1 Attachment(s)
Originally Posted by LionZoo
(Post 4181830)
This isn't anything against you Adam since we know you don't have control over manufacturing, but...
So on 1/11, they reported that the cutting process was about to begin. Now, almost a month later they just reported getting some materials and are about to begin manufacturing. Basically, there was no progress for a month. I misunderstood what they meant by cutting. Those were the models. Testers. They tested for clearances with plastic cut models. Also they are perfectionists there...and this is why its taking longer. This is indeed good and bad... Attachment 236624
Originally Posted by vcoil
(Post 4183175)
I just hope they'll provide spare parts (i.e. rotors) quickly/immediately in the future because if not actually this will be a not so good deal.
I hope they planned at least a 5 years support for spares. Sorry but presently some doubt is raising... Bye I know everyone is waiting and its tough...I will be asking to see if they can do anything for us to speed things up. |
Mars is comming up soon and I need to start working on my car soon.
Any real ETA? |
Originally Posted by fastlaneracing
(Post 4184392)
Mars is comming up soon and I need to start working on my car soon.
Any real ETA? -Adam |
2 Attachment(s)
(11:21:47 AM) girodisc martin: this is showing us inspect the hat for runout
(11:21:49 AM) Adam K: that is awesome (11:22:09 AM) girodisc martin: the needle is measuring tenths as in .0001" (11:22:33 AM) girodisc martin: it measures about .00015" runout (11:22:37 AM) girodisc martin: that's f'ing flat (11:22:49 AM) Adam K: that is precision (11:23:22 AM) girodisc martin: it's amazing, we used to actually grind the front hats on the evo x because the machine shop we used just couldn't get them flat (11:23:54 AM) girodisc martin: now, because we actually took the time to figure out how to do it right, they are all this flat (11:24:14 AM) girodisc martin: bringing the equipment in house was the best thing we ever did (11:25:20 AM) girodisc martin: for ref (11:25:31 AM) girodisc martin: .002" is max allowable runout of a rotor (11:26:03 AM) Adam K: I like it a lot (11:26:20 AM) girodisc martin: we'll have the front proto a little later in the day (11:26:34 AM) girodisc martin: rotor rings arrived yesterday so we can cut them in the coming days (11:27:35 AM) Adam K: yesss!!! (11:27:43 AM) Adam K: as soon as humanly possible (11:28:10 AM) Adam K: so are these the most perfect hats you ever made? (11:28:35 AM) girodisc martin: well (11:28:55 AM) girodisc martin: we had one hat that the needle didn't move :-) (11:29:04 AM) girodisc martin: but these are damn good (11:29:22 AM) girodisc martin: they are small in diameter, and have some section to them, so that helps (11:30:13 AM) girodisc martin: the big hats for 15 and 16" rotors are harder for sure (11:30:25 AM) girodisc martin: we are happy to see .0005-.0007" with those (11:33:13 AM) Adam K: I love the precision and craftsmanship sir! (11:33:17 AM) Adam K: keep up the good work! (11:33:33 AM) girodisc martin: we try :-D Attachment 236555 Attachment 236556 |
Awesome!
|
Hi Adam, if you can pass this post along to Girodisc to make sure that they don't make the same mistake, it would be great. https://www.rx8club.com/showpost.php...8&postcount=80 Thanks.
|
Originally Posted by LionZoo
(Post 4186407)
Hi Adam, if you can pass this post along to Girodisc to make sure that they don't make the same mistake, it would be great. https://www.rx8club.com/showpost.php...8&postcount=80 Thanks.
but I will pass it along. -Adam |
Straight from Girodisc:
Adam, Martin took a look at those, he said those rotors were actually made in Taiwan. He said he’s aware of that issue and that our rotors will have no issues clearing the calipers. Thanks for the heads up though, it is much appreciated! Jess Kenoyer 1971 Midway Lane, suite G Bellingham, WA US 360.306.3263 |
They even know where the competitors manufacture their products...
The wait is suddenly waaay less annoying! |
Originally Posted by bse50
(Post 4186641)
They even know where the competitors manufacture their products...
The wait is suddenly waaay less annoying! |
1 Attachment(s)
OMG UPDATES!!!!!!!!!!!!!!!!!!
(12:36:02 PM) girodisc martin: rotor hats will prolly go on the mill later in the day and we'll have protos to fit. Then, full production should only take a few more days. Attachment 236408 |
Bumpity bump, news? :)
You also have a pm! |
Originally Posted by bse50
(Post 4189959)
Bumpity bump, news? :)
You also have a pm! |
|
I like the price on their website.... lol!
Thank you Adam! |
So when are we getting ours?
|
2 Attachment(s)
|
oooooh yeaaaaaaaaaa
|
Originally Posted by fastlaneracing
(Post 4191837)
So when are we getting ours?
+1 its time to give us an date, please. |
It's no longer freezing there? :)
|
Originally Posted by bse50
(Post 4198956)
It's no longer freezing there? :)
and my rex needs new brake disc's, my stock disc's is totally worn out and even have some small cracks... they have lived since 2004 and 3 seasons with track duty. I give the stock brakes A+ on the RX-8. But these girodisc looks soo nice and light weight! |
Adam returns from Vaca tomm, and he will be more than happy to update you guys :)
-Nick |
Looking forward! =)
And a reminder, dont forget to send my Hawk DTC60 pads together with my girodisc. (I never got an updated invoice showing my prepaid pads) |
Originally Posted by fastlaneracing
(Post 4199880)
Looking forward! =)
And a reminder, dont forget to send my Hawk DTC60 pads together with my girodisc. (I never got an updated invoice showing my prepaid pads) Your pads are already at GiroDisc waiting the completion so they can be put in the box with the rotors once shipped. Hey guys I am back. I will shoot over an inquery to see if we can get a possible ship date. |
Sweet!
|
All times are GMT -5. The time now is 02:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands