{ FS } Carbon8's NA Built RX8 For Sale
#1
Carbon8's NA Built RX8 For Sale
Year: 2004
Make: Mazda
Model: RX-8
Price: $12000
Mileage: 33678
Color: Red
Private or Dealer Listing: Private Listing
Location (US State/Canada/Int): NY
Feeler Sale
https://www.rx8club.com/series-i-maj...-build-242275/
Considerable Note
This car is not being sold to your typical fashion consumer, it is not driven towards a DD, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like I have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. If you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
Car is now 1 of 4 that I own and I do not share the same passion and excitement for it that I once did. I still love everything about this car and the reasons that I purchased this car were to build, learn, and develop my engineering and analytical skills during the build. A lot of money, but more so time has been invested into every detail of this build which has been captivated a 26 page build thread with the home page listed below.
Car is being sold for $13000 OBO, but at the same time I reserve the right to not let the car go, as I could still see myself continuing this journey at a later point in my life years down the road. Will entertain serious offers not low ballers.
Please note car is being sold NA only with all parts listed below, the Pettit SC kit will be sold individually at a later date. Please reach out to me with any questions or comments.
*Pettit SC listed for Sale, will include with the purchase of this car for $4,000.
https://www.rx8club.com/rx-8-parts-s...2/#post4726699
Please call or email Ryan with any questions (716)3612410, Kpower@exactmm.com.
-------------------------------------------------Table Of Contents-------------------------------------------------
Post 2 Engine Removal and Engine Bay Strip
Post 3 Engine Bay Paint and Pettit Motor
Post 4 LIM Disassembly
Post 45 LIM VDI/SSV Cleaning
Post 69 Engine Bay and Short Block Assembly Start
Post 119 Short Block Assembly Cont
Post 129 Engine and Bay Assembled
Post144 Engine and Supporting Modifications Install
Post145 Engine and Supporting Modifications Install Cont
Post 223 Engine First Start
Post 230 AutoExe Steering Wheel and Gauge Install
Post 297 Dyno (7/28/13)
Post 303 Dyno Misfire
Post 313 Fouled Plugs and Premix Case
Post 324 R1Concepts Brake Install
Post 327 Porosity Tab Idle
Post 357 More Misfires With Fouled Plugs and Oil Test Report (08/6/13)
Post 377 Coil Dwell Misfire Related
Post 464 Engine Compression Test
Post 514 Chassis Restoration Start
Post 530 Chassis Stripped
Post 537 Engine Compression Test Normalized
Post 538 Engine Oil Test (01/10/14)
Post 547 Injector Cleaning
Post 548 Bolt Restoration DIY (Black Oxide)
Post 549 Chassis Assembly
Post 554 Engine Install Bottom
Post 570 Chassis/Suspension Build Complete
Post 606 BHR Long Tube Header Install
Post 613 BHR Long Tube Header Dyno
Post 618 Fire Extinguisher Install
Originally Purchased March 3rd 2012
Last On Road (6/16/14)
Engine Bay
Interior
Current Diagnostic Data
Normalized Compression Results (01/29/14
Rotor 1
Rotor 2
Engine Oil Test (03/15/15)
Dyno; Black is before BHR header, Red is all Mods(3/19/15)
Coilover Dyno Plot Top Front, Bottom Rear(2/10/15)
----------------------------------------------------Modifications----------------------------------------------------
Brakes
- Eddlebrock SS Brake Lines
- Hawk HPS Brake PAds
- R1 Concepts Drilled and Slotted Rotors
Drivetrain
- Pettit Racing Street Ported 13B RENESIS W/ FD 3mm 2 Piece Apex Seals and Proprietary Oil and Cooling Jacket Modifications
- BHR Ignition Kit
- Supernow Underdrive Pulley Kit
- ACT HDSS Clutch
- ACT Prolight Flywheel
- Clutch Reinforcement Bracket
- Rx8Performance Oil Coolers and Line W/ External Tstat@175C
- Mazmart High Pressure Oil Regulator
- Greddy Oil Pan
- Raceroots Oil Filter Relocation
- SOHN Adapter
- Mazmart Water Pump and Tstat
- Ron Davis Radiator
- FAL 440 Cooling Fans
- Mishimoto Upper and Lower Radiator Hose
- Autobahn88 Radiator hose
- Series 2 Transmission
- S2 Short Shifter
- Eddlebrock SS Clutch Line
