Multi-model Dyno Day and Motorgen Meet February 21, 2009
#1
Multi-model Dyno Day and Motorgen Meet February 21, 2009
Hey everyone,
Instead of doing a cruise this month, we've decided to do a dyno day at Racers Edge Tuning on Saturday, February 21st. The plan is to be at the shop from 9a.m. to 5p.m. on the dyno, and then we will caravan over to our normal meeting spot at Nick's Burger in Fullerton for the meet between 6:00p.m. and 6:30p.m. The address for RET is:
Racers Edge Tuning
11434 Downey Ave Downey Ca 90241
562-445-7001
and the address for Nick's Burger is:
Nick's Burger
1712 W. Orangethorpe Ave
Fullerton, CA 92833
For the dyno day the shop can handle a maximum of 45 cars. The cost for the dyno is 3 pulls for $45. For all those planning on running their cars I am requiring everyone to register here. In order to register you must be a registered user on the site. Registration is extremely easy and should take you less than 45 seconds. If anybody has a problem signing up or registering please shoot me an email at SeanPlunk@gmail.com. For all those that sign up, please bring cash on the dyno day. Exact change is preferred as it allows the guys at RET to cycle through the cars faster and reduces down time.
I am really looking for a wide variety of different makes and models to keep things interesting, so please don't hesitate to sign up regardless of what you drive. Sorry to our AWD friends, but this dyno is only for FWD and RWD vehicles (if you want to stop by the shop and hang out though, we'd love to have you along). For all the participants we will be taping every car run. We will not only be taping the car itself, but we'll have a second camera on the computer monitor as it spits out the results. We'll cut the two sets of videos together after the meet and all the videos will be posted in our videos section afterwards.
At the shop we will provide some sodas and water. As far as lunch is concerned we haven't decided what we want to do yet, but I'm including a poll on the main thread here so please vote if you're coming and we'll make a decision in the next week or two.
We've had a lot of fun at the meets with a really wide variety of cars and all makes and models. We're looking for the same diversity for this, so I hope to see you all out there. Here and here are pictures from the last meet and here and here are videos from our last cruise. Whether you want to dyno or you just want to hang out with a bunch of cars guys, I hope to see you on Feb. 21st
Instead of doing a cruise this month, we've decided to do a dyno day at Racers Edge Tuning on Saturday, February 21st. The plan is to be at the shop from 9a.m. to 5p.m. on the dyno, and then we will caravan over to our normal meeting spot at Nick's Burger in Fullerton for the meet between 6:00p.m. and 6:30p.m. The address for RET is:
Racers Edge Tuning
11434 Downey Ave Downey Ca 90241
562-445-7001
and the address for Nick's Burger is:
Nick's Burger
1712 W. Orangethorpe Ave
Fullerton, CA 92833
For the dyno day the shop can handle a maximum of 45 cars. The cost for the dyno is 3 pulls for $45. For all those planning on running their cars I am requiring everyone to register here. In order to register you must be a registered user on the site. Registration is extremely easy and should take you less than 45 seconds. If anybody has a problem signing up or registering please shoot me an email at SeanPlunk@gmail.com. For all those that sign up, please bring cash on the dyno day. Exact change is preferred as it allows the guys at RET to cycle through the cars faster and reduces down time.
I am really looking for a wide variety of different makes and models to keep things interesting, so please don't hesitate to sign up regardless of what you drive. Sorry to our AWD friends, but this dyno is only for FWD and RWD vehicles (if you want to stop by the shop and hang out though, we'd love to have you along). For all the participants we will be taping every car run. We will not only be taping the car itself, but we'll have a second camera on the computer monitor as it spits out the results. We'll cut the two sets of videos together after the meet and all the videos will be posted in our videos section afterwards.
At the shop we will provide some sodas and water. As far as lunch is concerned we haven't decided what we want to do yet, but I'm including a poll on the main thread here so please vote if you're coming and we'll make a decision in the next week or two.
We've had a lot of fun at the meets with a really wide variety of cars and all makes and models. We're looking for the same diversity for this, so I hope to see you all out there. Here and here are pictures from the last meet and here and here are videos from our last cruise. Whether you want to dyno or you just want to hang out with a bunch of cars guys, I hope to see you on Feb. 21st
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#2
#4
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
I'd be curious to see your friend's 350z on the dyno also...
Oh, and we're probably going to do an AWD dyno in April if your friend with the WRX wants to put his on the rollers.
