RX-8 Submissions for SevenStockXII Premium Parking Spaces!
#1
RX-8 Submissions for SevenStockXII Premium Parking Spaces!
*** Submissions will need to be in by Sept 15th***
*** YOU MUST BE ATTENDING SEVENSTOCK12 WITH THIS VEHICLE***
(obviously, but I just gotta remind you folks just in case!)
Please post pictures and some information on your car, so the forum can vote!
Please limit your postings to just 1 post in here to keep it nice and tidy.
Otherwise I'm going to send DrKillJoy after you!
*** YOU MUST BE ATTENDING SEVENSTOCK12 WITH THIS VEHICLE***
(obviously, but I just gotta remind you folks just in case!)
Please post pictures and some information on your car, so the forum can vote!
Please limit your postings to just 1 post in here to keep it nice and tidy.
Otherwise I'm going to send DrKillJoy after you!
#2
#3
kool hopefully i can get a spot! but i know theres plenty of clean rx8's
2007 rx8
greddy turbo kit
bnr upgraded garrett 60-1 turbo
mazsport cai
mazsport midpipe
greddy type rs bov
greddy evo tt exhaust
19x9x5 5 zigen sc300 rims all around
apexi n1 coilovers
pictures aren't the best...list of mods:
plenty more mods..
2007 rx8
greddy turbo kit
bnr upgraded garrett 60-1 turbo
mazsport cai
mazsport midpipe
greddy type rs bov
greddy evo tt exhaust
19x9x5 5 zigen sc300 rims all around
apexi n1 coilovers
pictures aren't the best...list of mods:
plenty more mods..
Last edited by gregs; 08-29-2009 at 09:50 AM.
#4
2007 VR , and the pic is in my signature.
listing only visuals:
exterior:
-pinstripe
-trimmed rear bumper
-fujitsubo legalis R catback
-alum mesh front opening screens
-vent accent on hood
-5 glass tint and 3rd brake light
suspension:
-RB springs
-progress bars on RB ft.endlink & custom rears
-17x9.5 enkei rpf1 on azenis
-mazdatrix lines
-BR ext lugs (thanks baldy for the donation)
under the bay:
-gutted hood
-dark metallic painted covers to compliment grey insulation
-blue pulleys
-magnecor vvires
-heat vvrapping
-'09 R3 4pt stb (modified to fit)
-hood vent accent
-bling bling rotary13b1 oil cap
interior:
-RB gauge kit
-razo ****
-stri-pro mini shift light
this should be enough. still appears stock...but doesn't hurt to try for a nice spot!
listing only visuals:
exterior:
-pinstripe
-trimmed rear bumper
-fujitsubo legalis R catback
-alum mesh front opening screens
-vent accent on hood
-5 glass tint and 3rd brake light
suspension:
-RB springs
-progress bars on RB ft.endlink & custom rears
-17x9.5 enkei rpf1 on azenis
-mazdatrix lines
-BR ext lugs (thanks baldy for the donation)
under the bay:
-gutted hood
-dark metallic painted covers to compliment grey insulation
-blue pulleys
-magnecor vvires
-heat vvrapping
-'09 R3 4pt stb (modified to fit)
-hood vent accent
-bling bling rotary13b1 oil cap
interior:
-RB gauge kit
-razo ****
-stri-pro mini shift light
this should be enough. still appears stock...but doesn't hurt to try for a nice spot!
Last edited by TrochoidMagic; 08-29-2009 at 06:35 PM.
