{ FS } "GReddy" Turbo kit FS - 20G turbo
#1
n0 pants
Thread Starter
Join Date: Aug 2009
Location: NYC Metro
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
"GReddy" Turbo kit FS - 20G turbo
Category: Engine - Power Adders
Price: $1850
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): Series I
Location (US State/Canada/Int): VA
Item Condition: Used
Blew up the engine in my 8 (my fault..) This will be the second time so i'm going to go with N/A this time 'round. You're going to want to get new injectors if you plan on running upwards of 9.5-10psi depending on what condition your motor is in.
SOLD
The kit is $1850 plus shipping, FIRM. The only GReddy pieces in this kit really is the downpipe, manifold, and piping, everything else has been replaced. This is a full turbo kit.
$1850 flat for local pickup
The kit is still on the car, and I won't be removing it until I have a buyer. Turbo looks exactly like the GReddy turbo, same housings - but the CHRA is a 20G-TD06H, not an 18G like the stock GReddy. The turbo has ~9,000 miles on it. Here's what comes in the kit..
20G-TD06H turbo, fix #2
Manifold (No stress cracks or otherwise)
Downpipe
All piping (Piping has been buffed and polished by myself)
ATP Turbo couplers (Silicon, black)
TiAL Q BOV
Turbosmart boost controller (Boost Tee, black)
.050" restrictor for oil feed
Oil filter sandwich plate
Godspeed intercooler (10x30x3)
Oil drain adapter for stock oil pan (no drilling required)
All gaskets
BHR black intake undertray
I'll also throw in the STRI 60mm boost gauge and pod (edit: Also, Gauge has peak recall and a warning limit adjustable by the user, comes with a button that you can mount remotely)
Kit also comes with a brand new weldable aluminum flange for the MAF sensor if you'd like to make your own intake.
BHR Walbro 255lph fuel pump - SOLD
Cobb AP - SOLD
Anyways...this kit rocks. If I had a second car i'd be keeping it.
Here's some pictures
Last edited by Frosty288; 03-23-2011 at 08:40 PM.
#4
n0 pants
Thread Starter
Join Date: Aug 2009
Location: NYC Metro
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Not looking to part it out at the moment
edit: Here's some pics of the turbo and stuff. Really nothing special here, the housings are both GReddy housings so it looks the same.
However, i'm kinda sad I didn't get pics of the new CHRA before I put it in :/
The one of the engine bay was right after the kit was installed. Still had some work to do, but thought i'd share it anyhow
edit: Here's some pics of the turbo and stuff. Really nothing special here, the housings are both GReddy housings so it looks the same.
However, i'm kinda sad I didn't get pics of the new CHRA before I put it in :/
The one of the engine bay was right after the kit was installed. Still had some work to do, but thought i'd share it anyhow
Last edited by Frosty288; 02-08-2011 at 07:06 PM.
#9
FULLY SEMI AUTOMATIC
iTrader: (9)
still got the cobb?
#11
n0 pants
Thread Starter
Join Date: Aug 2009
Location: NYC Metro
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Never got it dynoed but due to the fact you would most certainly need new injectors I would guess somewhere around 300whp, I never took it above 9psi, but I wish I couldve seen the kit run at around 13-14
Yes i still have the cobb, pm coming..
Yes i still have the cobb, pm coming..
#16
n0 pants
Thread Starter
Join Date: Aug 2009
Location: NYC Metro
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Gunna have to start getting in line for the Cobb lol, pending sale on it right now, and someone is in line after that..M3D1C you are third in line
And Phrenetik, I know it's not part of the kit but I would like to believe part of the package.
And Phrenetik, I know it's not part of the kit but I would like to believe part of the package.