- Raceroots Syncro Saver
- S2 Starter
- Gates Racing Belts
- Racing Beat Condenser and Oil Cooler Screens
- Rx8Performance Motor Mounts
- Rx8Performance Trio Canister (SOHN, Catch Can, Washer Fluid)
Engine Management
- Cobb AP Pro Tune
Exhaust/ Intake
- AEM/MS CAI
- BHR Long Tube Header
- BHR Resonated Long Tube Header Midpipe
- ExoticSpeed R2-Titan Catback
Exterior
- 5% Tint
- Stealth Markers
- LED Parking,Tail, Marker, License Plate Bulbs
- EFX Exotic Red Hi,Low,Fog HID Conversion
Fluids
- ATE Super Blue Racing Brake Fluid
- Redline MT-90 GL-4 Transmission Fluid
- Redline 75W90 GL-5 Differential Fluid
- FL-22 Mazda Coolant
- Mobile 0W-40 Engine Oil
- Protek-R Premix and SOHN FLuid
- S2 Oil Filter
Gauges
- Wideband A/F
- Fuel Pressure
- Boost/Vacuum
- Oil Temperature
- Oil Pressure
- Water Temperature
- Racing Beat Water Temperature Adapter
- Aeromotive Fuel Line Adapter
- Lotek Dash Gauge Pod
- Racing Beat Lower Gauge Pod
Interior
- AutoExe Steering Wheel
- Pioneer Appradio 2
- Metra 95-7510HG Dash Kit
- Metra Axxess ASWC Steering Wheel Integration
- PLX WIFI OBD2 Dongle
- Rx8Performance OBD Relocation Bracket
- Steeda Performance OBD No Flash Cover
- Embroidered Floot Mats
- Redline Leather Shift Boot
- Red Ambient Light Kit
Safety Equipment
- H3R Performance Haltron 2.5lb Extinguisher
Suspension
- BC BR 8K/10K Coilovers
- Progress Tech Front and Rear Sway Bars
- Power Grid Front and Rear End Links
- MazdaSpeed Front Strut Support With Brake Boost Brace
- Beatrush Rear Strut Support
- Megan Racing Camber Arms
- Megan Racing Lateral Arms
- Megan Racing Toe Arms
- Megan Racing Traction Rods
- Megan Racing Trailing Arms
- Mazdatrix SpeedSource Rear Subframe Bushings
- Rx8Performance Rear Differential Bushings
- Powerflex Lower Control Arm Bushings
- Powerflex Upper Control Arm Bushings
- Power Flex Traction Rod Bushings
Wheels
- Garageline 25mm Wheel Spacers
- Mazda OE 18"x8" Alloy Wheels Powder Coated Gloss Black
- MazdaSpeed Rotary Center Caps
- BFGoodrich G-force T/A KDW 2 245/35/18
Last edited by Carbon8; 11-26-2015 at 04:28 PM.
The following users liked this post:
realrube (02-27-2020)
#3
Considerable Note Reaffirmation
This car is not being sold to your typical fashion consumer, it is not driven towards a DD, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like I have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. If you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
This car is not being sold to your typical fashion consumer, it is not driven towards a DD, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like I have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. If you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
Last edited by Carbon8; 09-04-2015 at 11:01 AM.
#4
Senior Member
Considerable Note Reaffirmation
This car is not being sold to your typical fashion consumer, it is not driven towards a DD, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like I have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. If you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
This car is not being sold to your typical fashion consumer, it is not driven towards a DD, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like I have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. If you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
Yes, I know I am a douchebag that just violated this rule, but you know.....
#7
Senior Member
WHY WON'T IT READ!!!!
considerable note reaffirmation
this car is not being sold to your typical fashion consumer, it is not driven towards a dd, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like i have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. if you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
this car is not being sold to your typical fashion consumer, it is not driven towards a dd, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like i have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. if you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
trolololololololo!
Last edited by badinfluence; 10-12-2015 at 02:35 PM.
