CE28N Rim
#1
CE28N Rim
Wanted to order CE28N Rim for my Yellow 8, Any advice?
1. Should go for 18" or 19"?
2. What colour suit Yellow? How about Bronze?
3. What should be the offset (Rear & Front)?
4. Any one know the price range? Yap Bro quote S$790/- per pc.
Thx
1. Should go for 18" or 19"?
2. What colour suit Yellow? How about Bronze?
3. What should be the offset (Rear & Front)?
4. Any one know the price range? Yap Bro quote S$790/- per pc.
Thx
#2
HI
18" or 19" up to u. For me 19" of course to look good.
White rims will look good with yellow. Bronze good for black, white car. Maybe can consider something like Prodrive British Black colour oso.
Offset depends on whether u want to get after mkt brake calipers in the future or not. If u are getting, then make sure u know what u are going to buy so u can get proper offset. So what is proper?? If the tyre/rim shop cannot tell u, dont buy from them!!
U oredi know the price and it wont vary too much from wat u are quoted. Maybe around $750 for 18" is prob best price liao.
18" or 19" up to u. For me 19" of course to look good.
White rims will look good with yellow. Bronze good for black, white car. Maybe can consider something like Prodrive British Black colour oso.
Offset depends on whether u want to get after mkt brake calipers in the future or not. If u are getting, then make sure u know what u are going to buy so u can get proper offset. So what is proper?? If the tyre/rim shop cannot tell u, dont buy from them!!
U oredi know the price and it wont vary too much from wat u are quoted. Maybe around $750 for 18" is prob best price liao.
#3
Black rims looks best on a yellow, bronze doesnt. IMO of course.
Check out East Moon's car.
https://www.rx8club.com/showthread.p...highlight=east
Check out East Moon's car.
https://www.rx8club.com/showthread.p...highlight=east
Last edited by jaii13; 02-09-2006 at 09:06 AM.
#4
Yes, black/gun metal looks best on yellow IMO. Bronze is not a nice colour for yellow, makes the whole car look yellow. 18" or 19" up to you, but bear in mind that 19" will not only significantly UP the price (rims and tires), but also affect performance due to the increase in unsprung weight.
#6
Originally Posted by Yellow Cab
Wanted to order CE28N Rim for my Yellow 8, Any advice?
1. Should go for 18" or 19"?
2. What colour suit Yellow? How about Bronze?
3. What should be the offset (Rear & Front)?
4. Any one know the price range? Yap Bro quote S$790/- per pc.
Thx
1. Should go for 18" or 19"?
2. What colour suit Yellow? How about Bronze?
3. What should be the offset (Rear & Front)?
4. Any one know the price range? Yap Bro quote S$790/- per pc.
Thx
IMO, black, gold and even silver multi spoke wheel dun look good on a yellow...
#8
Originally Posted by CoupeM
prodrive british black is a nice colour...abit like gunmetal but not gunmetal
#9
Most wheel/tire shops don't keep ex-stock for the Prodrive GC-010 with the proper offset for our 8s coz our offsets are quite big. I feel that if I'm gonna spend $750 per rim for a set of Prodrives, I would rather wait and get the proper offset than compromise for ex-stock that can fit but wrong offset.
#12
Originally Posted by Yellow Cab
Hi, CoupeM. Is this the one that you are talking about? prodrive british black CG10? Any ideal $ for 18"? Who have ex-stock?
Go check with South East tyres. 18" is abt $750 but offset u got to be sure wat u want. Nice rims ! but mi Racing Hart deep dish oso not bad hehehehe
#13
Originally Posted by EBS
Go check with South East tyres. 18" is abt $750 but offset u got to be sure wat u want. Nice rims ! but mi Racing Hart deep dish oso not bad hehehehe
Reg. the offset, anyone can enlighted me, what factors ditermine the offset?
CoupeM, is that your car on Hot Stuff Front Page?
#14
If u dont intend to change to larger braker calipers, stick the the original offset from factory. If u want to change calipers next time (bigger than original) and u have the original factory offset, the rims may not fit properly. Some shop will recommend spacers, an dd on piece so the rim can clear the brakes but personally I'll avoid this.
So when changing rims, pse ask urself if u want to change brake calipers in the future and get the proper offset to clear the calipers.
BTW calipers size oso vary depending on 4 pots, 6 pots, full racing 6 pots etc etc hehehe
So when changing rims, pse ask urself if u want to change brake calipers in the future and get the proper offset to clear the calipers.
BTW calipers size oso vary depending on 4 pots, 6 pots, full racing 6 pots etc etc hehehe
#15
Originally Posted by Yellow Cab
Did I get poison? Seems like need to switch from VR CE28N to Prodrive CG-10 british black. But need to say thank you for all the sounded advice and I totally agree is wise choice to switch.
Reg. the offset, anyone can enlighted me, what factors ditermine the offset?
CoupeM, is that your car on Hot Stuff Front Page?
Reg. the offset, anyone can enlighted me, what factors ditermine the offset?
CoupeM, is that your car on Hot Stuff Front Page?
#16
#18
Originally Posted by EBS
Hehe more for looks! Very happy with the attention but diff to go fast cos too heavy. 255/35 rear leh ....
u shld be on 8.5J front, and 9.5J rear. Front 235/40, Rear 255/35... rite?
Ur CXR is rear deep dish must be sipeh swee... i must see the real thing some day!!
#19
visited Yap Bro, quoted Prodrive GC010 British Black about S$860, good buy?
Yap also recommend to go for Greddy 6 Port Front Break, whole set (Rotors, break lines, pad and cil) cost S$2,800/-. Can't change the rear break due to the * design. Just need to pain it. Any commend? Initially looking for Endless.
Yap also recommend to go for Greddy 6 Port Front Break, whole set (Rotors, break lines, pad and cil) cost S$2,800/-. Can't change the rear break due to the * design. Just need to pain it. Any commend? Initially looking for Endless.
#23
Originally Posted by Yellow Cab
visited Yap Bro, quoted Prodrive GC010 British Black about S$860, good buy?
Yap also recommend to go for Greddy 6 Port Front Break, whole set (Rotors, break lines, pad and cil) cost S$2,800/-. Can't change the rear break due to the * design. Just need to pain it. Any commend? Initially looking for Endless.
Yap also recommend to go for Greddy 6 Port Front Break, whole set (Rotors, break lines, pad and cil) cost S$2,800/-. Can't change the rear break due to the * design. Just need to pain it. Any commend? Initially looking for Endless.
#24
I regard CE28N as classic rims, never go out of fashion type and boy, real light compared to many others. I put on mine straight away FC suffers, acceleration oso suffers hehehe
Used with wide tyres, at elast the weight increase with CE28 not so bad. Prodrive a bit heavier but I believe price shld be the same. Think both forged at Rays foundry so quality shldnt differ much.
Used with wide tyres, at elast the weight increase with CE28 not so bad. Prodrive a bit heavier but I believe price shld be the same. Think both forged at Rays foundry so quality shldnt differ much.
#25
EBS bro, I don't understand how FC and acceleration suffers with lighter rims (assuming same tires). However, if you use wider tyres then naturally the higher FC and higher rolling resistance is to be expected. In any case, wider tyres are not necessarily heavier than narrower tyres as composition and design of the tyres will affect it's weight. Prodrive rims are also not necessarily heavier, depends on the model.