BadlanzHPE electric cutout (10hp + )
#1
Registered
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: California
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
BadlanzHPE electric cutout (10hp + )
Category: Accessories
Price: $0
Private or Vendor Listing: Private Listing
Location (US State/Canada/Int): CA
Item Condition: Used
Selling BadlanzHPE electric cutout. (again)
more info on www.badlanzhpe.com
I have used this cutout for about two years.
2.5 inch inner diameter valve.
The motor is an upgraded super duty motor, just freshly re-built. ($60)
The valve closes and opens perfectly- rebuilt and confirmed by BadlanzHPE.
The one touch control is a brand new unit ($110). It also comes with two remote controllers. Here's a picture of what it looks like. Brand new item. Control unit (blackbox) comes with 5 year warranty, two remote controllers come with 1 year warranty. (They are BRAND NEW!!!)
I dynoed it and made about 10hp at the wheels. Dyno from Fast Freddys aka Rotary Reliability.
this is a picture of it installed in my 8.
What I'm selling DOES NOT include the y-pipe. (notice the X).
A switch ($15 value) and a 10ft cable ($15 value) also will be included.
Basically you get everything you need to install the cutout minus the y-pipe, and a gasket.
They are available from www.badlanzhpe.com for $30 (y-pipe and gasket), or you can buy other ones from ebay or online, or you can also make one if you have the skills to do so.
Please be aware that this is a used part. Although some of the parts are new, other parts will show signs of normal wear and tear.
SOLD
Price firm.
Sold As Is (badlanzhpe will honor the warranty, not me).
Paypal accepted.
I have 100% feedback rating from ebay.
http://myworld.ebay.com/trustbuddy
Thanks for looking.
Last edited by trustbuddy; 07-31-2010 at 03:52 PM. Reason: sold
#3
Registered
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: California
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
badlanzhpe will not sell the heavy duty motor without the one touch controller.
do the math at badlanzhpe website. even without the y-pipe, your looking at $250.
Considering the motor was rebuilt-good as new condition, and the controllers are "just opened from wrapping to take pictures" brand new, i feel that $199 shipped is a fair deal.
#11
Registered
Thread Starter
iTrader: (3)
Join Date: Apr 2006
Location: California
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
from what i know, no body yet on a 8.
i've seen them on wrx's and turbo civics....
generally speaking, this "exhaust dump setup" would do very well with almost any turbo engines...
i've seen them on wrx's and turbo civics....
generally speaking, this "exhaust dump setup" would do very well with almost any turbo engines...