#6
Count me on Please
I'm gonna sell my 8 after this seven stock event
Is gonna be my last show ><
Here are some pics and infos
---------------------------------------------
2004 Mazda RX-8 Lighting Yellow
Exterior:
Mazdaspeed side skirt
Mazdaspeed Spoiler
Mazda OEM F&R Aero Kit
Seibon Carbon Fiber Hood
8000K HID headlight
3000K HID fog light
JDM white side markers
Polished Aluminum?Fender Strakes
Aluminum - Front&Rear ROTARY ACCENT
Mazdaspeed F&R license plates
Engine/ Power mod:
SR Motorsports complete pulley kit
Mazdaspeed Cold Air Intake
Borla cat back exhaust system
Custom on/off fan control
15W50 MOTUL racing oil
Mazdaspeed oil cap
Greddy radiator cap
Wheels/Tires/Breaks
4xEnkei RP-F1 18x8.0
4x 235 40 18 Federal 595RS-R
Porterfield Front Racing brake pads (Track Use)
EBC Front bake pads (Yellow)(street use)
EBC Rear brake pads (Red)
EBC F&R Brake Rotors
Stoptech Stainless Brake lines
MOTUL DOT 4 racing brake oil
Suspension
4x Megan Coilovers
Mazdaspeed Front carbon fiber strut bar
Mazdaspeed Rear strut bar
Tanabe Front Sway bar 30.4mm
Tanabe Rear Sway bar 20.4mm
4 pieces under car brace
Interior:
Sparco Spirit bucket seat
Custom low position bracket
All LED light bulbs
Aluminum PEDALS
Mazdaspeed Shift ****
--------------------------------------------
I'm gonna sell my 8 after this seven stock event
Is gonna be my last show ><
Here are some pics and infos
---------------------------------------------
2004 Mazda RX-8 Lighting Yellow
Exterior:
Mazdaspeed side skirt
Mazdaspeed Spoiler
Mazda OEM F&R Aero Kit
Seibon Carbon Fiber Hood
8000K HID headlight
3000K HID fog light
JDM white side markers
Polished Aluminum?Fender Strakes
Aluminum - Front&Rear ROTARY ACCENT
Mazdaspeed F&R license plates
Engine/ Power mod:
SR Motorsports complete pulley kit
Mazdaspeed Cold Air Intake
Borla cat back exhaust system
Custom on/off fan control
15W50 MOTUL racing oil
Mazdaspeed oil cap
Greddy radiator cap
Wheels/Tires/Breaks
4xEnkei RP-F1 18x8.0
4x 235 40 18 Federal 595RS-R
Porterfield Front Racing brake pads (Track Use)
EBC Front bake pads (Yellow)(street use)
EBC Rear brake pads (Red)
EBC F&R Brake Rotors
Stoptech Stainless Brake lines
MOTUL DOT 4 racing brake oil
Suspension
4x Megan Coilovers
Mazdaspeed Front carbon fiber strut bar
Mazdaspeed Rear strut bar
Tanabe Front Sway bar 30.4mm
Tanabe Rear Sway bar 20.4mm
4 pieces under car brace
Interior:
Sparco Spirit bucket seat
Custom low position bracket
All LED light bulbs
Aluminum PEDALS
Mazdaspeed Shift ****
--------------------------------------------
#7
2005 MT Brilliant Black
Engine and Exhaust:
HKS GT2835 Custom Turbo Setup
HKS SSQV BOV
HKS Twin Power DLI II
HKS Earth Circle Grounding System
HKS SMF Element
HKS Metal Catalyzer
Greddy Manifold and Downpipe
Greddy Intercooler
Racing Beat Rev8 Catback-Exhaust
Black Halo Racing Ignition System
Black Halo Racing Throttle Body Spacer
Black Halo Racing Radiator
