My 04 BB GT Progress
#276
Registered
Thread Starter
#277
Registered
Thread Starter
Had to do a little trimming to the border piece, but got it to fit nicely, no more gap around the head unit. Also showing how clean the system looks when not open as a display. If only the PO didn't gouge up the dash :-/
Last edited by Jazer; 09-04-2017 at 01:27 PM.
#278
Registered
Thread Starter
Shiney car :D Hoping it keeps it's freshly waxed look for a few days. Downfall of black - it looks dirty so quickly.
Side note - I don't normally park in the grass - had to wait for the hubs to move the GTO so I could pull back into the garage :P
Side note - I don't normally park in the grass - had to wait for the hubs to move the GTO so I could pull back into the garage :P
#279
You gonna eat that?
iTrader: (1)
Did you put the stakes on?
I think they look better without, especially BBs.
#281
Dark Moderator
iTrader: (18)
I can't get behind that flip up stereo..
I installed one in my 05 Sentra back in the Ft. Hood days.
Didn't like.it...
Installed a 7 inch(iirc)in dash touch screen in the 8, love it.
Debating what to put in the F250.
Oh yeah, Hi !
Travis
I installed one in my 05 Sentra back in the Ft. Hood days.
Didn't like.it...
Installed a 7 inch(iirc)in dash touch screen in the 8, love it.
Debating what to put in the F250.
Oh yeah, Hi !
Travis
#282
"Shiney car :D Hoping it keeps it's freshly waxed look for a few days. Downfall of black - it looks dirty so quickly."
But before it does, it looks oh-so-good.
But before it does, it looks oh-so-good.
Last edited by New Yorker; 09-15-2017 at 09:47 AM.
#283
Registered
Thread Starter
Actually in AL atm - hubs is in flight school down here, but yeah we normally live just south of Raleigh We'll be back in the spring. I see you're from the area too.
#284
Registered
Thread Starter
I would have much preferred a double din - however, we pulled this out of the Evo when we sold it - so we already had it... and it is a million times nicer than the piece of **** that was in the Rx8 when I bought it, lol. Sound quality is better, allows me to put movies on for my kid if she gets bored, reverse camera, bluetooth, has the aux inputs for better compatibility with the Bose... so waaaaay nicer. eventually Ill put a double din in there but Im super happy with it overall. I like how clean and not eye catching it is when it's folded back in - for creepin eyes when It's parked somewhere. Don't like how it covers the vents, but again, folds away so not a big deal.
The following users liked this post:
Williard (09-16-2017)
#285
Registered
Thread Starter
#286
Registered
Went to NC State so south of Raleigh is no foreign land to me. I'm currently living on the Durham side of the RDU airport.
#287
Registered
Thread Starter
Nice - my hubs is basically going to be working there - as an Apache pilot for the NC National Guard - they are attached right next to RDU.
#288
///// Upscale Zoom-Zoom
What wax did you use? Very nice!
#289
Registered
Thread Starter
I use this right now, it works pretty good. Im no professional and I hand buff the whole thing, but it seems to be doing a decent job.
#290
Actually, considering the many curves and lines of the car - one could argue that it's "busy" - perhaps the dark color does the overall appearance a favor.
#291
Registered
Thread Starter
Dropped the car off to get the control arms done - When I sched the appt I specifically requested they order the bolts due to what's been happening to everyone else. She told me they had done 7-8 other Rx-8s without a problem, I said "okayyyyyy" knowing they'd probably need at least 1... well I got my update in the afternoon - one was so stuck they had to cut it out, and put an emergency order in to Mazda for the bolt. Makes no difference to me - my car is stuck on their rack without a wheel and it's my 1x a week car anyways.. They always give me a loaner, so here is the temp ride which is saving miles on my DD Subaru, haha.
#292
Registered
Thread Starter
Been a long time since I posted. Not much has changed on the car. New battery. New revised coil bracket... but took some pictures with my friend before she sells her BRZ, so here they are :P
Last edited by Jazer; 02-18-2018 at 04:09 PM.
#293
Registered
Thread Starter
#294
Smoking turbo yay
^Should throw an S2000 in there as well.
I see a lot of Toyobarus around my area. Some of them have ungodly loud exhausts on them.
You also made me realize how dirty my car is. Thanks, BC rainter.
I see a lot of Toyobarus around my area. Some of them have ungodly loud exhausts on them.
You also made me realize how dirty my car is. Thanks, BC rainter.
#295
Registered
Thread Starter
My car is actually covered in dust. Thanks to it being later/dusk, you can't tell in these photos. Only the closeups, which I have neglected to post
#297
Registered
I just went through the whole thread last night and look forward to more updates as well. Great inspiration as I am preparing to 'restore' a well-abused BB RX-8 GT. Awesome that wifey is the one keeping the fleet running and doing all the car enthusiast stuff.
