Now that we are finally direct with Greddy I thought I would give you an idea of all that Greddy offers. If interested and need any kind of details on a product please don't hesitate to PM me!!




Greddy SP2 Stainless Dual Exhaust RX8 03+

$574.00 Shipped



It wasn't easy to improve on the popular GReddy SP system. But through customer feedback from over 10 years of use and testing, GReddy redesigned the SP as a full stainless steel cat-back exhaust system that is similarly priced to the original SP system. The new SP2 features a 304 stainless steel muffler canister with extra strong 430 SS end caps that feature a deep, high polish. Large, high volume mufflers provide maximum flow with a deep, pleasing tone and are especially effective when used on vehicles with aftermarket turbocharger systems. The unique outer curled oval tip (115 x 110mm dia.) is embossed with the famous GReddy logo. Employing state-of-the-art robotic seam welding, the single wall canisters feature increased rigidity for maximum durability and life. With over 35 types of internal perforated tubes, each SP2 application is specifically tuned for the best combination of sound and performance. The new SP2 also features thick walled (1.5mm), polished 304 stainless steel mandrel bent piping for better resonance and vibration control and enhanced corrosion resistance and durability. New lightweight, flared and stamped stainless steel flanges are also used to provide improved sealing characteristics.

60mm piping

115x110mm tips

Dual Muffler Exhaust


--------------------------------------------------------------------------------------------------------




Greddy Pulley Kit Mazda RX8 03+

$136.00 Shipped



Parasitic drag decreases performance. By installing Greddy's lightweight, CNC Pulley Kits, power losses can be kept to a minimum. Ideal for tuned engines, theses kits look good and perform well.

Includes: Water pump pulley and alternator pulley.



--------------------------------------------------------------------------------------------------------




Greddy Grex Front Brake System Mazda RX8 03+

$2,315.00 Shipped



Backed by extensive research and development, GREX Brake Systems are designed as full competition-spec brake kits suitable for street use. Each application-specific GREX Brake System kit will work with a wide variety of wheels. Lightweight 4 and 6 piston aluminum calipers are designed to be as compact as possible and are stylishly protected by the Classic GREX Gold hard anodized finish. Large lightweight GREX Two-piece rotors use an anodized, duralumin bell housing to prevent rusting and scratching. The finest quality Earl's Teflon lined stainless braided brake hoses are also included for maximum performance and reliability.

Front Brake
Gold Calipers
6 Piston
330mm Rotors



--------------------------------------------------------------------------------------------------------






Greddy Front Strut Tower Bar Mazda RX8 03+

$118.00 Shipped



Suspension upgrades such as high performance springs, shocks and tires can add additional stress to the chassis resulting in additional chassis flex. Grex Strut Tower Braces improve chassis rigidity and reduce this flex. By using a monocoque aluminum triple tube shaft, high strength and rigidity are obtained without unecessary weight gain.




--------------------------------------------------------------------------------------------------------







Greddy Rear Strut Tower Bar Mazda RX8 03+

$118.00 Shipped








--------------------------------------------------------------------------------------------------------






Greddy Engine Oil Pan Mazda RX8 13B-MSP

$292.00 Shipped



Functional as a secondary oil cooler, Greddy high-capcity Oil Pans maintain more constant oil temperatures via increased volume of oil and the improved cooling efficiency of the thick-walled cast aluminum construction. They also include specialty-designed interiors to keep the oil at the oil pump pick-up for engine reliability.

Hi-cap, +600cc, baffles, ports.



--------------------------------------------------------------------------------------------------------




Greddy Air Diversion Panel Mazda RX8

$55.00 Shipped



Made from 1mm aluminum and embossed with the Greddy logo, our Air Diversion Panels are designed to not only improve the engine looks, but to contain airflow to the radiator core, thus improving cooling efficiency.





--------------------------------------------------------------------------------------------------------






Greddy Bolt-on Turbo Kit Mazda RX8

$3,200.00 Shipped



It takes a tremendous amount of money and time to successfully increase the power of a naturally aspirated engine. With a GReddy bolt-on turbocharger kit you can obtain instant horsepower gains with less time and money while still having the potential for upgrading. Unlike most turbo kits on the market today, GReddy kits are designed specifically for driveability and reliability, as well as performance. Since they are based completely on stock engines, these kits come with all the necessary basics, including fuel enrichment. Many of the kits are covered under CARB E.O. numbers which make them 50-state street legal. If competition use is your goal, there are many GReddy upgrades (intercoolers, blow-off valves, fuel management and boost controllers) to boost the power output even further.

Note: T618Z Turbo, intercooled type31, cast-mani, w/ plug-in emanage.






--------------------------------------------------------------------------------------------------------







Greddy Full Auto Turbo Timer

$84.00 Shipped



The basic function of a turbo timer is to allow the vehicle to idle the engine for a timed period, with the ignition key removed. This allows the engine oil and turbo center cartridge to cool down and prevent internal turbo damage. GReddy Full Auto Timers pack tons of features into one economical, compact unit. In addition to two standard programmable count down presets (P-1, P-2), the GReddy Full Auto Timer also has two auto timer modes (A-L, A-H). The modes estimate the driving RPM according to the vehicles alternator signal and then recommend a count down time. Also new are the stopwatch/lap time and attack modes along with a built in voltmeter and speedometer. Still standard are the optional parking brake and speedo safety hook-ups.

Note: Auto Timer, Volts, Attack, Stopwatch.







--------------------------------------------------------------------------------------------------------







Greddy Profec B II Boost Controller

$355.00 Shipped



GReddy's Profec B2 is the newest release of their electronic unit. This can be used on any car that is Turbocharged. The Profec B2 measures 1"x3.5" and mounts in the car and remotely operates a solenoid connected to the Wastegate. There is a Hi-Boost feature that can be activated in less than a 10th of a second with a remote steering wheel switch. This is very convenient for racing situations! The Profec B2 features a user programmable boost curve to help maintain smooth acceleration all the way up to redline. Installation varies from 1-3 Hours.

Parts Included with GReddy Profec B Spec 2
Compact Boost Display / Control Unit
Electronically Activated Solenoid
Electrical Wiring
Vacuum Line
Mounting Hardware
Installation Instructions








--------------------------------------------------------------------------------------------------------








Greddy Profec E-01 Boost Controller

$574.00 Shipped




GReddy's new super multi-tasker is the PRofec e-01. Designed as a combination: boost-controller, data display / logger and e-manage programmer, the e-01 can provide superior boost response, increased boost, warning meter functions, 3channel data-logging, and access to all the programming features provided with the latest e-manage support tool. Even when used as just a boost controller the e-01 has features to smooth out the boost curve. With both an Auto and Manual setting for both external and actuator style wastegates, the new PRofec can alter its new compact, high capacity solenoid valve via various RPM ranges if need be. The large LCD screen, with green elecro-illuminesant backlighting is easy to see. Other standard features includes two preset boost levels, a timed over-take boost and compatibility with our Remote Switching System. The data display can view 3 different data channels simultaneously; like Boost, RPM, or any other channel inputted by the emanage. The data can be logged up for 3hours on a SD card while also giving warning set points, and peak & hold values. (Some features require optional harness to be access)

Notes: Silver, also e-programmer.







--------------------------------------------------------------------------------------------------------








Greddy Gauges

$Prices Vary$



From 52mm to 60mm, from electric to manual. Greddy has the gauge for you. The complete line can be found HERE !!








--------------------------------------------------------------------------------------------------------

If you find a price that beats ours let me know and I will meet it!!!!!

 

Do you have the GRex brakes in stock?