#5
RX8 & RX7 owner
saw the vid sorry looks like the V8'ers might be the kind to be like yeah yeah yeah ill smoke everyone, even though that suby and evo will kill them. Plus im RX8 all the way
#6
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#12
Super Bowl Sunday Bump! I have filled about 22 spots so far out of a total of 45. I expect to fill all the spots over the next 3 weeks![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
So far we have coming-
-3 Terminator Cobras
-A Blown Saleen Cobra
-An SRT8 Charger with Longtubes, etc
-A TurboBuick and a Toyota Truck with a TurboBuick Motor
-A Mercedes-Benz C55 AMG
-A MazdaSpeed 3
-A Silverado SS Truck
-A C5 Vette and an 82 Vette with a H/C LS1
-A 68 Camaro
-An 01 Lexus IS300 with a forged bottom end and turbos
-A built and blown 2003 Mach 1
-A Magnacharged Pontiac G8
-2 Pontiac Solstice GXP's
-A BMW 335i Coupe and Sedan and a BMW E39 540i
-A 600+ WHP SRT4
It's going to be a lot of fun and everyone who dyno's will get an awesome video. Here is a link to the event for anyone else that wants to sign up. I'll see you guys there!
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
So far we have coming-
-3 Terminator Cobras
-A Blown Saleen Cobra
-An SRT8 Charger with Longtubes, etc
-A TurboBuick and a Toyota Truck with a TurboBuick Motor
-A Mercedes-Benz C55 AMG
-A MazdaSpeed 3
-A Silverado SS Truck
-A C5 Vette and an 82 Vette with a H/C LS1
-A 68 Camaro
-An 01 Lexus IS300 with a forged bottom end and turbos
-A built and blown 2003 Mach 1
-A Magnacharged Pontiac G8
-2 Pontiac Solstice GXP's
-A BMW 335i Coupe and Sedan and a BMW E39 540i
-A 600+ WHP SRT4
It's going to be a lot of fun and everyone who dyno's will get an awesome video. Here is a link to the event for anyone else that wants to sign up. I'll see you guys there!
#13
Monday/Two week notice bump ![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Great variety so far, new additions include
-A Ford Lightning
-Volkswagen GTi with a big turbo
-An SRT4 Caliber
-Pontiac Firehawk
We still have about 15 spots left. I expect they will be filled by week's end, so please sign up if you're interested
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Great variety so far, new additions include
-A Ford Lightning
-Volkswagen GTi with a big turbo
-An SRT4 Caliber
-Pontiac Firehawk
We still have about 15 spots left. I expect they will be filled by week's end, so please sign up if you're interested
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#14
1 week bump. I talked to Greg last night and he's confident we can do 45 cars. I want to please remind everyone to bring cash and to bring exact change if possible. The cost is 3 pulls for $45. Also, if anyone has any folding chairs please bring them because we're going to have a lot of people and their aren't enough chairs in the shop :D
Here is the roster as of this morning:
-1 04 Cobra (pulley + intake + exhaust)
-1 07 BMW 335i
-1 96 Saleen with Cams and a blower
-1 03 Cobra (pulley + intake + exhaust)
-1 07 SRT8 Charger with LT's and Boltons
-1 87 TurboBuick with methanol and extra boost
-1 06 Mercedes Benz C55 AMG with resonator removed
-1 05 Nissan Maxima 3.5L V6 w/boltons
-1 06 MazdaSpeed3
-1 05 Chevrolet Silverado SS
-1 98 Vette with Borla Exhaust
-1 68 Camaro with Crate 350
-1 01 Lexus IS300 with built bottom end and Turbo
-1 03 Mach 1 fully built with boost
-1 09 Pontiac G8 with Magnacharger
-1 Pontiac Solstice GXP
-1 E39 BMW 540i
-1 04 Cobra (exhaust only)
-1 05 SRT4 with fully built motor and big turbo (600+whp and 2350lbs)
-1 08 Pontiac Solstice GXP with tune
-1 07 BMW 335i with tune
-1 03 Volkswagon GTI with big turbo
-1 03 Lightning with ported blower and maybe a lower pulley
-1 08 Dodge Caliber SRT4
-1 04 Dodge SRT4 w/built motor and nitrous
-1 02 Pontiac Firehawk
-1 04 SRT4 (and possibly a Ferrari 360 Modena and Syclone)
-1 Vette with TT
-1 SRT4 with Mopar Stage 3
-1 02 Camaro with LS6
-1 92 Integra GSR
-1 03 Cobra (basically stock)
-1 03 Mach 1 with Vortech Blower
So far we have 33 cars for sure coming. We can for sure handle 10-12 more. If any of you are interested, remember to sign up here.
Here is the roster as of this morning:
-1 04 Cobra (pulley + intake + exhaust)
-1 07 BMW 335i
-1 96 Saleen with Cams and a blower
-1 03 Cobra (pulley + intake + exhaust)
-1 07 SRT8 Charger with LT's and Boltons
-1 87 TurboBuick with methanol and extra boost
-1 06 Mercedes Benz C55 AMG with resonator removed
-1 05 Nissan Maxima 3.5L V6 w/boltons
-1 06 MazdaSpeed3
-1 05 Chevrolet Silverado SS
-1 98 Vette with Borla Exhaust
-1 68 Camaro with Crate 350
-1 01 Lexus IS300 with built bottom end and Turbo
-1 03 Mach 1 fully built with boost
-1 09 Pontiac G8 with Magnacharger
-1 Pontiac Solstice GXP
-1 E39 BMW 540i
-1 04 Cobra (exhaust only)
-1 05 SRT4 with fully built motor and big turbo (600+whp and 2350lbs)
-1 08 Pontiac Solstice GXP with tune
-1 07 BMW 335i with tune
-1 03 Volkswagon GTI with big turbo
-1 03 Lightning with ported blower and maybe a lower pulley
-1 08 Dodge Caliber SRT4
-1 04 Dodge SRT4 w/built motor and nitrous
-1 02 Pontiac Firehawk
-1 04 SRT4 (and possibly a Ferrari 360 Modena and Syclone)
-1 Vette with TT
-1 SRT4 with Mopar Stage 3
-1 02 Camaro with LS6
-1 92 Integra GSR
-1 03 Cobra (basically stock)
-1 03 Mach 1 with Vortech Blower
So far we have 33 cars for sure coming. We can for sure handle 10-12 more. If any of you are interested, remember to sign up here.
