Will It Fit Thread
#9703
Registered
iTrader: (2)
Join Date: Aug 2010
Location: Summerside, P.E.I.
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, wondering if guys can comfirm something for me. I'm looking at getting a set of stance sc-five wheels SC-5ive Matte Silver Machined Wheel - Stance Wheels 19" x 8.5 with 235/35 tires. Now the offset of these wheels concerns me because its listed at +35/+15. I don't know a whole lot about rims but I have been researching and this confuses me for it to have two listings. From what I've found it should fit if its +35 offset, and the over height shouldn't change with the reduced sidewall height... 225/45-R18 vs 235/35-R19 Tire Comparison - Tire Size Calculator forgive me if I'm asking stupid questions but I searched through over a 150 of these postings and was unable to find enough evidence for me to buy them. I'm lowered on koni yellows and tein s-techs (roughly 1.8" - 2") Any info would be greatly appreciated guys.
#9708
Hey guys not really sure what to do, first time looking for new tires and rims. I know I want motegi MR116 rims but I don't really want to go staggered. Most importantly I want to make sure these would fit since I'll be ordering online. Should I do:
18x8 with 225/45-18
Or
18-9 with 245/40-18
18x8 with 225/45-18
Or
18-9 with 245/40-18
#9710
Effin' Awesome User
I have a 2009 Sport. I'm looking to get an aggressive and flush stance. Something like tiltmode's stance on his various TE37s.
Wheels I'm looking at are 18x9.5 +32 all the way around, probably with a 225 to 245 series tire with a 35 or 40 sidewall. They are Motegi MR120s.
Will be sitting on Stance coils, with rolled and shaved fenders. Will it sit flush or will I need to run some camber?
Was looking at +22 offset in the same size wheel, but that would require a pull or significant camber, correct?
Wheels I'm looking at are 18x9.5 +32 all the way around, probably with a 225 to 245 series tire with a 35 or 40 sidewall. They are Motegi MR120s.
Will be sitting on Stance coils, with rolled and shaved fenders. Will it sit flush or will I need to run some camber?
Was looking at +22 offset in the same size wheel, but that would require a pull or significant camber, correct?
#9711
Hey i got a new set of rpf1 and thinking about what tires will fit.
18x9.5 +15 265/35 all around.
I am lowered on eibach pros with stock shocks but getting coilovers soon.
18x9.5 +15 265/35 all around.
I am lowered on eibach pros with stock shocks but getting coilovers soon.
Last edited by allaboutmoney; 06-12-2013 at 03:19 AM.
#9714
about to buy rims but dont wanna **** up, so any advice or comments on how these will fit. much appreciated:
Rims : 18" DIAMETER (18" x 7.5") front and rear.
tires : FRONT TIRE SIZE: 245/40ZR18 Y
REAR TIRE SIZE: 275/35ZR18 Y
Let me know if i there would be any problems with this sizes or what would be more recommened? thanks
also, what would the offset be? :s
Rims : 18" DIAMETER (18" x 7.5") front and rear.
tires : FRONT TIRE SIZE: 245/40ZR18 Y
REAR TIRE SIZE: 275/35ZR18 Y
Let me know if i there would be any problems with this sizes or what would be more recommened? thanks
also, what would the offset be? :s
Last edited by walter_g6; 06-12-2013 at 01:21 PM.
#9717
Pew Pew Pew
iTrader: (10)
about to buy rims but dont wanna **** up, so any advice or comments on how these will fit. much appreciated:
Rims : 18" DIAMETER (18" x 7.5") front and rear.
tires : FRONT TIRE SIZE: 245/40ZR18 Y
REAR TIRE SIZE: 275/35ZR18 Y
Let me know if i there would be any problems with this sizes or what would be more recommened? thanks
also, what would the offset be? :s
Rims : 18" DIAMETER (18" x 7.5") front and rear.
tires : FRONT TIRE SIZE: 245/40ZR18 Y
REAR TIRE SIZE: 275/35ZR18 Y
Let me know if i there would be any problems with this sizes or what would be more recommened? thanks
also, what would the offset be? :s
Awful choices all around. Get wider wheels and don't put wider tires in the rear than the front. Try again
#9718
What would you recommend, as I already have the rims, want a square set up, dont mind rolling my front fenders and trimming cuz I do work in a shop. Just wondering how much work to make it fit and if I should run thinner width all around.
#9719
Legend In My Own Mind
My turn to "help." My buddy runs a 235/40 on that same size and slammed. I have 245/40s on something similar but not so slammed. Both required a bit of rolling and cutting.
#9720
Modulated Moderator
iTrader: (3)
Wheels are quite narrow.....so you wouldn't want to run the 275 series tires for sure
Why wouldn't you go with a 9"- 9.5 wheel in the +35-40 offset area...with 245 series tires on all corners
That would allow proper rotation of the tires...and give you a nice flush look without hacking the car to bits
Why wouldn't you go with a 9"- 9.5 wheel in the +35-40 offset area...with 245 series tires on all corners
That would allow proper rotation of the tires...and give you a nice flush look without hacking the car to bits
Last edited by dannobre; 06-12-2013 at 04:05 PM.
#9721
Thanks for your input probably going with 245/40, do you have pics by any chance. Appreciate your help.
#9722
Legend In My Own Mind
#9725
Wheels are quite narrow.....so you wouldn't want to run the 275 series tires for sure
Why wouldn't you go with a 9"- 9.5 wheel in the +35-40 offset area...with 245 series tires on all corners
That would allow proper rotation of the tires...and give you a nice flush look without hacking the car to bits
Why wouldn't you go with a 9"- 9.5 wheel in the +35-40 offset area...with 245 series tires on all corners
That would allow proper rotation of the tires...and give you a nice flush look without hacking the car to bits