Once a month meeting near San Bernardino
07-28-2006, 03:34 PM
#5751
IstanbulNotConstantinople
Originally Posted by vipers
well, what i would recommend is when purchasing the rotors, make sure they offer a zinc coating.... zinc coating will never rust, so your rotors always look clean... most rotor companies offer this coating...and its only like $40 more
My hubs on the new rotors where zinc coated, but they don't coat any of the face, that's where the 0.5" ring-o-rust forms.
- Cesar -
07-28-2006, 03:37 PM
#5752
IstanbulNotConstantinople
Originally Posted by lesper4
Speaking of all these mods. CESAR where did you busy your springs i forget if you already told me. There is a vender in the froum selleing some pretty cheap right now.
http://www.dpeweb.com/ProductDetails...1&vehicleID=58
https://www.rx8club.com/showthread.p...51#post1461451
http://www.dpeweb.com/ProductDetails...1&vehicleID=58
https://www.rx8club.com/showthread.p...51#post1461451
It wasn't the listed price, but I emailed him and told him the eBay price so he came down a little.
Glad you saw that, I was going to let you know about it.
- Cesar -
07-28-2006, 05:20 PM
#5753
Bigboy in a little car!
Thread Starter
Join Date: Nov 2004
Location: In So Cal.. out in BFE... but in the good part... but not really by Cesar, Keith or Loren...
Posts: 1,276
Likes: 0
Received 6 Likes
on
6 Posts
Kwescott, Vipers.... why am I the only one with an Avitar like this? ( I know why not Cesar ) you guys suck.
07-28-2006, 06:04 PM
#5754
IstanbulNotConstantinople
Originally Posted by speeddemon32
Kwescott, Vipers.... why am I the only one with an Avitar like this? ( I know why not Cesar ) you guys suck.
07-28-2006, 06:13 PM
#5755
One ball, corner pocket
Join Date: Apr 2004
Location: Fontucky, right next to Patriotville
Posts: 2,053
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by speeddemon32
Kwescott, Vipers.... why am I the only one with an Avitar like this? ( I know why not Cesar ) you guys suck.
As for the change in mine, I am in the process of selling parts from my stock rear bumper. I've sold the rear rotary accent, the two exhaust shrouds, and am down to the rear aero flares. Once those sell, I am changing it back to my D1 avatar.....
Cesar...Just give me a call...I should be down the street from you on Saturday...just playing PS2 all day with Speed...as for Sunday.....Speed and I are going to race with the San Berdardino (EDIT: San Diego boys) boys in the morning. We'll probably be back at my house around 3:00.
My guess is you went with the new Greddy SP2....I know you're gonna make Speed jeolous if you did. I love the sound of that exhaust...now that I am getting used to Snowfl8k's HKS exhaust...but it was a little loud for my taste back when I was first looking for my car. Anxious to see what you got.
Last edited by kwescott; 07-30-2006 at 10:45 PM.
07-28-2006, 06:29 PM
#5756
Bigboy in a little car!
Thread Starter
Join Date: Nov 2004
Location: In So Cal.. out in BFE... but in the good part... but not really by Cesar, Keith or Loren...
Posts: 1,276
Likes: 0
Received 6 Likes
on
6 Posts
Kwescott, makes sence.....hury up ad sell your stuff. 
Cesar... Sweet avi!
I feel better now. 
Kwescott, I think we will be back before 3:00 I bet we are back by 1:00 or so... dont you think? and we are running witht he San Diego boys, not the San Bernardino guys.... we are the San Bernardino boys.
Cesar, Yes I would be jacking up your car and stealing your Greddy SP2 Exhaust if that is what you got.
Cesar... Sweet avi!
I feel better now. Kwescott, I think we will be back before 3:00 I bet we are back by 1:00 or so... dont you think? and we are running witht he San Diego boys, not the San Bernardino guys.... we are the San Bernardino boys.
Cesar, Yes I would be jacking up your car and stealing your Greddy SP2 Exhaust if that is what you got.
Last edited by speeddemon32; 07-28-2006 at 06:32 PM.
07-29-2006, 05:04 PM
#5759
Carbon Fiber Roof
iTrader: (3)
Join Date: Sep 2004
Location: Menifee, CA
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Nice! Thanks for the feedback man. I'll see ya guys at Malibu.
Originally Posted by cesaralaniz
I bought mine from R1Concepts.com. They are in Anaheim. They use to sell RX-8 rotors on ebay, but they don't list them anymore on ebay.
I checked their website and they don't list it there either. I paid about $230 for all 4 drilled/slotted. Here's some pics on my thread for my car.
https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/officially-introducing-my-yellow-8-a-36925/
Post #13 has the newer rotors.
You can probably go with any set on eBay. They don't really vary that much in quality. Just pick a seller that has good feedback. There is a good selection to choose from as far as appearance.
Also, I didn't do this, but it's recommended.
If you buy a new set, on the face of the rotor where the pads make contact, there is a ring (about 1/2 inch) nearest to the center hub, that the pads do not cover.
This ring tends to get rust on it anyways. Check you OEM rotors and I'm sure you'll see what I'm talking about.
Anyways, you should use some kind of coating on that section. You can use clear brake rotor paint. If you overspray a little onto the face, it won't really matter since the brakes will rub it off anyways.
If you're installing these yourself, you may need a special impact screwdriver to remove the front rotors. Let me know if you're doing it. It's not that expensive to buy, or if you're local, you can borrow mine.
BTW - Speeddemon32 also has aftermarker rotors drilled/slotted, but they were a gift and he doesn't know where they came from. I already asked when I was shopping for mine.
- Cesar -
I checked their website and they don't list it there either. I paid about $230 for all 4 drilled/slotted. Here's some pics on my thread for my car.
https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/officially-introducing-my-yellow-8-a-36925/
Post #13 has the newer rotors.
You can probably go with any set on eBay. They don't really vary that much in quality. Just pick a seller that has good feedback. There is a good selection to choose from as far as appearance.
Also, I didn't do this, but it's recommended.
If you buy a new set, on the face of the rotor where the pads make contact, there is a ring (about 1/2 inch) nearest to the center hub, that the pads do not cover.
This ring tends to get rust on it anyways. Check you OEM rotors and I'm sure you'll see what I'm talking about.
Anyways, you should use some kind of coating on that section. You can use clear brake rotor paint. If you overspray a little onto the face, it won't really matter since the brakes will rub it off anyways.
If you're installing these yourself, you may need a special impact screwdriver to remove the front rotors. Let me know if you're doing it. It's not that expensive to buy, or if you're local, you can borrow mine.
BTW - Speeddemon32 also has aftermarker rotors drilled/slotted, but they were a gift and he doesn't know where they came from. I already asked when I was shopping for mine.
- Cesar -
07-29-2006, 05:05 PM
#5760
Carbon Fiber Roof
iTrader: (3)
Join Date: Sep 2004
Location: Menifee, CA
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Good info. Thanks man
Originally Posted by vipers
well, what i would recommend is when purchasing the rotors, make sure they offer a zinc coating.... zinc coating will never rust, so your rotors always look clean... most rotor companies offer this coating...and its only like $40 more
07-30-2006, 10:18 PM
#5761
Banned
Join Date: Jun 2005
Location: Riverside, Ca
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
hey can any of u pm with me a when n where time of the next san berdoo meet, i was gonna go last month, i ended up showin up about 15 mins too late to the pirate city tattoo place, OVERSLEPT from a fri night of hard drinkin.............so i would appreciate anyone givin me the heads up......
07-30-2006, 10:34 PM
#5762
One ball, corner pocket
Join Date: Apr 2004
Location: Fontucky, right next to Patriotville
Posts: 2,053
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by dastallion951
hey can any of u pm with me a when n where time of the next san berdoo meet, i was gonna go last month, i ended up showin up about 15 mins too late to the pirate city tattoo place, OVERSLEPT from a fri night of hard drinkin.............so i would appreciate anyone givin me the heads up......
This will be replacing the usuall second Satuurday meet...given that it is the last Malibu meet.
07-30-2006, 10:47 PM
#5763
One ball, corner pocket
Join Date: Apr 2004
Location: Fontucky, right next to Patriotville
Posts: 2,053
Likes: 0
Received 1 Like
on
1 Post
At Cesar....is it the JIC? You pimp....I know you didn't get the full Titanium, that is, unless you hit it big at Commerce or Pechanga or something 
07-30-2006, 10:56 PM
#5764
Banned
Join Date: Jun 2005
Location: Riverside, Ca
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
kwescott do u happen to have the location of Beryl Park??? like the address city state zipcode, that way i can get directions off mapquest unless, u wanna just pm me the directions there,...............im not too far from rancho hell i drive there 5 days a week for uti sat isnt a big deal........... hit me up.
07-31-2006, 02:04 AM
#5765
T-29 years and counting
iTrader: (3)
Join Date: Apr 2005
Location: North Fontana, CA.
Posts: 3,062
Likes: 0
Received 0 Likes
on
0 Posts
Stallion see the link below, the park is just north of Bank A. Zoom Zoom in closer to see.
http://maps.google.com/maps?f=q&hl=e...l&ie=UTF8&om=1
http://maps.google.com/maps?f=q&hl=e...l&ie=UTF8&om=1
07-31-2006, 11:22 AM
#5767
IstanbulNotConstantinople
Lesper - I see why you did the WaMu search, that Beryl Park is a pain to find an address for.
I had to go to Rancho Cucamonga's park site, and their website was even screwed up.
Anyways, finally found an address.
6501 Carnelian St, Rancho Cucamonga, CA
http://maps.google.com/maps?f=q&hl=e...a&ie=UTF8&om=1
- Cesar -
I had to go to Rancho Cucamonga's park site, and their website was even screwed up.
Anyways, finally found an address.
6501 Carnelian St, Rancho Cucamonga, CA
http://maps.google.com/maps?f=q&hl=e...a&ie=UTF8&om=1
- Cesar -
07-31-2006, 02:06 PM
#5768
well, i went looking around for some prices on tires for my new wheels... OUCH! most quotes were between 600-750 for just the tires..... then i went on ebay and found both sizes i needed for $350 ... plus the guy is in moreno valley, so hopefully if i buy them, i can just go get em' they are nexen's w/ a treadwear of 340 (so no autocrossing on these
) it would be like a slip-n-slide ... so we'll see
tire sizes F 225/40zr18
R 265/35zr18
they are nexen's w/ a treadwear of 340 (so no autocrossing on these) it would be like a slip-n-slide ... so we'll see tire sizes F 225/40zr18
R 265/35zr18
07-31-2006, 02:09 PM
#5769
Bigboy in a little car!
Thread Starter
Join Date: Nov 2004
Location: In So Cal.. out in BFE... but in the good part... but not really by Cesar, Keith or Loren...
Posts: 1,276
Likes: 0
Received 6 Likes
on
6 Posts
nice Avi Jesse.
I wouls still auto X on them. he he. just have to lay off the throttle a little.
I wouls still auto X on them. he he. just have to lay off the throttle a little.
07-31-2006, 02:38 PM
#5770
IstanbulNotConstantinople
Just got my email confirmation of my exhaust shipping out.
It's going by UPS ground and should arrive on Aug 4th.
That means I'll be up Friday night installing my new toy!!!
- Cesar -
It's going by UPS ground and should arrive on Aug 4th.
That means I'll be up Friday night installing my new toy!!!
- Cesar -
07-31-2006, 04:51 PM
#5773
Administrator
iTrader: (7)
Congrats Cesar, that thing is going to sound SWWWEEEETTTTTT!!!
07-31-2006, 04:55 PM
#5774
Administrator
iTrader: (7)
Kevin,
I just sent you an overnight package...
I just sent you an overnight package...
07-31-2006, 05:05 PM
#5775
Administrator
iTrader: (7)
check out the new Siggy!!