J8635621

iTrader: (10)

I'm never gonna answer a question for you. You don't even try to give me the necessary info.

Hydr0nium

I apologize,

Wheel Diameter (F/R):
18"/18"

Wheel Width (F/R):
9.5"/9.5"

Wheel Offset (F/R):
They are listed as +12/+20, but obviously can be switched around if needed.

Suspensions Changes:
Stock

They currently have 225/40/18, but that isn't nearly enough tire. I was thinking 255/40/18

J8635621

iTrader: (10)

Not gonna work at all.

Figs

After searching through the thread I think i just about got my answer fitment wise.
I'm going to be running 18X8.5 +30 on stock shocks with s-techs and I was wondering
if i would have any issues running stock 225/45 tires. Newb to the wheel business haha

J8635621

iTrader: (10)

No but you should run 245/40 instead

Figs

Planning on it once I've killed these tires, thanks

AwptiK

iTrader: (4)

Looking at:

F: 18x8.5+30
R: 18x9.5+35

And trying to figure out tire sizes..

I've been searching for an answer without having to ask, but I might as well be on the safe side before I spend $2k

I was thinking,
F: 245/40
R: 265/35

Any fitment issues or rolling needed?

-Dropped on S-Techs

Better suggestions are more than welcome.

J8635621

iTrader: (10)

Do the 9.5 +35 with 265s front and rear. May need a fender roll

AwptiK

iTrader: (4)

Alright thank you!

I know I've seen 9.5+35 with 275/35 and they had slight rubbing in the rear, we'll see how close I get.
(Same springs/rims on said car)

batangisip89

iTrader: (6)

Work CR-Kai Kiwami
18x9.5 +38 F+R
245/40 F+R
K-Sport Coilovers 1.5" Drop

Work CR-Kai Kiwami
18x9.5 +38 F+R
245/40 F+R
K-Sport Coilovers 2" Drop

J8635621

iTrader: (10)

10mm spacers remove rear bumper tab and roll fenders. I had the same setup

blais02

XXR 530

18x8.75 +35mm (F + R)

I want to know which tire to put on the four corners without rubbing.

I have stock coil spring but I planned to drop it of 1".

thanks

J8635621

iTrader: (10)

245/40

blais02

Will it look a little bit agressive ? And will I need to roll my fender ?

thanks

J8635621

iTrader: (10)

Better than stock. No rolling needed

blais02

Why not 255/40 ?

Piroxide

Rays RE30 Hyper Bronze
F/R: 18x9.5J+28 (17.7lbs)

Tire Options:
F/R: 265/35R18 Advan AD07 (26.2lb)
F/R: 245/35R18 Triangle TR968's (24lb)
F/R: 235/40R18 Federal 595's(26.5lb)

Stance GR+ Coilovers

Looking to have the tire tops even with the fenders, nothing too dramatic. Thinking the 9.5J+28 fronts might have been a bit too much for the AD07's as the tire profile is super square at almost 11"... Rolling fenders im ok with, I've done it to all 3 of my FD's, but I'm not looking to push the camber more than F:~-2.0 deg R:~-1.5 deg(my reading shows max stock camber adj. of around -1.7?)I leave the rest to the experts...

EricB

iTrader: (7)

been looking at varrstoen 2.2.1 at

[18x9.5+30] OR [18x9.5+22] WILL IT FIT?

I have oem suspension but may get springs in the future.

May get 245's or 255's, which do you guys suggest?

J8635621

iTrader: (10)

Not good if you lower the car

J8635621

iTrader: (10)

Those are very wide tires. Would require a pull and remove the rear bumper tab. You would also have to be lowered atleast 2 inches all around.

J8635621

iTrader: (10)

Lower the car first or those will look stupid

9kRotary_Venus

Drop: Front 1.75, Rear 1.5
Rim Diameter and Width: 17x9
Tire Size: 215/45/r17
Offset: +15
Basic Fender Roll and Stock Camber
Will it fit???

J8635621

iTrader: (10)

Probably. Will it look stupid? Definitely

9kRotary_Venus

lol, im tesst fittin it only, but i just wanted an opinion, i got two sets im looking to buy
18x8 +40 or 17x9 +15 or +20 i forgot what he said, gonna test both and see, but yeah
just wanted to get an opinion, thanks

mazdaspeed306

I want some work XD9's will 18x10 + 38 all around fit on stance gr+ coilovers?