When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok the car is all back together, well except for the front bumper and wheels. I've been trying to start her up. I get strong even pulses on both rotors. No compression tester tho. But i pulled the plugs and and don't smell any gas on them, nor at the tail pipe. I have 55psi on the fuel gauge but it doesn't seem to be getting gas. I checked my injector connections. Is there a fuse for the injectors I'm mussiing? I can't see the forest for the trees right now so any suggestions would be appreciated.
Yep my fuel pump resistor is connector. And I have fuel pressure on the gauge. Should I smell gas on the plugs? Especially after cranking on it a bunch without it starting?
something is up with the injectors firing. If there is fuel pressure then the injectors is where I would be looking. if you have been cranking for some time, I would assume there would be traces of fuel on the plugs. Is your Maf facing the correct way?
Thanks Travis but I just checked another hub and crank angle wheel and it can only go on one possible way. It can't even be flipped over. It's starting to act like it wants to catch but never quite does. I think I need to do a compression check before I start chasing my tail.