|
That's not very similar. Not even close. Please try to understand that.
|
Originally Posted by R3AP3R
(Post 4505830)
By the way guys thanks for the info! I got my setup that fits now. The set is as I said before, 18x8.5 fronts and 18x10 rears. 235/40's on the fronts and the problems I had with the rears which I had 235/50's. the 50's were way to big and were getting destroyed by my fender/bumper mounting joint. I asked for sizes recommendations here and got some good ideas. I tried the 235/40's but it was impossible to get the bead to seat on the rim, tires were just too low of a profile to stretch onto the rim and lacked the necessary width.. Got a 245/40 and tried it, was a stretch but did get them to fit. Looks fantastic too. So set up now consists of fronts: 18x8.5-235/40 and rear: 18x10-245/40's for reference for anyone on here needing the info.
|
Originally Posted by Danmn858
(Post 4505867)
you should slap whoever mounts your tires, those are baby stretches. |
Lol ok I'll make sure to slap him next time I'm in. Who or where do you recommend for the extreme stretching? They had 5 or 6 different tire techs attempt to get the 235/40's on the 18x10 and they all failed. I was tired of them wasting my time so I asked if they could fit the 245's instead. Reluctantly they did so. I'm In the stl area, so next time I need tires I would like to get as extreme as I can so recommendations are needed.
And I will be sure to post up some pics |
Thats not an extreme stretch by ANY means. Go to a place that's works on custom cars etc. No where like discount tire or firestone, pretty much no where corporate where kids will be mounting your stuff.
|
3 Attachment(s)
Ok, Ill make sure next time I need tires to go that route. Pics are attached. The edited pic is when the 235/50's were mounted. You can see the size difference in comparison to the other pics.
|
Just for reference the Firestone on Tesson mounted my 245/40s on a 9.75 without any issue.
|
Didn't end up going with that set. Picked up a set of Rays MS01-LM with specs;
18x8 +38, 235/40/18 18x9 +38, 265/35/18 Fitment is excellent. Rubbing on a plastic panel sticking out in the fender. If the tire size was 255, I'd probably be able to tuck the tire. I'll take some pics soon. |
Thank you for not buying fake wheels.
|
18x9.5 +20mm 245/40/18. will this fit without problem?
|
are you lowered?
|
stock suspension but getting coilover after the wheels.
|
Suspension before wheels. Saying you are getting coilovers doesn't help either. Need some idea of ride height. Go super low and roll the fenders (for sure necessary) + trim bumper tabs(may be necessary).
|
Originally Posted by Locker_09
(Post 4507999)
18x9.5 +20mm 245/40/18. will this fit without problem?
|
I want to run this set up 255/35/18 offset et30. I am on 2 inch lowering springs. Can I do it? I need to know ASAP :)
|
Missing important information. Check the information in my signature
|
Originally Posted by Bojan17
(Post 4510721)
I want to run this set up 255/35/18 offset et30. I am on 2 inch lowering springs. Can I do it? I need to know ASAP :)
How wide are the wheels? If they are 9" or less they should be OK...if they are 9.5 or wider you will likely have to roll the fenders. If they are 10+ they will need more than a simple roll.... |
Originally Posted by dannobre
(Post 4510749)
How wide are the wheels? If they are 9" or less they should be OK...if they are 9.5 or wider you will likely have to roll the fenders.
If they are 10+ they will need more than a simple roll.... |
18x8.5 +40 on 245/40/18
Will I be able to run 25mm spacers on this setup? Or will it poke out too much? I dont mind rolling my fenders or cutting the tabs. Just wondering if it'll poke out like a 4x4. |
18x10 +30 with 265/35/18
|
ok so I went with work kiwami 18x9.5 +38 all around. Im thinking 245/40 for it. also im going on a koni+stech or h tech setup. will i need any modification if i go with that suspension setup?
|
Originally Posted by Locker_09
(Post 4513883)
ok so I went with work kiwami 18x9.5 +38 all around. Im thinking 245/40 for it. also im going on a koni+stech or h tech setup. will i need any modification if i go with that suspension setup?
|
i have 19x8.5 +40 rims up front. I put 255/40/19 tires up front and Im rubbing the inner wheel well plastic when I turn. I am lowered on Tein S-techs. Will dropping down to a 245/40/19 solve my issue?
Thanks |
245/35/19
|
Originally Posted by J8635621
(Post 4516422)
245/35/19
|
| All times are GMT -5. The time now is 04:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands