What did you do with your RX8 today?
#2751
Registered
New "brake lines"
So because I didn't swap over the hard lines to the rear brakes going to the ABS and instead retaining the S1 lines, they don't reach the S2 ABS unit so I had to come up with a work around and that work around is stainless RX-7 FB clutch hoses lol
A while ago the stainless clutch hose in my (now totaled) FB RX-7 had caught on fire (likely due to grounding to the transmission - only cause I can think of) and I didn't want to keep waiting for oreilys to get one in so I took the clutch hose out of my R3 parts car, added an adapter and installed it in the FB and it worked great. Then I found out that my S1 brake lines wouldn't reach the connections on the S2 ABS as they're in front of it instead of the back and I needed a reliable line with female and male fittings to bridge the lines to the ABS, well the FB RX-7 clutch hose has exactly that so I ordered two stainless braided clutch hoses from mazdatrix and will be installing them probably sometime today
#R3S1 #MazdaspeedR3
A while ago the stainless clutch hose in my (now totaled) FB RX-7 had caught on fire (likely due to grounding to the transmission - only cause I can think of) and I didn't want to keep waiting for oreilys to get one in so I took the clutch hose out of my R3 parts car, added an adapter and installed it in the FB and it worked great. Then I found out that my S1 brake lines wouldn't reach the connections on the S2 ABS as they're in front of it instead of the back and I needed a reliable line with female and male fittings to bridge the lines to the ABS, well the FB RX-7 clutch hose has exactly that so I ordered two stainless braided clutch hoses from mazdatrix and will be installing them probably sometime today
#R3S1 #MazdaspeedR3
#2755
#2756
6 rotors....I want more!
I think the black underside does not go well with the shape of the rear.
It does in other cars, not on this one.
That is probably why Mazda did away with it on the later RX8 Gen II
It does in other cars, not on this one.
That is probably why Mazda did away with it on the later RX8 Gen II
#2758
Registered
iTrader: (1)
Join Date: May 2016
Location: Colo'freakin'rado
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
I've not done anything today, but I'll be compression testing it this weekend and getting gas tonight probably, and filling it with some premix. Maybe I'll take it and the wife to dinner.
#2759
Registered
iTrader: (1)
Tried to get it started. Battery voltage was low, so I used GF's car to jump it. Put jumper cables and other car away while RX-8 warmed up, then as I was getting ready to go, it died. So I jumped it again - it idled for a few minutes then died again. Probably due to combination of vacuum leak + increased electrical load from charging dead battery. Had to take the GF's Honda Fit to work
Going to try jumping & charging battery tonight, if not successful - time for new battery.
Going to try jumping & charging battery tonight, if not successful - time for new battery.
#2760
Registered
Installed a few things and buttoned up a little
The handle on my dipstick broke off so I needed a replacement, however, I couldn't find any replacements that were reasonably priced so I ordered one of those little rotor shaped handles for the S1 dipstick and did some custom fitting grinding down the plastic, adding the head off an old burned out dremel and then fiberglassing a nail into it, cutting the nail and then put the rotor handle on and it came out great:D
I also installed the RX-7 FB clutch hoses that i'm using as brake line extensions to bridge the S1 rear brake lines to the S2 ABS
#R3S1 #MazdaspeedR3
I also installed the RX-7 FB clutch hoses that i'm using as brake line extensions to bridge the S1 rear brake lines to the S2 ABS
#R3S1 #MazdaspeedR3
Last edited by @italia916; 08-24-2016 at 11:46 PM.
#2761
1% evil, 99% hot gas.
iTrader: (21)
I introduced the '8 to a 50 lb box of sexy implants from Sweden that Big Brown Santa left on the doorstep today:
Fresh from their revalving in the bowels of North Carolina:
Its going to be a fun weekend.
Fresh from their revalving in the bowels of North Carolina:
Its going to be a fun weekend.
Last edited by wankelbolt; 08-26-2016 at 10:18 AM.
#2764
///// Upscale Zoom-Zoom
#2765
Water Foul
#2767
Administrator
iTrader: (7)
#2769
1% evil, 99% hot gas.
iTrader: (21)
Up in the air.
Out with the old.
Beloved but spent, broken, and leaky old bastards. (Progress springs for sale soon...)
Next: Rear shocks. Then: The Swift and the Swedish goes in.
13k/8k ought to be stiff enough to knock my fillings out...
Out with the old.
Beloved but spent, broken, and leaky old bastards. (Progress springs for sale soon...)
Next: Rear shocks. Then: The Swift and the Swedish goes in.
13k/8k ought to be stiff enough to knock my fillings out...
#2771
Administrator
iTrader: (7)
#2774
Administrator
iTrader: (7)