#9
Thanks, No idea why my images are expiring Im working to get them back up
If you install the OE exhaust (header/Cat which is included in the sale) then yes it will pass 50 states emissions and inspections
Recently pulled the trigger on a 2015 AMG C63s Edition 1 that I am looking to build for a summer car. Also just picked up a 2015 Ram Rebel, and a 2014 Daytona 675r.
Needless to say I just do not have time for this anymore, but if it does not sell before the addition on my garage is finished its getting gutted and built again from the bottom up.
Needless to say I just do not have time for this anymore, but if it does not sell before the addition on my garage is finished its getting gutted and built again from the bottom up.
#10
You gonna eat that?
iTrader: (1)
Royals beat Toronto and David Price 6-3 on a picture perfect Fall day.
On to Toronto!
#11
Is this car still currently for sale? I am very impressed with the build and the parts involved. I fully appreciate the amount of work that has gone into the car and am interested in purchasing it. Just for your information, I have had 4 Rx7's and Just sold My 911 and am looking for a DE/Pure Driving enjoyment car...My only issue is that the car is red. Please email or message me back with your lowest price if the car is still for sale..
#12
Is this car still currently for sale? I am very impressed with the build and the parts involved. I fully appreciate the amount of work that has gone into the car and am interested in purchasing it. Just for your information, I have had 4 Rx7's and Just sold My 911 and am looking for a DE/Pure Driving enjoyment car...My only issue is that the car is red. Please email or message me back with your lowest price if the car is still for sale..
#14
Senior Member
Is this car still currently for sale? I am very impressed with the build and the parts involved. I fully appreciate the amount of work that has gone into the car and am interested in purchasing it. Just for your information, I have had 4 Rx7's and Just sold My 911 and am looking for a DE/Pure Driving enjoyment car...My only issue is that the car is red. Please email or message me back with your lowest price if the car is still for sale..
Plastidip=red problem solved!
#15
Pettit SC Deal Added to Car.
https://www.rx8club.com/rx-8-parts-s...2/#post4726699
https://www.rx8club.com/rx-8-parts-s...2/#post4726699
#16
Carbon8's NA Built RX8
Feeler Sale
https://www.rx8club.com/series-i-maj...-build-242275/
Considerable Note
This car is not being sold to your typical fashion consumer, it is not driven towards a DD, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like I have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. If you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
Car is now 1 of 4 that I own and I do not share the same passion and excitement for it that I once did. I still love everything about this car and the reasons that I purchased this car were to build, learn, and develop my engineering and analytical skills during the build. A lot of money, but more so time has been invested into every detail of this build which has been captivated a 26 page build thread with the home page listed below.
Car is being sold for $14000 OBO, but at the same time I reserve the right to not let the car go, as I could still see myself continuing this journey at a later point in my life years down the road. Will entertain serious offers not low ballers.
Please note car is being sold NA only with all parts listed below, the Pettit SC kit will be sold individually at a later date. Please reach out to me with any questions or comments.
*Pettit SC listed for Sale, will include with the purchase of this car for $4,000.
https://www.rx8club.com/rx-8-parts-s...2/#post4726699
Please call or email Ryan with any questions (716)3612410, Kpower@exactmm.com.