#18
#19
Alright everyone, 72 hour bump. For those attending, I am trying to work a schedule with basically 5 cars going per hour from 9 until 6 with an hour lunch break either at noon or 1. If anyone has a preference for what part of the day they would like to try to go please post it in this thread.
I will do my best to accommodate everyone but it may not be perfect. I will wait for those attending to reply either today or tomorrow before putting the schedule together on Friday. Also for those attending please try to bring exact change because it allows things to move more quickly when Greg isn't having to go make change for everyone. Remember it's $45 for the 3 pulls. Also remember if you guys have extra folding chairs to bring those too. You'll get tired of standing after an hour or two and there isn't enough room in the waiting area for all of us at one time. We're planning on setting up some tables outside though so people can hang out. We still have about 10 spots left to dyno if anyone else would like to come and join us. Please sign up here if you're interested.
After we finish at the dyno we're going to cruise over to Nick's Burger for the meet and should arrive before 6:30p.m. Nick's is in Fullerton for anyone who wants to come join us. Here is the address:
Nick's Burger
1712 W. Orangethorpe Ave
Fullerton, CA 92833
If anyone has any questions shoot me an email or give me a call. All my info is in the OP. Thanks again everyone.
Sean
I will do my best to accommodate everyone but it may not be perfect. I will wait for those attending to reply either today or tomorrow before putting the schedule together on Friday. Also for those attending please try to bring exact change because it allows things to move more quickly when Greg isn't having to go make change for everyone. Remember it's $45 for the 3 pulls. Also remember if you guys have extra folding chairs to bring those too. You'll get tired of standing after an hour or two and there isn't enough room in the waiting area for all of us at one time. We're planning on setting up some tables outside though so people can hang out. We still have about 10 spots left to dyno if anyone else would like to come and join us. Please sign up here if you're interested.
After we finish at the dyno we're going to cruise over to Nick's Burger for the meet and should arrive before 6:30p.m. Nick's is in Fullerton for anyone who wants to come join us. Here is the address:
Nick's Burger
1712 W. Orangethorpe Ave
Fullerton, CA 92833
If anyone has any questions shoot me an email or give me a call. All my info is in the OP. Thanks again everyone.
Sean
#23
I'm keeping track in a spreadsheet here. As people request certain times I'll update it. For the slots that are open we'll just do first come, first serve throughout the rest of the day for the remaining registered users.
I think a good size group of us will be there all day if people just want to stop by and hang out for a while
I think a good size group of us will be there all day if people just want to stop by and hang out for a while
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
#24
This is my final bump for this. For all attendees please remember to BRING CASH (correct change $45 if possible) to keep things moving smoothly. For those that have requested a certain time I have been slotting you in on the spreadsheet here.
I want to thank everyone for allowing me to continue posting about the event over the last couple months - I hope I'm not annoying all of you too much.
For anyone not going to the dyno, the meet starts at 6:30 at Nick's Burger in Fullerton. I know a good sized group of us are heading that direction after the dyno so it should be a good one. If anyone is interested in getting some numbers I think we still some spots left. Register here if you're interested. Thanks again for all the feedback and participation![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Next month on the 7th we'll be at the Street Legals at California Speedway for anyone that wants to be taped, and on the 14th of March will be the next meet and we're doing another cruise (probably at least in part up PCH). I'll see you all Saturday.
I want to thank everyone for allowing me to continue posting about the event over the last couple months - I hope I'm not annoying all of you too much.
For anyone not going to the dyno, the meet starts at 6:30 at Nick's Burger in Fullerton. I know a good sized group of us are heading that direction after the dyno so it should be a good one. If anyone is interested in getting some numbers I think we still some spots left. Register here if you're interested. Thanks again for all the feedback and participation
![Smilie](https://www.rx8club.com/images/smilies/smile.gif)
Next month on the 7th we'll be at the Street Legals at California Speedway for anyone that wants to be taped, and on the 14th of March will be the next meet and we're doing another cruise (probably at least in part up PCH). I'll see you all Saturday.
#25
RX8 & RX7 owner
u think the meet after is gonna be as big as the list of people dynoing? that would be a very nice meet that i would like to go to instead of waiting all day for people to dyno + i like to eat!