Mazmart RE-medy Water Pump
Mazmart RE-medy Thermostat
HKS Oil Cap
HKS 1.3 Bar Coolant Cap
AEM Water/Methanol Injection
Rotary Shaped Alternator Pulley
Sohn Oil Metering Pump
380/380/480 Injector Setup
MazdaManiac Tuned AccessPort
Brakes and Suspension:
Volk Racing SF-Challenge Diamond Black 19x8.5 19x9.5
Toyo T1-R 245/35/19 275/30/19
HKS Hipermax RS
Progress Adjustable Sway Bars
BeatRush Front Strut Bar
Racing Brake Two-Piece Open Slot Rotors
Mazdatrix Stainless Steel Braided Brake lines
Hawk HP+ Brake Pads
Interior and Exterior:
Au-To Bahn Sports Front Bumper
Au-To Bahn Sports Side Skirts
Kenstyle Rear Bumper
Au-To Bahn Trunk
OEM JDM Window Visors
Headlight/Taillight Tinted
Clear Corner Tinted
RX-8 B-Pillar Garnish
OEM Rear Foglight Brakelight
Philips 85122CX 5000K D2S
Derwankel Puddle Lights
20% Tints All Around
Vent Pod and Custom Gauge Pod
HKS D1 Shift ****
Electronics:
HKS EVC VI Boost Controller
HKS Type-1 Turbo Timer
STRI Racing Oil Temp Gauge
STRI Racing Oil Pressure Gauge
STRI Racing Boost Gauge
Innovate LC-1 with DB Gauge
Hardwired Passport 8500 X50
Optima Yellow Top D51R
Others:
Axial Flow Engineering Short Shifter
Vibrant Distribution Block
NRG Hood Damper
Engine and Exhaust:
HKS GT2835 Custom Turbo Setup
HKS SSQV BOV
HKS Twin Power DLI II
HKS Earth Circle Grounding System
HKS SMF Element
HKS Metal Catalyzer
Greddy Manifold and Downpipe
Greddy Intercooler
Racing Beat Rev8 Catback-Exhaust
Black Halo Racing Ignition System
Black Halo Racing Throttle Body Spacer
Black Halo Racing Radiator
Mazmart RE-medy Water Pump
Mazmart RE-medy Thermostat
HKS Oil Cap
HKS 1.3 Bar Coolant Cap
AEM Water/Methanol Injection
Rotary Shaped Alternator Pulley
Sohn Oil Metering Pump
380/380/480 Injector Setup
MazdaManiac Tuned AccessPort
Brakes and Suspension:
Volk Racing SF-Challenge Diamond Black 19x8.5 19x9.5
Toyo T1-R 245/35/19 275/30/19
HKS Hipermax RS
Progress Adjustable Sway Bars
BeatRush Front Strut Bar
Racing Brake Two-Piece Open Slot Rotors
Mazdatrix Stainless Steel Braided Brake lines
Hawk HP+ Brake Pads
Interior and Exterior:
Au-To Bahn Sports Front Bumper
Au-To Bahn Sports Side Skirts
Kenstyle Rear Bumper
Au-To Bahn Trunk
OEM JDM Window Visors
Headlight/Taillight Tinted
Clear Corner Tinted
RX-8 B-Pillar Garnish
OEM Rear Foglight Brakelight
Philips 85122CX 5000K D2S
Derwankel Puddle Lights
20% Tints All Around
Vent Pod and Custom Gauge Pod
HKS D1 Shift ****
Electronics:
HKS EVC VI Boost Controller
HKS Type-1 Turbo Timer
STRI Racing Oil Temp Gauge
STRI Racing Oil Pressure Gauge
STRI Racing Boost Gauge
Innovate LC-1 with DB Gauge
Hardwired Passport 8500 X50
Optima Yellow Top D51R
Others:
Axial Flow Engineering Short Shifter
Vibrant Distribution Block
NRG Hood Damper
Last edited by NgoRX8; 09-16-2009 at 01:22 AM.
#12
oh that area, just don't remember an online vote for it.
Anyway....
Some of this stuff really doesn't matter because you can't see it but here ya go.
