...anyone? :/

Both tire sizes are very close.. the 245's are a little bigger but not by much .. Check out "www.willtheyfit.com" and look at the 2 sizes compared to each other.. From what it looks like you might have to run a small amount of camber, but that will depend on how low you are..

It will work for certain without the spacers. Out of curiosity; why would you buy new wheels with the intention of running spacers? Why not buy wheels with a lower offset out of the box?

As I said I have the Koni's with the stechs (so about 2in drop in front and 1.3 in rear? idk) Ill check the site out..

I didnt buy new wheels I've had them.. I was just giving the background info so I could hopefully get a concrete answer. I guess I'll need to stick with 225's...

Have you seen the million people with stock wheels +245/40 + 25mm spacers? You'd be 5mm more aggressive. A fender roll would more than make up that amount.

Quick question, I am probably picking up some wheels/tires for cheap tonight but am not 100% sure they'll fit without rubbing.

19x9.5 ET +22
Sumitomo 235-35-19 F
Sumitomo 245-40-19 R

I guess he had to run them different to fit but I don't think he rolled. Will this fit on my 8 lowered on Tein H's?

The wheels fit perfect btw, going to get some paint (Bright Gold) on them Friday and will get you guys some pics.

Perfect is subjective. I would say it looks like shit. I feel comfortable assuming that.

I bet you're fun at parties.

Yea I definitely tell it like it is and can do magic tricks.

19 x 9,5 et45
Tyre size can not be determined right now. I can still choose the size :)

So my question......will it fit without modification and with what size of tires will they fit?

Sorry I don't post a lot, lots of lurking, Do all my main nonsense in customfighters.com forum so with that being said here goes nothing.

06 auto. Xxr521's. 18x8 fronts and 18x10 rears, rears with 235/50r18's bf Goodrich g-force tires.. Here's my issue. I knew right away I was going to have to roll my fenders, but I tried to get away with not rolling them and fails. Rolled th fenders and they still hit the inner fender joint where it seems the fender and rear bumper mount together. Tire shops tell me they can't squeeze a smaller tire on the rear wheels so I'm at a loss here. What do the tire and fitment guru's know that can remedy this aggravating situation? All help, hints, tips, and noob jabs are welcome! And will post pics of install once I get a laptop in front of me.

50 series are too big...first problem...40 would be better or 35

What are the offsets?

With a 10" wheel need around a +40 offset

I believe the offset is +25mm

50 series is where my problem is, thank you! I lack a serious knowledge of tires and sizes. Which is my own fault. How much smaller is a 35 series?

magic "tricks"
:yelrotflm

Got a call about the tyres. going to be running
19x9.5j et45 with 235/35/19 tyres
will it fit? I got 25 mm spacers all round..

http://www.gemplers.com/tech/tires-measure.htm

You are measuring wrong

yeah, they don't mount from edge to edge.

Thank you

Mazda 6 Wheels
 

Does anyone know if Mazda 6 wheels will fit on our cars?

I know they are slightly heavier (23 to 21 lb) and are 18x7 instead of 18x8. Would the difference in width produce noticeable results?

OEM 18" wheels
Wheels: Mazda OEM 18x7+55mm 5x114.3 23.5lbs

They are coming off a 2012 Mazda 6 GT.

They fit, and yes they will produce noticeable results (negative results that is).

They will work if you are looking for a winter wheel with a matching narrower tire.

yeah I used 17" Mazda 6 wheels as my winter wheels.

I might have to swap the wheels and tires on both of my cars...lol

Lol yeah my brother put my stockers on his mz6 and it looks really good.

My rx8 wheels will look good on my Mazda 6i, but on the other hand, my Mazda 6i wheels will look weird on my rx8...lol