Will It Fit Thread
#9632
fitment question
okay I have an actual question if anyone can help. I want to buy motegi MR125 18x9 +35mm offset all the way around. I was told by motegi directly that these wheels will not fit my car. it has no modifications that would effect wheel fitment. car is not lowered. I have 225/40 tires. i see many people on here running a similar setup with no problems... was i lied to?
#9636
Vagitarian
iTrader: (1)
Ok two options here.
First my suspension: Tanabe Sustec Pro 5 coils. Dropped all the way down. 2.0" F 2.25"R
Goal. Flush stance with performance and limited stretching and or shaving. Willing to raise ride height slightly if needed. Will help save shine auto bumper anyway.
Wheels I am considering:
XXR 530s
18x8.25 +35 on all 4s
245/40s all around
Maybe 5 or 10mm spacers for proper stance
XXR 522s
18x9.5 +38 all 4s
245/40 F
275/35 R
Are my sizes correct and tire heights correct?
Thanks.
First my suspension: Tanabe Sustec Pro 5 coils. Dropped all the way down. 2.0" F 2.25"R
Goal. Flush stance with performance and limited stretching and or shaving. Willing to raise ride height slightly if needed. Will help save shine auto bumper anyway.
Wheels I am considering:
XXR 530s
18x8.25 +35 on all 4s
245/40s all around
Maybe 5 or 10mm spacers for proper stance
XXR 522s
18x9.5 +38 all 4s
245/40 F
275/35 R
Are my sizes correct and tire heights correct?
Thanks.
#9638
Vagitarian
iTrader: (1)
Spacers only cause I hate the sunken wheel look and the 530s only come 8.25 +35 or 9.75+20 which obviously won't fit.
Just lookin for best option advice.
#9642
Legend In My Own Mind
18x9.75s. 245/40R18s. S-techs at the moment. Fenders rolled, tabs "adjusted", and about 1.6 degrees of camber front and rear. Not sure if you would need any more work if lower but I have heavily weighed down the suspension to check and don't hit anything.
#9643
How did you adjust those tabs. I just picked up my 530s and need to roll and adjust stuff. 9.75s tho I'm trying to stay away from spacers
#9649
Registered
iTrader: (9)
What sort of work would the 8.75's require in a +20 offset? Im thinking about the following set ups:
XXR 530's in 18x8.75 +20 offset with a 245/40/18, Lowered on S-techs.
Or
XXR 530's in 17x9.75 +25 offset with a (unsure of proper tire size, 245/40/17?), suspension the same.
Fender rolling I'm ok with, dont want to do shaving/pulling though.
XXR 530's in 18x8.75 +20 offset with a 245/40/18, Lowered on S-techs.
Or
XXR 530's in 17x9.75 +25 offset with a (unsure of proper tire size, 245/40/17?), suspension the same.
Fender rolling I'm ok with, dont want to do shaving/pulling though.
#9650
What sort of work would the 8.75's require in a +20 offset? Im thinking about the following set ups:
XXR 530's in 18x8.75 +20 offset with a 245/40/18, Lowered on S-techs.
Or
XXR 530's in 17x9.75 +25 offset with a (unsure of proper tire size, 245/40/17?), suspension the same.
Fender rolling I'm ok with, dont want to do shaving/pulling though.
XXR 530's in 18x8.75 +20 offset with a 245/40/18, Lowered on S-techs.
Or
XXR 530's in 17x9.75 +25 offset with a (unsure of proper tire size, 245/40/17?), suspension the same.
Fender rolling I'm ok with, dont want to do shaving/pulling though.