3D print parts
#1
Registered
Thread Starter
3D print parts
The aim is to gather a useful archive for 3d printing parts.
I have seen many times original files developed and made by a user and later others remixed and published the part not only with no credit but even selling it.
Disclaimer, all files are linked to the originally published site which followed its policy for copyright protection.
DO NOT upload direct files here or link a 3rd party server unless you are the original designer / lawful licence holder.
I have seen many times original files developed and made by a user and later others remixed and published the part not only with no credit but even selling it.
Disclaimer, all files are linked to the originally published site which followed its policy for copyright protection.
DO NOT upload direct files here or link a 3rd party server unless you are the original designer / lawful licence holder.
The following 2 users liked this post by motodenta:
BigCajun (04-23-2024),
fruitspunch (04-28-2024)
The following users liked this post:
Fickert (09-18-2024)
#5
Registered
Thread Starter
RX8 Gauge pod Vent
https://www.thingiverse.com/thing:5341407
My favourite vent mount gauge pod, as the OG photos are not clear I use my photo. It turn 360.
The following users liked this post:
Fickert (09-18-2024)
The following users liked this post:
BigCajun (04-24-2024)
#15
@motodenta any designs for ram air scoop? I was thinking about opening top of the front bumper - cut the square out and make it removable (like a mini hood) when on track to have straight path into airbox. What I am missing is custom made ram scoop that could fit in there to collect and direct the air straight into airbox?
Our local library has 3d printer I just need design for the scoop that would fit in that space and connect with airbox mouth.
something like this:
Our local library has 3d printer I just need design for the scoop that would fit in that space and connect with airbox mouth.
something like this:
Last edited by Nadrealista; 04-24-2024 at 08:53 AM.
#16
You gonna eat that?
iTrader: (1)
Thanks.
#17
Registered
Thread Starter
@motodenta any designs for ram air scoop? I was thinking about opening top of the front bumper - cut the square out and make it removable (like a mini hood) when on track to have straight path into airbox. What I am missing is custom made ram scoop that could fit in there to collect and direct the air straight into airbox?
Our local library has 3d printer I just need design for the scoop that would fit in that space and connect with airbox mouth.
Our local library has 3d printer I just need design for the scoop that would fit in that space and connect with airbox mouth.
Yes potentially I (or someone else) can do it after half a bottle of whisky and and hours.
Printing is the hard part, as it is better to make from flexible/ish materials like ABS/ ASA or even better with TPU with the right shore number, not just that it would take time if not use
fast printer. for example, the printing time on my Creality cr10s printer is 26min for a job while the same setting with the same setting would print on my Bambu lab x1carbon in 6min.
Considering you can source similar par out the shelf. Also don't forget the bottle neck of intake if somewhere els IMO.
#18
You gonna eat that?
iTrader: (1)
I was trying to find a way to keep my big 6D Maglite/club/Striker secure without drilling new holes or glue.
If any one can find one, or figure out a way to hook a hanger into the plastic seam, that would be cool.
Could also maybe make them for pistols or other device holders.
If any one can find one, or figure out a way to hook a hanger into the plastic seam, that would be cool.
Could also maybe make them for pistols or other device holders.
#20
You gonna eat that?
iTrader: (1)
I am in the market for SSR wheels center caps.
$220 is a little steep for genuine SSRs, so I wondered if anyone made 3D printed custom ones when I ran across this site that sells downloads.
I didn't get deep into it, but if there are some, I saw there are stickers made for center caps.
https://m.yeggi.com/q/mazda+center+cap/8/
$220 is a little steep for genuine SSRs, so I wondered if anyone made 3D printed custom ones when I ran across this site that sells downloads.
I didn't get deep into it, but if there are some, I saw there are stickers made for center caps.
https://m.yeggi.com/q/mazda+center+cap/8/
Last edited by BigCajun; 05-06-2024 at 09:17 AM.
#21
Registered
Thread Starter
#22
Registered
Thread Starter
I am in the market for SSR wheels center caps.
$220 is a little steep for genuine SSRs, so I wondered if anyone made 3D printed custom ones when I ran across this site that sells downloads.
I didn't get deep into it, but if there are some, I saw there are stickers made for center caps.
https://m.yeggi.com/q/mazda+center+cap/8/
$220 is a little steep for genuine SSRs, so I wondered if anyone made 3D printed custom ones when I ran across this site that sells downloads.
I didn't get deep into it, but if there are some, I saw there are stickers made for center caps.
https://m.yeggi.com/q/mazda+center+cap/8/
https://rx8club.com/series-i-do-your...-photos-13147/
#24
You gonna eat that?
iTrader: (1)
What are you looking for is not 3d printed, they are "Domed Stickers Gel" which is plenty on the market with reasonable pieces.
https://rx8club.com/series-i-do-your...-photos-13147/
https://rx8club.com/series-i-do-your...-photos-13147/
#25
You gonna eat that?
iTrader: (1)
That's the idea, but I'm not crazy about the raised emblem.
If there are plain ones, I'd prefer that, but either made in black or I'd paint them.