Originally Posted by Danmn858
(Post 4530995)
what size are the tires?
and you can just shave the bumper taps. |
Originally Posted by Danmn858
(Post 4531465)
Yes 18x10 will fit. If you you go with an offset from +20 to +30 you'll be fine depending on what size tire you choose. I would recommend a 235/40 or 245/40 depending on how low you are. You would need a fender roll though. If you want to run a lower offset its still totally doable. Even like 18x10 +10 if you run like a 225/40 or 235/40 with some increased camber.
EDIT: Also note that you could run a much higher offset like +40/45 if you want to have a meatier tire. |
Just shave it all off
|
I'm looking to run a 19x9 +20 front and 19x10.5 +25 rear. I just got ordered coil overs, and im going to roll and pull the fender. So whats the widest tire I can fit. I am aiming for a 265/30/19 front and 295/30/19 rear is that possible? I seen some run 19x10 +38 with a 285/30/19 on the rear with no modification to the fenders.
|
Originally Posted by reyes5937
(Post 4532268)
I'm looking to run a 19x9 +20 front and 19x10.5 +25 rear. I just got ordered coil overs, and im going to roll and pull the fender. So whats the widest tire I can fit. I am aiming for a 265/30/19 front and 295/30/19 rear is that possible? I seen some run 19x10 +38 with a 285/30/19 on the rear with no modification to the fenders.
|
will these fit? lowered on Megan coils, maxed out in the rear.
18x10 +25 all the way around with R 255/35 F 245/40 or 255/35 all the way around? fenders will need to be rolled and pulled or just rolled? or will these fit better with less work? 18x9.5 +35 with 265/40 all the way around? |
Will 18x10 +15 fit? My fenders are rolled but will I have to pull them? I'm lowered in the front and stock springs on the back
|
Originally Posted by toke_
(Post 4533756)
Will 18x10 +15 fit? My fenders are rolled but will I have to pull them? I'm lowered in the front and stock springs on the back
|
Originally Posted by J8635621
(Post 4533763)
Excuse me?
|
will these fit? lowered on Megan coils, maxed out in the rear.
18x10 +25 all the way around with R 255/35 F 245/40 or 255/35 all the way around? fenders will need to be rolled and pulled or just rolled? or will these fit better with less work? 18x9.5 +35 with 265/40 all the way around? |
Originally Posted by kescobar1991
(Post 4534077)
will these fit? lowered on Megan coils, maxed out in the rear.
18x10 +25 all the way around with R 255/35 F 245/40 or 255/35 all the way around? fenders will need to be rolled and pulled or just rolled? or will these fit better with less work? 18x9.5 +35 with 265/40 all the way around? you'll most likely have to shave your rear tabs too. |
Originally Posted by Danmn858
(Post 4534421)
The 10 +25 will fit fine since the megans dont go all that low in the rear. A fender roll all the way around will be required in either of your scenarios. And if you're doing the same size wheel all the way around do the same size tire. There is no point of doing staggered if the wheels are the same size. But for the 10's I would run a 245/40 all the way around if you plan to be "slammed"
you'll most likely have to shave your rear tabs too. |
Yeah it would. You could do it but you would have to run a lot more camber, which almost defeats the purpose.
|
buying new rims
I came across this website and fall in love with these rims and i was wondering if it fits on our rx8s and could i get them size 19" x 9.5 et40? is that wide enough? do i have to do some modification? would i need camber kits
here is the website |
Moved to Will It Fit thread.
They won't fit, wrong bolt pattern. We have 5x114.3 Unless that is a typo on their end, but then I wouldn't buy from a place that can't provide accurate information on the items they sell. |
Wheel specs would be fine except for the bolt pattern. I know a guy on the forum had miro wheels but not sure if his were special or he had them redrilled for the correct bolt pattern. You can also look at vmr wheels. They make theirs in 5x114.3 sometimes if you ask.
|
Originally Posted by RIWWP
(Post 4534672)
Moved to Will It Fit thread.
They won't fit, wrong bolt pattern. We have 5x114.3 Unless that is a typo on their end, but then I wouldn't buy from a place that can't provide accurate information on the items they sell.
Originally Posted by J8635621
(Post 4534680)
Wheel specs would be fine except for the bolt pattern. I know a guy on the forum had miro wheels but not sure if his were special or he had them redrilled for the correct bolt pattern. You can also look at vmr wheels. They make theirs in 5x114.3 sometimes if you ask.
|
No clue. That wheel should fit though
|
Originally Posted by J8635621
(Post 4534707)
No clue. That wheel should fit though
|
Your order is out of whack. Drop it before the alignment and it shouldn't need modifications to fit. You haven't said a tire size
|
Originally Posted by J8635621
(Post 4534720)
Your order is out of whack. Drop it before the alignment and it shouldn't need modifications to fit. You haven't said a tire size
|
Originally Posted by Luckyboii69
(Post 4534727)
19X9.5 5X114.3 +40MM 73.1 thats the tire size
|
Originally Posted by J8635621
(Post 4534730)
You need to do a lot more research
|
Lol everything. You don't even know what tire sizes look like
|
Originally Posted by J8635621
(Post 4534746)
Lol everything. You don't even know what tire sizes look like
|
All times are GMT -5. The time now is 04:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands