be a spot on circumference match with the stock tire size.
Next size up in the Alleggeritas is an 18 x 8.5, but with offsets of 30 and 55. Would either of these work with a 255 tire? 55 might rub on the inside, but 30 might rub on the outside.
Would appreciate any advice, thanks!
Again, possible combos are:
18 x 8, 48 offset with 245/40R18 --> standard combo, works for sure
18 x 8, 35 offset with 245/40R18 --> ???
18 x 8.5, 30 offset with 255/40R18 --> ???
18 x 8.5, 55 offset with 255/40R18 --> ???
These rims come in 18 x 8 with a 48mm offset, so I'm sure I could use the popular combo of this with a 245/40R18 tire. It also comes in an offset of 35mm, which would probably fit and look better, right?
I kind of wanted to go with a 255/40R18 tire though, but this would probably be a bit much for an 8" wide rim. Worth it to go up to 255? Daily driver with possibility of some tracking. 255 would also be a spot on circumference match with the stock tire size.
Next size up in the Alleggeritas is an 18 x 8.5, but with offsets of 30 and 55. Would either of these work with a 255 tire? 55 might rub on the inside, but 30 might rub on the outside.
Would appreciate any advice, thanks!
Again, possible combos are:
18 x 8, 48 offset with 245/40R18 --> standard combo, works for sure
18 x 8, 35 offset with 245/40R18 --> ???
18 x 8.5, 30 offset with 255/40R18 --> ???
18 x 8.5, 55 offset with 255/40R18 --> ???
Last edited by devtec; 08-27-2011 at 05:24 PM.
#7393
Hello everyone,
SPECS: "2004 RX8 (performance package) on Eibach Springs 1.2-inch Drop in the front and rear"
USED AS: Daily Driver
Will 18"x9.5 +20 all around fit? Will i need my fenders rollled? and what size tire will be good
((as flush as possible)) for the winter with this set up?
Thank you in advance.
SPECS: "2004 RX8 (performance package) on Eibach Springs 1.2-inch Drop in the front and rear"
USED AS: Daily Driver
Will 18"x9.5 +20 all around fit? Will i need my fenders rollled? and what size tire will be good
((as flush as possible)) for the winter with this set up?
Thank you in advance.
Last edited by Vangard112; 08-31-2011 at 03:24 AM.
#7394
Can someone confirm if my calculations are right.
I've been calculating offsets. Would this be how much more in MM the wheels would stick out towards the fender from the stockies?
18x8.5 +35 - 21.25mm
18x8.5 +30 - 26.25
18x8.5 +25 - 31.25mm
18x9 +35 - 27.5mm
18x9 +30 - 32.5mm
18x9.5 +35 - 33.75mm
18x9.5 +30 - 38.75mm
Looking to go flush as possible, with no fender work, no camber, no shaving.
Lowered - Tein S-Tech (F:1.4", R:0.7")
Wheels - F: 18x8.5 +25 (235/40) , R: 18x9.5 +35 (245/40)
I've heard of a few people running 18x8.5+35/18x9.5+35 but front isn't flush, so I want to drop that front offset a bit more to +25 if I can without and scrubbing. I'd even drop the rear to +30 if that's possible too
I've been calculating offsets. Would this be how much more in MM the wheels would stick out towards the fender from the stockies?
18x8.5 +35 - 21.25mm
18x8.5 +30 - 26.25
18x8.5 +25 - 31.25mm
18x9 +35 - 27.5mm
18x9 +30 - 32.5mm
18x9.5 +35 - 33.75mm
18x9.5 +30 - 38.75mm
Looking to go flush as possible, with no fender work, no camber, no shaving.
Lowered - Tein S-Tech (F:1.4", R:0.7")
Wheels - F: 18x8.5 +25 (235/40) , R: 18x9.5 +35 (245/40)
I've heard of a few people running 18x8.5+35/18x9.5+35 but front isn't flush, so I want to drop that front offset a bit more to +25 if I can without and scrubbing. I'd even drop the rear to +30 if that's possible too