How do you like the quality of the eBay fender strakes? I have the whole OEM accent kit, but my strakes are missing. Trying to decide if I should hold out for an OEM set or just get the aluminum aftermarket ones.
How do you like the quality of the eBay fender strakes? I have the whole OEM accent kit, but my strakes are missing. Trying to decide if I should hold out for an OEM set or just get the aluminum aftermarket ones.
#298
Registered
Thread Starter
Thank you! Not much for updates lately. I had a baby a few months ago AND we finally just moved back home, so we've been busy. The 8 caught a ride home this time and didn't have to make the 9 hr drive again, haha.
Awesome! I look forward to seeing progress from you if you make a thread!
My fender strakes are the ABS plastic version (I didn't want aluminum, I would have painted them black anyways, so they were a better choice for me).. I forget the company name that makes them. Fitment is about 90%. There is a slight gap where they dont fit PERFECTLY to the corner of the body by the fender arch, but it's very minimal.
I just went through the whole thread last night and look forward to more updates as well. Great inspiration as I am preparing to 'restore' a well-abused BB RX-8 GT. Awesome that wifey is the one keeping the fleet running and doing all the car enthusiast stuff.
How do you like the quality of the eBay fender strakes? I have the whole OEM accent kit, but my strakes are missing. Trying to decide if I should hold out for an OEM set or just get the aluminum aftermarket ones.
How do you like the quality of the eBay fender strakes? I have the whole OEM accent kit, but my strakes are missing. Trying to decide if I should hold out for an OEM set or just get the aluminum aftermarket ones.
My fender strakes are the ABS plastic version (I didn't want aluminum, I would have painted them black anyways, so they were a better choice for me).. I forget the company name that makes them. Fitment is about 90%. There is a slight gap where they dont fit PERFECTLY to the corner of the body by the fender arch, but it's very minimal.
#299
Registered
Thank you! Not much for updates lately. I had a baby a few months ago AND we finally just moved back home, so we've been busy. The 8 caught a ride home this time and didn't have to make the 9 hr drive again, haha.
Awesome! I look forward to seeing progress from you if you make a thread!
My fender strakes are the ABS plastic version (I didn't want aluminum, I would have painted them black anyways, so they were a better choice for me).. I forget the company name that makes them. Fitment is about 90%. There is a slight gap where they dont fit PERFECTLY to the corner of the body by the fender arch, but it's very minimal.
Awesome! I look forward to seeing progress from you if you make a thread!
My fender strakes are the ABS plastic version (I didn't want aluminum, I would have painted them black anyways, so they were a better choice for me).. I forget the company name that makes them. Fitment is about 90%. There is a slight gap where they dont fit PERFECTLY to the corner of the body by the fender arch, but it's very minimal.
Not much happening with mine so far. I isolated the engine issue to a blown coolant seal, so a rebuild/reman is in my future. I don't want to start working on it until I sell my Miata though. It'll be easier to drop large sums on the RX-8 if I don't have a car payment to be bothered with. Once running properly, I'll start working on clean up and visual improvements; I'll just have to keep admiring yours (and 9k's) in the interim.
Last edited by furansu; 05-21-2018 at 02:52 PM.
#300
Registered
Thread Starter
Congrats on the kiddo! Exciting stuff for sure. I'm sure you're happy to be back home -- same house or just same town? I really enjoyed our cross-country trip from Florida to Colorado in the Miata, but it was stressful and exhausting due to time constraints and weather challenges. I'm glad I did it though, it was a life experience and something I wish I had dared to do many years earlier.
Not much happening with mine so far. I isolated the engine issue to a blown coolant seal, so a rebuild/reman is in my future. I don't want to start working on it until I sell my Miata though. It'll be easier to drop large sums on the RX-8 if I don't have a car payment to be bothered with. Once running properly, I'll start working on clean up and visual improvements; I'll just have to keep admiring yours (and 9k's) in the interim.
Not much happening with mine so far. I isolated the engine issue to a blown coolant seal, so a rebuild/reman is in my future. I don't want to start working on it until I sell my Miata though. It'll be easier to drop large sums on the RX-8 if I don't have a car payment to be bothered with. Once running properly, I'll start working on clean up and visual improvements; I'll just have to keep admiring yours (and 9k's) in the interim.
We own our house, we moved out of state for my husband's job (military)... so we rented it out while we were gone, and then moved back in. Worked out great, fortunately.
New Miata I take it? Too bad about needing a rebuild. Mine was rebuilt at Rotary Resurrection just before I purchased it. He is one of the few I would recommend due to his experience and knowledge.