17x9 Cobra SVT Wheels
#1
Registered
Thread Starter
17x9 Cobra SVT Wheels
Just and FYI to anyone looking. These 2000ish Ford Mustang Cobra SVT Wheels are can be had for cheap. I got these for $100 and they are forged one-piece and relatively light for 17x9. I put 255/40's all the way around. If I was going to be picky, I would say the fronts should move in 5mm and the rear should move out 5mm. I plan to poweder coat them a little darker than the paint once I tint the windows.
The following users liked this post:
jamezmazda (04-19-2020)
#4
FULLY SEMI AUTOMATIC
iTrader: (9)
pretty sure j#s ran rustang wheels for a while
#7
Registered
Thread Starter
I am pretty sure they are around 20lbs each, so not super light, but lighter than the chrome version. Upside is that they are super strong for the potholes found during the daily drive. The offset is 24mm and the car is adjusted down about 1.5" with coil-overs. I think the picture with the measurement was taken during my height adjustment. The final gap was about 1.75" between the top of the wheel and the fender.
Either way, I am sure I am not the first or only one to run these. Thanks for the comments.
Either way, I am sure I am not the first or only one to run these. Thanks for the comments.
#8
Registered
iTrader: (25)
Page down to the OEM wheel section:
https://www.stangnet.com/mustang-for....285393/page-4
i assumed 2003, 2004 slightly different color and 23.8#
.
https://www.stangnet.com/mustang-for....285393/page-4
i assumed 2003, 2004 slightly different color and 23.8#
.
#9
FULLY SEMI AUTOMATIC
iTrader: (9)
doesnt look bad op, now just get rid of the fugly front plate
Thread
Thread Starter
Forum
Replies
Last Post