Just installed BHR ignition kit
#1
the giant tastetickles
Thread Starter
Join Date: Sep 2005
Location: in the basement
Posts: 2,758
Likes: 0
Received 0 Likes
on
0 Posts
Just installed BHR ignition kit
Spent about 4 hours in total installing it, took my sweet time cleaning up everything that I removed to get to the coils. It was really tough to screw those 4 bolts back on, they are right under the coil end of the plug wires. I still have some issues though:
1. Is the MSD plug wires supposed to cover the whole spark plug (not leaving the white part visible)? I got the "click' when I attach wires to the plugs but im still seeing white.
2. The engine hoist hook. If i were to remove it completely, do I simply re-tighten the bolts all the way in or should i use some washers to get the same thickness as the hoist hook.
1. Is the MSD plug wires supposed to cover the whole spark plug (not leaving the white part visible)? I got the "click' when I attach wires to the plugs but im still seeing white.
2. The engine hoist hook. If i were to remove it completely, do I simply re-tighten the bolts all the way in or should i use some washers to get the same thickness as the hoist hook.
#3
Grasshopper
iTrader: (1)
If you got the "click", then you should be good.
You can give it a light tug to see if it slips off the plug, but you're probably fine.
Then screw the bolts back in... no need for washers.
#4
Registered
Join Date: Sep 2008
Location: Fort Meade, MD
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
I didnt order the BHR ignition kit but i just put on my new BHR wires to fit OEM coils, and it also shows some of the white, but it drives perfect.
So im assuming it wont cause a problem? and thats the way it was supposed to be.
So im assuming it wont cause a problem? and thats the way it was supposed to be.
Thread
Thread Starter
Forum
Replies
Last Post
{ FS } BHR ignition kit and coils
RotisserieEngine
RX-8 Parts For Sale/Wanted
21
01-12-2017 10:12 PM
tigg.z
New Member Forum
0
08-26-2015 09:51 PM