Loose Shifter?
#1
Loose Shifter?
So actually I've noticed this quite a while, well ever since I bought the car.
Does any of ya'll shifters wiggle around and the **** kinda rotate with the stick? And could you guys pull out the shifter as a whole?
I'm not really sure if this is my car's problem but I remember when I was test driving the 09s R3, it was nothing like mine.
Not really a concern, but I'd just like to know if there's anything wrong with it.
I'll try to get a video up cuz I know my words isn't quite self-explanatory.
Does any of ya'll shifters wiggle around and the **** kinda rotate with the stick? And could you guys pull out the shifter as a whole?
I'm not really sure if this is my car's problem but I remember when I was test driving the 09s R3, it was nothing like mine.
Not really a concern, but I'd just like to know if there's anything wrong with it.
I'll try to get a video up cuz I know my words isn't quite self-explanatory.
#2
Modulated Moderator
iTrader: (3)
Is it noisy as well? If it is...the bushing on the end of the shifter leaver is likely either loose or gone
Easy to check..just pull off the cover plate..remove the rubber cover...the small 10mm bolts holding on the shifter retaining ring and pull the shifter out and look at it
Easy to check..just pull off the cover plate..remove the rubber cover...the small 10mm bolts holding on the shifter retaining ring and pull the shifter out and look at it
#4
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
Errr....this concerns me. This makes it sound like either the plastic cup to the shifter is missing or cracked or that the metal top plate that holds the shifter in is missing. You should have no play coming upward on your shifter.
And we are talking about a MT car...right?
And we are talking about a MT car...right?
#7
Modulated Moderator
iTrader: (3)
Pull the console off..and have a look..if the retaining bolts are loose..the shifter will come up and down...
Likely they will be missing if that is the case....does your car have a stock shifter ot an Axilflow SS>
The rotating thing could just be the **** Does it go into reverse easily? If it is loose, the interlock would likely be difficult to use...
Likely they will be missing if that is the case....does your car have a stock shifter ot an Axilflow SS>
The rotating thing could just be the **** Does it go into reverse easily? If it is loose, the interlock would likely be difficult to use...
#8
Yea, i'm gonna try and look at that today^
but stock or short shifter, i don't really know, i suspect the previous owner kinda cut the stock shifter, cuz it's not quite the length of a stock shifter nor a axielflow length
nope, the rotating thing's definitely not the ****, the stick itself rotates with the ****
but stock or short shifter, i don't really know, i suspect the previous owner kinda cut the stock shifter, cuz it's not quite the length of a stock shifter nor a axielflow length
nope, the rotating thing's definitely not the ****, the stick itself rotates with the ****
#12
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
Lucky for you I have the same shift ****. I want to say that the bottom of the shift **** is level with the top bevel around the shift boot with an OEM shifter. With the AFE I was able 1/2" or so into the boot.
#13
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
So it is a little higher than the bevel but not much...maybe 1/2" or less. I took pictures but they refuse to get delivered or uploaded from my phone. Got somewhere I can MMS them to?
#21
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
Why are you so scared to look at your car and see what is actually wrong? You knew what...a week ago...that something was wrong with your car? Are you really that afraid of 5 little clips and a hunk of rubber?
#22
Extraordinary Engineering
Wow, I've never heard of the shifter breaking... other than the cup at the bottom... but that wouldn't make the whole assembly twist.
I think that the stock shifter has a rubber isolation in the middle of the stick so maybe this piece has broken free? That would explain what you're experiencing.
Once you're in there maybe put in an AFE SS?
Don't worry: This is a very easy part of the car to work on!
I think that the stock shifter has a rubber isolation in the middle of the stick so maybe this piece has broken free? That would explain what you're experiencing.
Once you're in there maybe put in an AFE SS?
Don't worry: This is a very easy part of the car to work on!
#23
lol nah... i just didn't really have time to. Plus I don't have a garage like most of you guys But yeah, I'll have time today, gonna take some pics and see WTF's up!?!, and nah lol I've been noticing this problem the first day I bought the car. uh... 4/18/09 lol
#24
The devil made me do it
iTrader: (1)
Join Date: Jul 2007
Location: Colorado Springs, CO
Posts: 3,708
Likes: 0
Received 2 Likes
on
2 Posts
You don't need a garage...heck I could swap out a shifter at a stop light...and I'm not overly mechanically inclined. Hopefully you haven't damaged your tranny somehow for running that way for so long.
#25
hm pulled the bitch out today and found the problem.
Seems normal right? hm
Nope... bet you've never seen anything like that huh! lol
so yea, the shifter head's kinda stuck and it's kinda broken off with the shifter itself
You have no idea how hard it is to pull that head out of the plastic.
Hm... so as annoying as it is, I'm just gonna bite the bullet and get a AF SS, I tried hammering that bitch back down into the shifter, but it seems like some kinda thread or head was broken off before, so urgh. Another $280 gone from my RX-8 fund
Seems normal right? hm
Nope... bet you've never seen anything like that huh! lol
so yea, the shifter head's kinda stuck and it's kinda broken off with the shifter itself
You have no idea how hard it is to pull that head out of the plastic.
Hm... so as annoying as it is, I'm just gonna bite the bullet and get a AF SS, I tried hammering that bitch back down into the shifter, but it seems like some kinda thread or head was broken off before, so urgh. Another $280 gone from my RX-8 fund
Last edited by dezau; 10-14-2010 at 03:00 PM.