-------------------------------------------------Table Of Contents-------------------------------------------------
Post 2 Engine Removal and Engine Bay Strip
Post 3 Engine Bay Paint and Pettit Motor
Post 4 LIM Disassembly
Post 45 LIM VDI/SSV Cleaning
Post 69 Engine Bay and Short Block Assembly Start
Post 119 Short Block Assembly Cont
Post 129 Engine and Bay Assembled
Post144 Engine and Supporting Modifications Install
Post145 Engine and Supporting Modifications Install Cont
Post 223 Engine First Start
Post 230 AutoExe Steering Wheel and Gauge Install
Post 297 Dyno (7/28/13)
Post 303 Dyno Misfire
Post 313 Fouled Plugs and Premix Case
Post 324 R1Concepts Brake Install
Post 327 Porosity Tab Idle
Post 357 More Misfires With Fouled Plugs and Oil Test Report (08/6/13)
Post 377 Coil Dwell Misfire Related
Post 464 Engine Compression Test
Post 514 Chassis Restoration Start
Post 530 Chassis Stripped
Post 537 Engine Compression Test Normalized
Post 538 Engine Oil Test (01/10/14)
Post 547 Injector Cleaning
Post 548 Bolt Restoration DIY (Black Oxide)
Post 549 Chassis Assembly
Post 554 Engine Install Bottom
Post 570 Chassis/Suspension Build Complete
Post 606 BHR Long Tube Header Install
Post 613 BHR Long Tube Header Dyno
Post 618 Fire Extinguisher Install
Originally Purchased March 3rd 2012
Last On Road (6/16/14)
Engine Bay
Interior
Current Diagnostic Data
Normalized Compression Results (01/29/14
Rotor 1
Rotor 2
Engine Oil Test (03/15/15)
Dyno; Black is before BHR header, Red is all Mods(3/19/15)
Coilover Dyno Plot Top Front, Bottom Rear(2/10/15)
----------------------------------------------------Modifications----------------------------------------------------
Brakes
Drivetrain
Engine Management
Exhaust/ Intake
Exterior
Fluids
Gauges
Interior
Safety Equipment
Suspension
Wheels
Feeler Sale
https://www.rx8club.com/series-i-maj...-build-242275/
Considerable Note
This car is not being sold to your typical fashion consumer, it is not driven towards a DD, or an entry hobbyist. This car is selling above value for what it is and whats invested into as well as a slew of one off and very rare parts added to the sale. This is for the most part a turn key race/track car that would only need to have the interior stripped. I do not want to sell this car to some undeserving 20 year old kid who will not appreciate and care for this car like I have. I do not want to hear about the price or any other slander if you feel that way then you are not the person this ad is for. If you appreciate this car and the work for what it is and are serious about purchasing than contact me for details and discussion about specifics including price which can be negotiated.
Car is now 1 of 4 that I own and I do not share the same passion and excitement for it that I once did. I still love everything about this car and the reasons that I purchased this car were to build, learn, and develop my engineering and analytical skills during the build. A lot of money, but more so time has been invested into every detail of this build which has been captivated a 26 page build thread with the home page listed below.
Car is being sold for $14000 OBO, but at the same time I reserve the right to not let the car go, as I could still see myself continuing this journey at a later point in my life years down the road. Will entertain serious offers not low ballers.
Please note car is being sold NA only with all parts listed below, the Pettit SC kit will be sold individually at a later date. Please reach out to me with any questions or comments.
*Pettit SC listed for Sale, will include with the purchase of this car for $4,000.
https://www.rx8club.com/rx-8-parts-s...2/#post4726699
Please call or email Ryan with any questions (716)3612410, Kpower@exactmm.com.
-------------------------------------------------Table Of Contents-------------------------------------------------
Post 2 Engine Removal and Engine Bay Strip
Post 3 Engine Bay Paint and Pettit Motor
Post 4 LIM Disassembly
Post 45 LIM VDI/SSV Cleaning
Post 69 Engine Bay and Short Block Assembly Start
Post 119 Short Block Assembly Cont
