Notices

received rotor shaped fog lamp for R3

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 02-17-2010 | 11:33 AM
  #26  
fray's Avatar
Registered
iTrader: (1)
 
Joined: Mar 2005
Posts: 397
Likes: 0
From: New Prague, MN
From the research I did, most of the west coast states have specific DMV rules as to when a rear-fog light is allowed to be illuminated. Many of them it's in the 500 feet or less visibility range.

Midwest states like where I am from tend to not have any specific laws about rear fog lights. They are legal, but there is nothing to indicate when it's allowed to be illuminated (or not.) Here in MN they have an "excessive lighting" statute. A few officer friends mentioned they could write a ticket to someone with a rear fog turned on based on that rule, however they were unlikely to unless the light was visually impacting someone following them.

Due to the brightness of the rear fog, I'd certainly consider it to be distracting if I was following an RX8 at night, that wasn't in either heavy rain or heavy fog.

(Note, turning that light on in fog or rain conditions really causes the drivers behind to back off.. So I'm certainly an advocate for having it.. but using it responsibly is the key!)
Old 02-18-2010 | 03:31 AM
  #27  
RX8pwnage's Avatar
Thread Starter
RX8. Yeah, I get it.
iTrader: (1)
 
Joined: May 2009
Posts: 454
Likes: 0
From: West Lafayette, IN
Originally Posted by lzhmax
Anyone knows the bulb code for it??
the oem fog is a 7440 bulb. I bought a 7440 LED so it wont burn so bright hopefully
Old 02-18-2010 | 07:32 PM
  #28  
lzhmax's Avatar
Rotryyyyyy
 
Joined: Nov 2009
Posts: 111
Likes: 0
From: Adelaide, AUS
Thanx, just keep posting your result
Old 02-19-2010 | 12:46 AM
  #29  
steve2tails's Avatar
Registered
 
Joined: Sep 2008
Posts: 48
Likes: 0
How good is japanparts.com shipping. I was reading there shiping methods but it confusing. I've been wanting to order things from them just wasnt sure about the shipping. Any info would be appreciated.
Old 02-19-2010 | 07:20 AM
  #30  
RX8pwnage's Avatar
Thread Starter
RX8. Yeah, I get it.
iTrader: (1)
 
Joined: May 2009
Posts: 454
Likes: 0
From: West Lafayette, IN
It's fast...get in contact w yuki by email or use their website...if website choose "shipping to door" unless part is too big which will require u pick up at airport.
Old 03-03-2010 | 12:00 PM
  #31  
Faria's Avatar
LikeThunda
 
Joined: Dec 2009
Posts: 66
Likes: 0
From: South bay =D
Looks Kooool
Old 03-09-2010 | 07:17 PM
  #32  
RX8pwnage's Avatar
Thread Starter
RX8. Yeah, I get it.
iTrader: (1)
 
Joined: May 2009
Posts: 454
Likes: 0
From: West Lafayette, IN
Well, here it is. Its wired straight to the tailights, so its on when the tails are on. Swapped out stock bulb for a 9 LED bulb...poor quality cell phone pic

Name:  IMAG0024.jpg
Views: 96
Size:  24.2 KB
Old 05-19-2010 | 04:57 PM
  #33  
Leejin's Avatar
Registered
 
Joined: Aug 2009
Posts: 52
Likes: 0
Originally Posted by RX8pwnage
Well, here it is. Its wired straight to the tailights, so its on when the tails are on. Swapped out stock bulb for a 9 LED bulb...poor quality cell phone pic


Where'd you get the LED Tail Lights? Or are those the stock 2009 tails? I've been looking for these forever.

