When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Okay, I'm not sure how his happened, but there was about a quart overfill on my 2005 6MT Rex.
I've not only had no reliability issues, but this is the first CEL my 8 has thrown in 11 1/2 years.
So I go to a friend who helps me out (and I help him out on stuff), and he pulls the code which reads:
"P2070 Intake Manifold Tuning Valve Stuck Open Bank 1"
So we proceed to drain 1 quart of oil, so that oil on disptick is just below full level. He and I agree that since the motor isn't misbehaving, I should go and rev the sh*t out of it on a long ride, and try to free up the stuck valve (IF that's the real issue).
So only into 2 miles of driving, the CEL goes away. I shut down the car and wait for about 15 minutes, and the CEL does NOT come back on.
I proceed to drive the car for another 10 miles or so with no problems whatsoever, on surface roads, highways. etc. No idle issues, strange noises - nothing.
Here are my questions:
Should I check the MAF Sensor?
Should I check the air filter to see if oil soaked it due to the overfill?
Should I run some Chevron Techron Concentrate (black bottle) through a tank of fresh gas now?
What other potential problems could this have caused, even though I made sure to drain the overfill literally within 20 minutes of the CEL coming on, the car is running great, and the CEL hasn't back on with the oil at the proper level now?
THANKS BROS.
Last edited by RotoRocket; 01-30-2017 at 10:02 PM.
Okay, I'm not sure how his happened, but there was about a quart overfill on my 2005 6MT Rex.
I've not only had no reliability issues, but this is the first CEL my 8 has thrown in 11 1/2 years.
So I go to a friend who helps me out (and I help him out on stuff), and he pulls the code which reads:
"P2070 Intake Manifold Tuning Valve Stuck Open Bank 1"
So we proceed to drain 1 quart of oil, so that oil on disptick is just below full level. He and I agree that since the motor isn't misbehaving, I should go and rev the sh*t out of it on a long ride, and try to free up the stuck valve (IF that's the real issue).
So only into 2 miles of driving, the CEL goes away. I shut down the car and wait for about 15 minutes, and the CEL does NOT come back on.
I proceed to drive the car for another 10 miles or so with no problems whatsoever, on surface roads, highways. etc. No idle issues, strange noises - nothing.
Here are my questions:
Should I check the MAF Sensor?
Should I check the air filter to see if oil soaked it due to the overfill?
Should I run some Chevron Techron Concentrate (black bottle) through a tank of fresh gas now?
What other potential problems could this have caused, even though I made sure to drain the overfill literally within 20 minutes of the CEL coming on, the car is running great, and the CEL hasn't back on with the oil at the proper level now?
if
THANKS BROS.
Couldn't hurt to check intake and intake track and make sure no oil or excessive residue is present. I don't believe running any cleaner (Techron or anything) truly helps a whole lot and isn't worth it IMO but if it helps you sleep better at night! Excess oil can hurt the cat if I'm not mistaken, if you have one but not sure how long its been overfilled.
The intake valve stuck open code shouldn't result from extra oil, so don't be surprised if it comes back. These things happen, the valves clog up with deposits. Search for SSV cleaning, requires taking the intake apart a little bit, but nothing too crazy.