Will It Fit Thread
#2106
Yea, I've heard of that setup, running in STX and maximum legal wheel width is 9 inches and maximum tire width is 265. So I can run 18x9 +45 without any problems? Fender roll required?
#2110
#2114
ok. BBS RX 17 x 9 +28mm w/a 70.3 centerbore, stock suspension for now. How can I make these fit, what do I need and where can I get it? Also, about what size tires can I get away with?
#2116
#2119
There's a bunch in this thread. https://www.rx8club.com/showthread.p...&highlight=stx
I ended up going with 17X9, since we're stuck with a 9" rim for STX you don't loose that much dropping down to a 255 from the 265. In my opinion the lighter weight, cheaper wheels, cheaper tires, lower center of gravity, and shorter gearing all out weight the slight lose of tire width.
I ended up going with 17X9, since we're stuck with a 9" rim for STX you don't loose that much dropping down to a 255 from the 265. In my opinion the lighter weight, cheaper wheels, cheaper tires, lower center of gravity, and shorter gearing all out weight the slight lose of tire width.
#2120
Please dont mind my annoying questions...i think im annoyed of asking too ![Frown](https://www.rx8club.com/images/smilies/frown.gif)
would this size fit close to stock? only major difference is the offset..and i dont really get what off set is...
Size: 18"x8"
Bolt Pattern: 5x114.3 (5x4.5)
Offset: 35
also just confirming the bolt pattern?
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
would this size fit close to stock? only major difference is the offset..and i dont really get what off set is...
Size: 18"x8"
Bolt Pattern: 5x114.3 (5x4.5)
Offset: 35
also just confirming the bolt pattern?
#2121
I ♥ Drifting!!!
iTrader: (6)
Please dont mind my annoying questions...i think im annoyed of asking too ![Frown](https://www.rx8club.com/images/smilies/frown.gif)
would this size fit close to stock? only major difference is the offset..and i dont really get what off set is...
Size: 18"x8"
Bolt Pattern: 5x114.3 (5x4.5)
Offset: 35
also just confirming the bolt pattern?
![Frown](https://www.rx8club.com/images/smilies/frown.gif)
would this size fit close to stock? only major difference is the offset..and i dont really get what off set is...
Size: 18"x8"
Bolt Pattern: 5x114.3 (5x4.5)
Offset: 35
also just confirming the bolt pattern?
#2122
Registered User
Join Date: Oct 2008
Location: Denmark
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Heeey guys !
im thinking of buying some Volk racing rims for my 8 but im in a bit of doubt of wich tire size is ok for these and / or if they will fit.. hope you can help me ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
The rims are:
Front : 19x8,5 +35
Rears : 19x9,5 + 45
my 8 is lowered from the factory dunno how much that is.. but i know it's not much.. will those fit and what size of tires should i wrap them in for best fitment?![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
thanks up front..
Opane*
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
The rims are:
Front : 19x8,5 +35
Rears : 19x9,5 + 45
my 8 is lowered from the factory dunno how much that is.. but i know it's not much.. will those fit and what size of tires should i wrap them in for best fitment?
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
thanks up front..
Opane*
#2123
Super Low & Super Slow
iTrader: (1)
Since i just found out one of the wheels I've always liked now comes in an 18x10, I'm very curious to see if it could fit on the 8.
Specs are 18x10 with +35 offset. Now if all them boys can fit the 17x10 +25, why can't a 18x10 +35 fit with a little bit smaller tire.
If I end up not getting these and going with my other choice, it'll be the 18x10 +48s with a 5mm or 7mm spacer wrapped in 265/35s
Specs are 18x10 with +35 offset. Now if all them boys can fit the 17x10 +25, why can't a 18x10 +35 fit with a little bit smaller tire.
If I end up not getting these and going with my other choice, it'll be the 18x10 +48s with a 5mm or 7mm spacer wrapped in 265/35s