Will It Fit Thread
02-24-2009, 11:44 AM
#1776
stock height - wheels will fit fine - you can run 275's if you wanted to
lowered a little bit will be a bit tricky - depending on your drop 265/35's would be a safe bet for the rears and you might have to stretch the tire for the fronts - it really depends on your drop.
lowered a little bit will be a bit tricky - depending on your drop 265/35's would be a safe bet for the rears and you might have to stretch the tire for the fronts - it really depends on your drop.
02-24-2009, 11:51 AM
#1778
yikes - yeah - i've seen 18x10's dumped on 265's and fit w/a little roll in the rear - but i'm not sure how the front will work out tho - 10's will be popping out a little from the fender so i'm not the exact profile that youl could go with to make it work. Maybe 265/35's w/some camber.
02-24-2009, 08:43 PM
#1780
See Jello? Say HELLO!
Join Date: Feb 2004
Location: London, ON
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Let me start by saying thank you for this thread!
My question is for an Advan RZ 19x9 rim. My offset choices are +35, +38, +45. I want to be as flush with the fender as I can in the front and the back but do not want to go staggered. Is this possible to obtain? From reading the first ~20 pages of the thread my primary choice is +35 but will I encounter problems? Will a +38 be tucked in?
My planned suspension is Tein S-Tech.
I don't have a tire size in mind so if I could get some width suggestions that would be very helpful. My obvious concerns are rubbing when turning the wheel at the front and hitting the fenders. Rolling the fenders is not an option for me.
Will it work? Thank you!
My question is for an Advan RZ 19x9 rim. My offset choices are +35, +38, +45. I want to be as flush with the fender as I can in the front and the back but do not want to go staggered. Is this possible to obtain? From reading the first ~20 pages of the thread my primary choice is +35 but will I encounter problems? Will a +38 be tucked in?
My planned suspension is Tein S-Tech.
I don't have a tire size in mind so if I could get some width suggestions that would be very helpful. My obvious concerns are rubbing when turning the wheel at the front and hitting the fenders. Rolling the fenders is not an option for me.
Will it work? Thank you!
02-24-2009, 08:47 PM
#1782
I have 19X8.5 with a +38 and they are not quite flush in the front.... an extra 1/2 inch would be really flush. So a +38 would be a good conservative choise and allow you to run more tire (like 255) - but either the 35 or 38 will fit in the back and likely not rub with a 255 tire.
That is basically the S-Tech height. You can see how my fronts are not quite flush.
That is basically the S-Tech height. You can see how my fronts are not quite flush.
02-24-2009, 08:54 PM
#1783
Illmatic: you have good taste - 19x9 +35 should be very close to flush. May need a slight roll if anything only to avoid the fender being grabbed by the tires on rough roads. Aside from that, you shouldn't run into any problems fitting those sexy *** wheels 
02-24-2009, 09:21 PM
#1785
See Jello? Say HELLO!
Join Date: Feb 2004
Location: London, ON
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Thank you for the quick and detailed responses. 255, wow! I didn't know I could go that wide. Is there a tire width at which point the dynamic of the car becomes different? Or is that only with staggered setups?
02-24-2009, 09:52 PM
#1788
Administrator
iTrader: (7)
swoope got side skirts?! pics or it never happened
02-25-2009, 08:57 PM
#1790
Registered User
Join Date: Feb 2009
Location: manchester,uk
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
option1: F: 8*18 +34 235/40/18
R: 9*18 +42 265/35/18
2: F:8.5*18 +35 235/40/18
R:9.5*18 +35 265/35/18
which will look better and do i need to do any rolls to fit either of those sets?
stock height now but thinking to drop the car with HKS S_teck
thanks
R: 9*18 +42 265/35/18
2: F:8.5*18 +35 235/40/18
R:9.5*18 +35 265/35/18
which will look better and do i need to do any rolls to fit either of those sets?
stock height now but thinking to drop the car with HKS S_teck
thanks
02-25-2009, 09:12 PM
#1791
02-26-2009, 10:12 AM
#1794
Registered User
Join Date: Apr 2008
Location: Knoxville, TN
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
about to get some tires (today, actually)
if you had the choice between a 255/40 and a 245/45 on a 17x10 wheel, which would it be?
not daily driven, only for autox and the dragon.
if you had the choice between a 255/40 and a 245/45 on a 17x10 wheel, which would it be?
not daily driven, only for autox and the dragon.
02-26-2009, 06:07 PM
#1798
Registered User
Join Date: Jun 2007
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, this is the setup i have planned to run.
F: 19x8 +25 // 235/35/19
R: 19x10 +45 // 275/30/19
I'm going to have the front and rear fenders rolled and am hoping to get as flush with the fenders as possible. The car will be lowered on coils with no finger gap on the drop.
what do you guys think?
F: 19x8 +25 // 235/35/19
R: 19x10 +45 // 275/30/19
I'm going to have the front and rear fenders rolled and am hoping to get as flush with the fenders as possible. The car will be lowered on coils with no finger gap on the drop.
what do you guys think?
02-26-2009, 06:11 PM
#1799
Administrator
iTrader: (7)
19x8 +25 and lowered???
That's gonna REALLY tight. Buddy of mine has 19x8.5 +30 and there's some rubbing.
That's gonna REALLY tight. Buddy of mine has 19x8.5 +30 and there's some rubbing.