Post 129 Engine and Bay Assembled
Post144 Engine and Supporting Modifications Install
Post145 Engine and Supporting Modifications Install Cont
Post 223 Engine First Start
Post 230 AutoExe Steering Wheel and Gauge Install
Post 297 Dyno (7/28/13)
Post 303 Dyno Misfire
Post 313 Fouled Plugs and Premix Case
Post 324 R1Concepts Brake Install
Post 327 Porosity Tab Idle
Post 357 More Misfires With Fouled Plugs and Oil Test Report (08/6/13)
Post 377 Coil Dwell Misfire Related
Post 464 Engine Compression Test
Post 514 Chassis Restoration Start
Post 530 Chassis Stripped
Post 537 Engine Compression Test Normalized
Post 538 Engine Oil Test (01/10/14)
Post 547 Injector Cleaning
Post 548 Bolt Restoration DIY (Black Oxide)
Post 549 Chassis Assembly
Post 554 Engine Install Bottom
Post 570 Chassis/Suspension Build Complete
Post 606 BHR Long Tube Header Install
Post 613 BHR Long Tube Header Dyno
Post 618 Fire Extinguisher Install
Originally Purchased March 3rd 2012
Last On Road (6/16/14)
Engine Bay
Interior
Current Diagnostic Data
Normalized Compression Results (01/29/14
Rotor 1
Rotor 2
Engine Oil Test (03/15/15)
Dyno; Black is before BHR header, Red is all Mods(3/19/15)
Coilover Dyno Plot Top Front, Bottom Rear(2/10/15)
----------------------------------------------------Modifications----------------------------------------------------
Brakes
- Eddlebrock SS Brake Lines
- Hawk HPS Brake PAds
- R1 Concepts Drilled and Slotted Rotors
Drivetrain
- Pettit Racing Street Ported 13B RENESIS W/ FD 3mm 2 Piece Apex Seals and Proprietary Oil and Cooling Jacket Modifications
- BHR Ignition Kit
- Supernow Underdrive Pulley Kit
- ACT HDSS Clutch
- ACT Prolight Flywheel
- Clutch Reinforcement Bracket
- Rx8Performance Oil Coolers and Line W/ External Tstat@175C
- Mazmart High Pressure Oil Regulator
- Greddy Oil Pan
- Raceroots Oil Filter Relocation
- SOHN Adapter
- Mazmart Water Pump and Tstat
- Ron Davis Radiator
- FAL 440 Cooling Fans
- Mishimoto Upper and Lower Radiator Hose
- Autobahn88 Radiator hose
- Series 2 Transmission
- S2 Short Shifter
- Eddlebrock SS Clutch Line
- Raceroots Syncro Saver
- S2 Starter
- Gates Racing Belts
- Racing Beat Condenser and Oil Cooler Screens
- Rx8Performance Motor Mounts
- Rx8Performance Trio Canister (SOHN, Catch Can, Washer Fluid)
Engine Management
- Cobb AP Pro Tune
Exhaust/ Intake
- AEM/MS CAI
- BHR Long Tube Header
- BHR Resonated Long Tube Header Midpipe
- ExoticSpeed R2-Titan Catback
Exterior
- 5% Tint
- Stealth Markers
- LED Parking,Tail, Marker, License Plate Bulbs
- EFX Exotic Red Hi,Low,Fog HID Conversion
Fluids
- ATE Super Blue Racing Brake Fluid
- Redline MT-90 GL-4 Transmission Fluid
- Redline 75W90 GL-5 Differential Fluid
- FL-22 Mazda Coolant
- Mobile 0W-40 Engine Oil
- Protek-R Premix and SOHN FLuid
- S2 Oil Filter
Gauges
- Wideband A/F
- Fuel Pressure
- Boost/Vacuum
- Oil Temperature
- Oil Pressure
- Water Temperature
- Racing Beat Water Temperature Adapter
- Aeromotive Fuel Line Adapter
- Lotek Dash Gauge Pod
- Racing Beat Lower Gauge Pod
Interior
- AutoExe Steering Wheel
- Pioneer Appradio 2
- Metra 95-7510HG Dash Kit
- Metra Axxess ASWC Steering Wheel Integration
- PLX WIFI OBD2 Dongle
- Rx8Performance OBD Relocation Bracket
- Steeda Performance OBD No Flash Cover
- Embroidered Floot Mats
- Redline Leather Shift Boot
- Red Ambient Light Kit
Safety Equipment
- H3R Performance Haltron 2.5lb Extinguisher
Suspension
- BC BR 8K/10K Coilovers
- Progress Tech Front and Rear Sway Bars
- Power Grid Front and Rear End Links
- MazdaSpeed Front Strut Support With Brake Boost Brace
- Beatrush Rear Strut Support
- Megan Racing Camber Arms
- Megan Racing Lateral Arms
- Megan Racing Toe Arms
- Megan Racing Traction Rods
- Megan Racing Trailing Arms
- Mazdatrix SpeedSource Rear Subframe Bushings
- Rx8Performance Rear Differential Bushings
- Powerflex Lower Control Arm Bushings
- Powerflex Upper Control Arm Bushings
- Power Flex Traction Rod Bushings
Wheels
- Garageline 25mm Wheel Spacers
- Mazda OE 18"x8" Alloy Wheels Powder Coated Gloss Black
- MazdaSpeed Rotary Center Caps
- BFGoodrich G-force T/A KDW 2 245/35/18