25MM spacers with stock wheels and 245/40-18's = Flush :)
#355
Registered
Join Date: Feb 2009
Location: Alberta, Canada
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Thanks 9k - one last questions if you'll indulge me. While I agree 20mm in the front and 10 mm in the back seems logical based on the offsets and wheel sizes, I truly don't have a good grasp on wheel spacing. When I measure both the front and back wheels by placing a level up against the car and measuring the gap from the wheel, I seem to get 15mm for both the front and the rear. I'm guessing something is wrong with this technique as that makes me think 15mm all around. If someone could shed some light on this for me I would greatly appreciate it. Pic on the left is the back and right is the front
#359
Registered
iTrader: (2)
Join Date: Oct 2009
Location: Surrey, BC
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Regarding the safety of using spacers, I came across this video. There is a GTR mentioned, that uses 2 x 50mm spacers in the rear (yes, that's 2 stacked, to give 100mm) on a car that produces 1000 RWHP lol.
Last edited by van; 04-28-2017 at 10:54 PM.
#361
You stated earlier in this thread you would remove them for track days, do you feel they are unsafe for this or just mechanically rough on the car?
#362
SARX Legend
Thread Starter
iTrader: (46)
I mean technically they should cause premature wheel bearing wear. But you would have to track a lot and honestly heavily tracked cars that don't use spacers tend to go thru wheel bearings so I don't think spacers cause any issues at all. I ran them for a very long time and I am still on my factory wheel bearings at 155k+ miles.
#363
I mean technically they should cause premature wheel bearing wear. But you would have to track a lot and honestly heavily tracked cars that don't use spacers tend to go thru wheel bearings so I don't think spacers cause any issues at all. I ran them for a very long time and I am still on my factory wheel bearings at 155k+ miles.
i am of the same opinion as you, i just wanted to hear your take on it specifically.
That being said, do you prefer the h&r or the eibach kits?
#366
Sicker than your average
Join Date: Nov 2012
Location: Colombo, Sri Lanka
Posts: 1,015
Likes: 0
Received 14 Likes
on
13 Posts
I'm running 245 40 R18s too. If I roll the rear fenders, will it still rub with 25mm spacers? I don't want the front wheels rub at full lock. What do you guys recommend for the front wheels?
P.S. Every time I feel like getting spacers, I come across a thread like this :/
https://www.clublexus.com/forums/is-...2-spacers.html
P.S. Every time I feel like getting spacers, I come across a thread like this :/
https://www.clublexus.com/forums/is-...2-spacers.html
#371
Pew Pew Pew
iTrader: (10)
Are you lowered? That's an important part of this whole discussion.
Also to reference the other guy, you can run smaller than 20mm spacers on the stock studs. I had 10mm bolt on spacers without issues and 5mm slip on spacers (not at the same time). Maybe he means bigger than 20mm slip on spacers would need longer studs which I would agree with.
Also to reference the other guy, you can run smaller than 20mm spacers on the stock studs. I had 10mm bolt on spacers without issues and 5mm slip on spacers (not at the same time). Maybe he means bigger than 20mm slip on spacers would need longer studs which I would agree with.
#372
Registered
Not yet. Not sure why that would even things up ? From standard there is more clearance in the rear . Nothing in thread title or first posts about lowering ? Spot on would be rear 25mm spacer and 15mm-20mm front spacers
Last edited by Sydo; 09-26-2018 at 10:49 PM.
#374
Registered
wheel specs ? The thread title is for stock wheels with 25mm spacers with 245/40/18 and no lowering. I have this exact combination and fronts poke out beyond fenders as a couple before have reported so not flush. Had a passenger last night and rubbed on all corners rears are rolled. So lowering would create more rubbing ?
Last edited by Sydo; 09-27-2018 at 04:52 PM.