I will be getting new tires so I guess I'll look into that size. Will there be any issues with either of those sizes on the offsets I mentioned?
|
Not even close. You will be perfectly fine.
|
Has anyone considered making a master list using all of the info in the thread? Maybe a table showing wheel sizes, tire sizes, offsets, and idea of what the fitment will be like.
With 80 pages of useful info I'm sure that there are lots of repeat questions. |
Originally Posted by bee_afraid
(Post 2930015)
Has anyone considered making a master list using all of the info in the thread? Maybe a table showing wheel sizes, tire sizes, offsets, and idea of what the fitment will be like.
With 80 pages of useful info I'm sure that there are lots of repeat questions. LOL but seriously that is a really good idea. |
^It's a good idea, but would be really hard. Theres alot of different variables to consider such as, ride height, spring rates, different tires are sometimes made a little wider, or narrower...etc.
|
There could at least be a list of obvious stuff though lol. aka will 18 x 8 + 48 work with 225/45/18? or will 19 x 10.5 + 15 work with 295/35/19 slammed? I'm not sure it would help most of the people that ask those questions though.
|
will this fit with s-tech lowering? front 20x8.5 wrapped in 245-35-20 rear 20x9.5 wrapped in 275-30-20.
|
Originally Posted by Sovesky
(Post 2930516)
will this fit with s-tech lowering? front 20x8.5 wrapped in 245-35-20 rear 20x9.5 wrapped in 275-30-20.
|
Originally Posted by imput1234
(Post 2930553)
What offset
|
Wondering if these 18" x 7.5 Konig Troubles will fit on my 2004 RX8 GT
5 Bolt on 114.3 |
http://i288.photobucket.com/albums/l...100_1640-2.jpg
Hey guys... you helped last time... now I need to get a set of springs...... I can pick up a set of mazdaspeed springs, if not, I am considering a set of tein s-techs (cause they are extremely common), tanabe nf (cause they are almost at oem spring rates), problem is i have these 19" wheels and the back are kind of wide... which ones would be the best ride (not too harsh, would prefer something like oem, maybe a tad stiffer) without rubbing or causing trouble with the wheels also, would i need an expensive camber kit properly align the wheels after to drop? (after dropping my Civic before, i was running through tires because the camber was pretty bad) I am enjoying even tread on my tires since the car hasn't been lowered.... Wheel and tire Config: f: 19x8.5 w/ 36 offset 225/35/19 r: 19x9.5 w/ 42 offset 245/35/19 |
IMO, MS Springs. Clean drop w/some space.
That is unless you wanna be dumped right onto the wheel. Then perhaps the s-techs might work by pulling the inside. |
1 Attachment(s)
Originally Posted by bee_afraid
(Post 2930015)
Has anyone considered making a master list using all of the info in the thread? Maybe a table showing wheel sizes, tire sizes, offsets, and idea of what the fitment will be like.
With 80 pages of useful info I'm sure that there are lots of repeat questions. Seriously, that would be a great idea, but to filter out all that info would be real tedious... maybe just start a new thread with the attached spreadsheet. |
Originally Posted by vtfanatic69
(Post 2929595)
I'm looking to run an 18x8.5 with either a 35+ or 38+ offset. Would it fit and look right to use 225/45R18 tires with this or is there a better size? I'm torn between matte black fn01r-c's and black super hiros. they are both the same price and idk which to get. I haven't been able to find any RX-8's with super hiros so idk if they would look good or not.
Also one more question. Anyone know if the Super Hiros take TPMS? Thanks |
will 17x9 off set 35 fit our 8?
|
Yea
|
Thanks grammar cop, lol
by the way, you like that cartoon of your icon?? I love it ^^ I was think about getting these rims for track days...coz they are cheap and 17x9 35offset for only $450 a set http://losangeles.craigslist.org/lac...089924164.html |
^those wheels are heavy as hell!
|
^+1
not practical for track. Looks nice, but the weight is kinda bleh :icon_no2: Hey Philip, hit me up at the meet, i know a guy that might be able to you hook you up if you still want a set... |
Will 19X8.5 with 255/35/19 +38 fit w/ stech lowering? or should i get a smaller tire in front?
|
It'll fit. I've got 19x9.5, +35, with that size tire... but I had to roll my fenders.
|
Originally Posted by Sovesky
(Post 2934201)
Will 19X8.5 with 255/35/19 +38 fit w/ stech lowering? or should i get a smaller tire in front?
|
So i just picked up a set of rpf1s 17x10 +38. Going to be getting tires soon, and just wanted to know what setup would be best.
would 255/40/17 direzza star spec work? or just go with ecsta xs 275/40/17? would be using them on track too. Thanks |
i have 18x8.5 wheels with 245/40 tires lowered on eibach springs (1.2 inches)..will 12.7mm (.5 inch) spacers rub in the front or rear? OR will 25.4mm (1 inch) spacers rub in the front or rear? thanks
|
I've been meaning to ask, what's the widest tire that can fit oem 18" wheels? Just curious
|
All times are GMT -5. The time now is 04:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands