Atilla

iTrader: (1)

PF-racing - yes, with rolled fenders - depending on tire profile as well.

Rival: Yes, you'll fit fine.

PF-Racing

How wide can I go with the tires? Will 275/35 fit?

imput1234

iTrader: (6)

Yes

imput1234

iTrader: (6)

They will fit, no problems.

Atilla

iTrader: (1)

not a good idea to run staggered tires on the OEM wheels.

cjkim

soo i've got a question

I'm currently running:
18x8.5 +38 on 225/40, dropped with about 13.25 inches from center of wheel to ground (1.2-1.5ish drop, don't know what stock was)
Fitment is okay, however I'm starting to think about spacers.
I'm running a fair amount of camber (-1.3f, -1.8r) so it's not as flush as some of the other pictures of the same setup.

Any recommendations on the correct spacer setup without a need for a roll? I rarely carry more than one passenger, so rubbing with a full car is not an issue

I was thinking 10mm up front, 15mm or 20mm in the rear... comments?

and semi off topic question:
Here are my wheels:

I'm thinking a 10mm and 15mm spacer with its own studs normally wouldn't clear most rims (since the studs the spacers attach to might be too long without shaving)... however, i see a lot of 5zigens have 10 holes. are those extra 5 (obviously not for mounting) for spacer compatibility?

J8635621

iTrader: (10)

Just go to an offset calculator and try to copy 9.5 +34ish in the rear (if you have rolled fenders +38ish if not) and 8.5 +30ish (a 10 mm would be fine though) in the front. That should look better and fit fine.

cjkim

yeah, it's how i figured 10/15 or 20mm..
just wondering if anyone would chime in saying i can go even lower without a roll.

Ross_Dawg

iTrader: (2)

OK:

FN01R-C
17x10 +35 with 275/30/17

Will have:
-S-techs
-D-Specs (full stiff)

fenders have not been rolled yet

I know +25 has run into problems, but what about +35?

J8635621

iTrader: (10)

I'm guessing you said 275/30/17 on purpose instead of 275/40/17? I'm willing to bet you will have to roll the fenders but it will work out in the end. I'm pretty sure a couple people in the 5zigen thread ran that set up btw.

Ross_Dawg

iTrader: (2)

Thanks. I meant 275/40/17

TopGear8

iTrader: (3)

^You gonna go with the bronze one, or the redline's? Send me a PM I'll get them to you for a good price.

imput1234

iTrader: (6)

No one is running 275's on those yet.

Ross_Dawg

iTrader: (2)

Huh... guess it's 17x9's

tiltmode43

iTrader: (15)

Yay, I haz no rub

speedy-8-ball

will these fit on my stock 8? its not lowered. maybe with some low pro tires?
http://cgi.ebay.com/ebaymotors/19-AD...Q5fAccessories

Atilla

iTrader: (1)

at stock height you'll be ok. Once you're lowered you will need a lot of work.

speedy-8-ball

i knew a friend that put some rims on his car which were fine.. but only when he was in it alone.. would that probably be the same case for me? i have sport suspension and it is pretty stiff though..

dannobre

iTrader: (3)

You need at least a +35 offset for a 9.5" wheel....+38-40 would be better

tiltmode43

iTrader: (15)

Atilla

iTrader: (1)

^Unless you're this guy - in which case, you'll still need some work to make sure they fit that well

rapidfire

I'm doing a final check on the offset before I put in my order, I'm more concern on the offset for the rear without rolling when car is loading with passengers and audio equipments. Originally I have picked +42 for the rear but I'm having 2nd thought. I think front is ok and it is the lowest offset they have.

For the tire, is 255/35/19 too wide for the front? I don't want any heavy feeling during turn or make the steering feel heavier.

F - 19x8.5 +35 (255/35/19)
R - 19x9.5 +35 or +42 or +45 (255/35/19)

Atilla

iTrader: (1)

IMO - stick with 245's for the front.

the rears are fine at +35 w/255 tires.