Under the Hood:
Koyo Radiator
Aem intake
MazdaMainiac Cobb Accessport tuned
Greddy turbo (BHR custom install)
HKS SSQ BOV
BHR Ignition upgrade
Unorthodox Racing Underdrive pulley kit
Mazmart water pump
Mazda Euro hood struts
Rotor dipstick/oil cap
Wheels/Suspension/Brakes:
Tein Coilovers
Mazdaspeed strut bar
ASA 18x9 wheels, 255x40x18 tires
Cross drilled and slotted rotors
Hawk hps pads
Stainless steel brake/clutch lines
Interior:
Mazda IPOD integration kit
Petit Racing Rotory Radio ****
AxialFlow short shifter
Aluminum foot pedals
Aluminated footwells
Red interior lighting
Mazda OEM seat covers
Garmin Navigation system (in center console nav tray)
Exterior:
Complete appearance package
Clear Corners/steath bulbs
Euro lip Spoiler
Clear Bra
Side mirror Ground illumination lights (also know as puddle lights)
Apexcone Hids
Xenon plazma fogs
Vertical doors Inc. Hinge kit
Rotary accents/stem caps
Oil Cooler protection screens
Strakes
Fog light DRL rewire
Some exterior shots
Some Engine bay shots
and of course a cool nose shot (well I like it)
Anyway....
Some of this stuff really doesn't matter because you can't see it but here ya go.
Under the Hood:
Koyo Radiator
Aem intake
MazdaMainiac Cobb Accessport tuned
Greddy turbo (BHR custom install)
HKS SSQ BOV
BHR Ignition upgrade
Unorthodox Racing Underdrive pulley kit
Mazmart water pump
Mazda Euro hood struts
Rotor dipstick/oil cap
Wheels/Suspension/Brakes:
Tein Coilovers
Mazdaspeed strut bar
ASA 18x9 wheels, 255x40x18 tires
Cross drilled and slotted rotors
Hawk hps pads
Stainless steel brake/clutch lines
Interior:
Mazda IPOD integration kit
Petit Racing Rotory Radio ****
AxialFlow short shifter
Aluminum foot pedals
Aluminated footwells
Red interior lighting
Mazda OEM seat covers
Garmin Navigation system (in center console nav tray)
Exterior:
Complete appearance package
Clear Corners/steath bulbs
Euro lip Spoiler
Clear Bra
Side mirror Ground illumination lights (also know as puddle lights)
Apexcone Hids
Xenon plazma fogs
Vertical doors Inc. Hinge kit
Rotary accents/stem caps
Oil Cooler protection screens
Strakes
Fog light DRL rewire
Some exterior shots
Some Engine bay shots
and of course a cool nose shot (well I like it)
Last edited by azlizard; 09-17-2009 at 08:56 PM.
#15
#18
07 Galaxy Gray RX8,
Rota Grid 18x9.5 +38,
Blacked Emblems,
red AEM CAI,
SR Motorsports Pulleys,
RP SuperCat,
Alutec Special Edition Strut Bar,
Greddy SP2 Exhaust
Red magna core ignition wires
window weather guard
Custom LED Footwells
Extreme Black Strakes
Black lugnuts
Grounding Kit,
Red LEDs,
Custom 3rd Rotary break light,
Vinyl covered corners,
Blue Foglights,
5% tint
red/black door pannels
Red leather ebreak (shiftstyle)
Rota Grid 18x9.5 +38,
Blacked Emblems,
red AEM CAI,
SR Motorsports Pulleys,
RP SuperCat,
Alutec Special Edition Strut Bar,
Greddy SP2 Exhaust
Red magna core ignition wires
window weather guard
Custom LED Footwells
Extreme Black Strakes
Black lugnuts
Grounding Kit,
Red LEDs,
Custom 3rd Rotary break light,
Vinyl covered corners,
Blue Foglights,
5% tint
red/black door pannels
Red leather ebreak (shiftstyle)
Last edited by Fortunate Few; 09-11-2009 at 01:53 AM.
#20
exactly!
if you aren't Forced Induction at this point your chances of getting in are slim to NONE. (and slim just left)
Besides, Ngo's the ONLY guy around here with an HKS turbo!
if you aren't Forced Induction at this point your chances of getting in are slim to NONE. (and slim just left)
Besides, Ngo's the ONLY guy around here with an HKS turbo!
#22
Gregs, I believe people have until the end of today to submit then I'm sure a thread will go up for voting.
Andy: Please feel free to correct me if I'm wrong.
Also, how many RX-8's will be chosen?
Andy: Please feel free to correct me if I'm wrong.
Also, how many RX-8's will be chosen?