Will It Fit Thread
#8551
Registered
Work Gnosis GS HS 201,
19x9 +20 all round
Bronze rim with brushed silver centres
245/35/19 tires
Car will be lowered about an inch all round with Ohlin's or Bilstien coilovers.
Will they fit with minimum mods. I only want to roll the fenders, no major work.
19x9 +20 all round
Bronze rim with brushed silver centres
245/35/19 tires
Car will be lowered about an inch all round with Ohlin's or Bilstien coilovers.
Will they fit with minimum mods. I only want to roll the fenders, no major work.
Last edited by BobsRX8GT; 07-29-2012 at 04:04 AM.
#8554
Registered
Just curious as to Why the lowering more than an inch required? Is it for clearance of suspension components?
Excuse my ignorance but what do you mean by fender tab. Is that all 4 wheels or fronts only?
Thanks for the help.
Excuse my ignorance but what do you mean by fender tab. Is that all 4 wheels or fronts only?
Thanks for the help.
#8555
If you want 19 x 9 bob try and get a higher offset like +35 and they should fit with just the guards rolled.
At least that is the case with 18's
At least that is the case with 18's
Last edited by shr3da; 07-31-2012 at 04:22 AM.
#8556
Registered
mmmmmm. This was the suggested fitment from Workwheels australia. Might have to look into a higher offset as I dont want to do too much modification.
I have tried to understand offset. Got a basic understanding but there are so many factors to consider.
I have tried to understand offset. Got a basic understanding but there are so many factors to consider.
#8557
Rew rew rew your boat
iTrader: (3)
19x9+35 or so will fit easy but will look sunken
19x9 +20 will look alot better, more flush with fender but will need fender liner mod, fender rolling and bumper tab trim like J said
lowerer it more than a inch for sure to eliminate tire gap, otherwise it will look stoopid
19x9 +20 will look alot better, more flush with fender but will need fender liner mod, fender rolling and bumper tab trim like J said
lowerer it more than a inch for sure to eliminate tire gap, otherwise it will look stoopid
#8559
Registered
19x8.5 +30 - 235/35/19
19x9.5 +25 - 265/30/19
I'm currently on Mazdaspeed springs (slightly lower than stock) with rolled fenders and no spacers and have no issues but I want to go lower (and the stock struts are trash in the rear...)
I am looking to buy the Powertrix coilovers and lower the car to get a nice stance. Will I need to run spacers for this to look good? Camber? I don't want wheel gap but I don't want to rub on every bump![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Thanks in advance! Current picture for reference:
19x9.5 +25 - 265/30/19
I'm currently on Mazdaspeed springs (slightly lower than stock) with rolled fenders and no spacers and have no issues but I want to go lower (and the stock struts are trash in the rear...)
I am looking to buy the Powertrix coilovers and lower the car to get a nice stance. Will I need to run spacers for this to look good? Camber? I don't want wheel gap but I don't want to rub on every bump
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Thanks in advance! Current picture for reference:
![Name: 205347_10151831468355411_890735474_n.jpg
Views: 104
Size: 95.3 KB](https://www.rx8club.com/attachments/series-i-wheels-tires-brakes-suspension-55/231315d1501231294-will-fit-thread-205347_10151831468355411_890735474_n.jpg)
Last edited by Phyrx; 07-31-2012 at 06:53 PM. Reason: Added picture.
#8560
also remember don't lower the car more than 25 - 30mm as if you care about handling
#8565
Can I get some help with
18x9.5 +15 all around
Greddy coilovers
Rear bumper tab shaved down.
I know guard work will have to be done but could I get a rough idea on how far they have to get pulled out.
18x9.5 +15 all around
Greddy coilovers
Rear bumper tab shaved down.
I know guard work will have to be done but could I get a rough idea on how far they have to get pulled out.
#8567
#8574
Legend In My Own Mind
You can't possibly be talking about anyone asking if like an 18x8 with a +45 would fit. That's crazy talk. I think longer studs and inside out wheels are what the cool kids are doing.