RX8Club.com

RX8Club.com (https://www.rx8club.com/)
-   Series I Wheels, Tires, Brakes & Suspension (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/)
-   -   Will It Fit Thread (https://www.rx8club.com/series-i-wheels-tires-brakes-suspension-55/will-fit-thread-133500/)

Motomouse 04-19-2009 02:59 PM

1 Attachment(s)
maybe now

Motomouse 04-19-2009 03:01 PM

1 Attachment(s)
one more

rapidfire 04-25-2009 08:59 PM

Please help guys!
 
What will be the most aggresive & yet safe wheel and tire setup without fender roll?

Criteria to be met:
I will like the new wheel to match the OEM calibrated speedometer speed.
I'm planning of getting a set for autox and a set for daily driving/show. But if I can get 1 set for both purposes, that would be even better.
I don't mind making a little camber adjustment.
I would like the setup to be as flush as possible to the fender.
I will have passenger in back seat most of the time,

Suspension & brake mod:
Car will be dropped about 1" with Tein Mono Flex coilover and possible big break kit(Project Mu, Endless, Brembo) in near future.

Here is what I have come up so far:
F:19x8.5 +42 or +40 (255/35)
R:19x9.5 +42 or +40 (255/35)

I also have full Mazdaspeed bodykit. I'm sorry guys, I know I'm asking alot here and I know I suppose to use the search and read through this thread but I'm confuse :banghead: with so many possible combination setup.

Any help and advice will be much appreciated.

RyanX-8 04-26-2009 11:38 AM

Thinking about buying some cheaper aftermarket wheels since my car is a DD. Looking into these. (Not sure) Will they fit?

ADR-90
INTERCREW

Width: 7.5J
Diameter: 18 inches
Number of Bolts: 5
Bolt Pattern: 5X100 5X114.3 (Is this because front and back are diff sizes?)
Offset: 48

Thanks alot!

Motomouse 04-26-2009 01:17 PM

5x114.3 all 4 corners !

RyanX-8 04-26-2009 01:43 PM

What about these?

Width: 7.5J
Bolt Pattern: 5-114.3 (5x4.5")
Diameter: 18 inches
Offset: 45 P

TopGear8 04-26-2009 04:11 PM

^Yes they will fit fine, but I would not recommend getting wheels that are less than 8" wide...

RyanX-8 04-26-2009 04:27 PM


Originally Posted by topgear8 (Post 2989322)
^Yes they will fit fine, but I would not recommend getting wheels that are less than 8" wide...

Why is that?

What size tires would I buy for them?

TopGear8 04-26-2009 04:36 PM

^Because stock is 18x8", And anything under 8" wide just looks bad, won't have alot of grip, and even if it's a good looking wheel design, will be too sunken in and not be aggressive at all. You would probably put a 225 on a 7.5" wheel. But please try to get at least 8" wide. You will regret going with a 7.5".

RyanX-8 04-26-2009 04:39 PM

Thanks for the heads up I will have to do some more thinking.

TopGear8 04-26-2009 04:44 PM

^What wheel are you looking to get? Send me a PM I might be able to get it for you.

Mazda_RX804 04-26-2009 08:22 PM

Im looking for a nice, wide, stretch look. Any suggestions for rim widths, and tire size?
Either 18" or 19" and Im on stock height. And no modding the fenders.

Also anyone have pics with an RX8 with BBS LM's??

Thanks guys!

jae one 04-27-2009 03:07 AM

will 275/35/18 fit stock rim and suspension

ZumnRx8 04-27-2009 03:11 AM

maybe with some negative camber and rolled fenders. And thats only the back, the front, no way.

SiLVeRE8 04-27-2009 03:32 AM


Originally Posted by rapidfire (Post 2988680)
What will be the most aggresive & yet safe wheel and tire setup without fender roll?

Criteria to be met:
I will like the new wheel to match the OEM calibrated speedometer speed.
I'm planning of getting a set for autox and a set for daily driving/show. But if I can get 1 set for both purposes, that would be even better.
I don't mind making a little camber adjustment.
I would like the setup to be as flush as possible to the fender.
I will have passenger in back seat most of the time,

Suspension & brake mod:
Car will be dropped about 1" with Tein Mono Flex coilover and possible big break kit(Project Mu, Endless, Brembo) in near future.

Here is what I have come up so far:
F:19x8.5 +42 or +40 (255/35)
R:19x9.5 +42 or +40 (255/35)

I also have full Mazdaspeed bodykit. I'm sorry guys, I know I'm asking alot here and I know I suppose to use the search and read through this thread but I'm confuse :banghead: with so many possible combination setup.

Any help and advice will be much appreciated.

If you want your wheels to be as flush as the fender without rolling is not quite possible. But looks like +40 with 255 will be fine without any fender rolling and this set up will not get your wheels completely flush with the fenders. Also 255/35/19 shouldn't disrupt the speedo.

TopGear8 04-27-2009 11:22 AM


Originally Posted by jae one (Post 2990139)
will 275/35/18 fit stock rim and suspension

It will fit, but it will look terrible, The only people who I have seen do it are people who AutoX and throw some Ho Ho's on there. So for a stock size wheel I wouldnt recommend putting anything over a 245 on there.


Originally Posted by ZumnRx8 (Post 2990142)
maybe with some negative camber and rolled fenders. And thats only the back, the front, no way.

And what are you talking about? 275's easily fit in front and rear...

titus1011 04-27-2009 12:52 PM

Im putting on four 19x8 Momo V10s. I want a little bit bigger tire. Whats my best bet? Im looking for probably Falken, or if anyone has any recommendations it would be much appreciated. I want a great looking aggressive style tire, with a quite ride.

I have been told the Falken 275/30/19s wont fit. also the 245/30/19 wont fit either.. dont know if this is true?? Anyone know?

Atilla 04-27-2009 01:03 PM

245/30/19's will fit. Iono about quiet tires - I have loud ass KDW's :rock: - I have had Falken 452's and didn't hear too much, but then again people say i have deaf spells :rolleyes:

Question: if you're going with aftermarket rims - why not go wider? 8" is what the stock wheels are...

titus1011 04-27-2009 02:24 PM

thanks for the help,

I guess I just liked the MOMO V10s and thats the size they have..:)

J8635621 04-27-2009 02:26 PM

245/30 is pretty low profile and will throw the speedo off. 245/35 is a better size. My nitto invo are quiet but I don't know if they come in that size.

titus1011 04-27-2009 02:32 PM

hey thanks,

I appreciate all the help, as I am unfamiliar with tire sizes and fitments. What the difference between the 245/30 and the 245/35. how do you they compare?

Atilla 04-27-2009 02:38 PM

the sidewall.

SiLVeRE8 04-27-2009 03:29 PM

^ Just to add... 245/30 has a thinner sidewall than 245/35. 30 or 35 is the sidewall thickness and its actually calculated as the percentage of the width of the tire.

titus1011 04-27-2009 07:43 PM

what would be the biggest tire I could put on the 19x8 momos that would fit safely without messing with my speedometer?

imput1234 04-27-2009 07:43 PM


Originally Posted by titus1011 (Post 2991695)
what would be the biggest tire i could put on the 19x8 momos that would fit safely without messing with my speedometer?

245


All times are GMT -5. The time now is 12:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands