Philip.rx_8

Pls need to know if ill fit. 👍👍

Philip.rx_8

18x9 +30 all around
F 225/40/18
R 245/40/18
Lowerd on Tien
Will this fit on my 8.

Mr_Pieper

Why wouldn't you use the same size tires all around?

J8635621

iTrader: (10)

Probably the same reason he wouldn't look back 5 posts for an answer.......poor education system

Mr_Pieper

Hey, I'm teaching them well.

Philip.rx_8

So if I use 245/40/18 all around it wouldn't be robbing ryt?

alterg7

is 18x9.5 +38 with 265/35 all the way around a good choice in size and im lowered on tein flex coilovers

J8635621

iTrader: (10)

Good for what? You guys need to learn how to ask questions to get the answer you are looking for.

alterg7

its my daily driver so i want to up grade from stock rims and tires, would this be a good choice for all around performance and like i said ill have tein coilovers so itll be lowered atleast 2 inchs, or is their maybe a better choice. thanks

alterg7

will i have to roll the fenders ?

J8635621

iTrader: (10)

It was just a few posts back where I posted a link to a thread with the answer. No need for 265s on an 8 for daily driving. 245s are as wide as you need.

alterg7

is their a disadvantage from using a 265 tire ? so you think 245/35 would be best for 18x9.5 rim
and i read that link it did say 245s are best but if you are lowered a bit 265/35 are good too

J8635621

iTrader: (10)

245/40! 40 not 35. 265 can look good when lowered a lot. It's not necessary unless you have boost or drive in small tight courses like autox.

With a 9.5 the 245 is a bit stretched IMO. I'd do 9"

ableobject

That was before I got my coil overs. It's Much better now

Philip.rx_8

Any body running a 18x9+30 here?
Can any body post a pic thank u

N0P1st0ns

Will 225/40/18 fit on 18x9.5 +45? will they be boxy or square looking?

200.mph

iTrader: (9)

i think your tires will looked streatched

MEboy

iTrader: (1)

225 is the stock 18x8 tire and they are stretched there. I now have 235 on the stock wheels and they are square, I wish I had 245s but the 235s were significantly cheaper. That should give you a reference point.

N0P1st0ns

how stretched? like crazy hellaflush stretched? or just a little. I'm not going for that look, but i don't necessarily want boxy looking ones either. i think this looks good

MEboy

iTrader: (1)

Like this guy is stupid stretched lol. If you want a little stretch, try 245 or 255. My next wheel setup will be 18x9.5 or or 17x10 Enkei RPF1s depending on what I can fit, probably with 285s. Look up a fitment guide on the internet to see what will fit best.

Mr_Pieper

You would need to be at more of a +15 rather than a +45 to have the wheel out there. Just get a bigger tire size and stop being cheap.(This goes for everyone with a question.)

N0P1st0ns

im not being cheap.. i dont want them super wide buddy. getting +15 will make them stick out like 2 inches and thats way to much. i have 25mm spacers on my stocks and its perfectly flush. i want flushness with a little stretch. i plan on getting RPF1's 18x9.5 +45 thats already set. now im just figuring out my tires. The +45 will have me sticking out just a tad. and with some stretch it will be perfect when i decide to lower it. so you recommend 245/40/18?

curly_drift08

What would be the best tire size for a 18x9 +30 offset, lowered on Tein basis? I thinking about 235/40 R18 should be alright but I would rather ask here before I make any purchases.

Danmn858

iTrader: (10)

That should be alright. Minimal stretch. Will look nice. You could even go to a 245/40 if you want.

Mr_Pieper

The pic you gave is something like a +15 with a 235. A good size with the +45 would be more like 255/40. I know someone with RPF1s in that sizing and it works well. You will be a few mm in from where the spaced stock wheel was but with more tire.