Thanks in advance.
Old 05-19-2010 | 06:35 PM
  #34  
RX8pwnage's Avatar
Thread Starter
RX8. Yeah, I get it.
iTrader: (1)
 
Joined: May 2009
Posts: 454
Likes: 0
From: West Lafayette, IN
^ yeah, those are the 09 stock tails
Old 05-23-2010 | 04:13 PM
  #35  
paulmasoner's Avatar
Asshole for hire
iTrader: (1)
 
Joined: Jun 2006
Posts: 3,214
Likes: 3
From: Colfontaine, Belgium
holy cow, i needed one of these when i moved to europe and i grabbed one off Ebay in perfect condition for $50.... i saw $300 mentioned on the first page!!!
Old 05-23-2010 | 06:19 PM
  #36  
kenpo1441's Avatar
Registered User
iTrader: (1)
 
Joined: Apr 2008
Posts: 85
Likes: 0
From: Indianapolis
Was that for a series 1? Because the series II need a body colored panel which drives up the price.
Old 05-23-2010 | 06:30 PM
  #37  
paulmasoner's Avatar
Asshole for hire
iTrader: (1)
 
Joined: Jun 2006
Posts: 3,214
Likes: 3
From: Colfontaine, Belgium
yes S1. but i had looked and the S1 OEM's were about $350 too....
Old 05-24-2010 | 04:32 AM
  #38  
bse50's Avatar
#50
 
Joined: Nov 2007
Posts: 7,521
Likes: 11
From: Caput Mundi
Originally Posted by paulmasoner
holy cow, i needed one of these when i moved to europe and i grabbed one off Ebay in perfect condition for $50.... i saw $300 mentioned on the first page!!!
Yes..? What shall I do for you?
Old 05-26-2010 | 03:10 PM
  #39  
paulmasoner's Avatar
Asshole for hire
iTrader: (1)
 
Joined: Jun 2006
Posts: 3,214
Likes: 3
From: Colfontaine, Belgium
^^ thats how I'm gonna laugh when i beat your *** at some video games whenever you come up here
Old 05-26-2010 | 03:16 PM
  #40  
bse50's Avatar
#50
 
Joined: Nov 2007
Posts: 7,521
Likes: 11
From: Caput Mundi
Thou shall not call the Holy Cow in vain!
Wat videogames? :p
Old 01-20-2011 | 03:35 PM
  #41  
RogueTadhg's Avatar
Living is best Modified.
 
Joined: Jul 2007
Posts: 479
Likes: 0
From: South Carolina
It's funny, I usually have to check my brakes right when I can see the guy behind me pick his nose, or the woman texting (Tail gating & texting. really.)

I'd like to switch it up to just give tailgaters a second look.
Old 01-20-2011 | 04:14 PM
  #42  
jrx13's Avatar
Registered
 
Joined: Sep 2004
Posts: 590
Likes: 2
Originally Posted by RogueTadhg
It's funny, I usually have to check my brakes right when I can see the guy behind me pick his nose, or the woman texting (Tail gating & texting. really.)

I'd like to switch it up to just give tailgaters a second look.
I did mine around Christmas. I was going to make a writeup with pics. Hopefully soon. I used most of the wiring from the JDM kit but you have to mod some of it.
Old 01-22-2011 | 12:58 AM
  #43  
JeRKy 8 Owner's Avatar
Stuck in a love triangle
 
Joined: Aug 2003
Posts: 2,201
Likes: 3
From: Miami, FL
I am thinking of turning mine into a brakelight and replacing the



I have down there and with a standard license plate one cause the field of vision is too low


Last edited by JeRKy 8 Owner; 01-22-2011 at 01:02 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vapor2
West For Sale/Wanted
7
05-04-2020 04:53 AM
RXFEVER
RX-8 Parts For Sale/Wanted
38
08-29-2018 11:14 AM
RXFEVER
West For Sale/Wanted
17
09-11-2016 03:51 PM
coolcars44
RX-8 Parts For Sale/Wanted
3
09-24-2015 06:47 PM
vapor2
NW RX-8 Forum
1
09-17-2015 08:43 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: received rotor shaped fog lamp for R3



All times are GMT -5. The time now is 11:38 AM.