SoCal Lounge
12-24-2009, 10:42 AM
12-24-2009, 10:52 AM
RX8 & RX7 owner
Have you been to IN N OUT? IF NOT... you have no IDEA what your MISSING 
Signal hill is about 15 minutes from LAX, but IN N OUT is AWESOME
I told the bitch NO ONIONS on my DOUBLE DOUBLE but somehow they still snuck on there 
:
Signal hill is about 15 minutes from LAX, but IN N OUT is AWESOME
I told the bitch NO ONIONS on my DOUBLE DOUBLE but somehow they still snuck on there :
12-24-2009, 11:04 AM
Riwwp, It sounds like its your MAF or cat. My MAF was loose and at 6.5 I would have an extreme loss of power. Tightened it up and problem solved. Plus after that I heard about the cat problem so I got MP so I wouldn't kill the cat and use it on smog day.
12-24-2009, 11:08 AM
Zumn I gets all the free in&out I want. two of my cousins work in alhambra and my dads a truck driver for in&out. Plus the 4x4 rule doesn't apply to me. I can get any size I want. 
two of my cousins work in alhambra and my dads a truck driver for in&out. Plus the 4x4 rule doesn't apply to me. I can get any size I want.
12-24-2009, 11:16 AM
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 252 Likes
on
110 Posts
So just grabbed a bottle of MAF cleaner, took it out, hosed it down, let it dry, reinstalled it, and...actually more power loss than before (not severely more, just noticable), across more of the RPM range. So maybe this is an airflow problem. Also grabbed a brand new air filter, popping that in next.
On the way home from the auto store, I flogged my 8 as hard as I could given the wet streets and power loss (popped enough misfires to have the flashing CEL go steady), and checked my cat when I got home. No glow, and the highest I could get on my IR thermometer was 290 degrees surface temp on my cat.
Putting in the air filter and checking for air leaks next.
On the way home from the auto store, I flogged my 8 as hard as I could given the wet streets and power loss (popped enough misfires to have the flashing CEL go steady), and checked my cat when I got home. No glow, and the highest I could get on my IR thermometer was 290 degrees surface temp on my cat.
Putting in the air filter and checking for air leaks next.
12-24-2009, 11:18 AM
RX8 & RX7 owner
+
12-24-2009, 11:22 AM
![mike[piston eater]'s Avatar](https://www.rx8club.com/avatars/mike%5Bpiston-eater%5D-48728.gif?dateline=1334247180)
guys, im off to norcal, gonna spend christmas with my moms family, the drives gonna be hellalong so imma be bored, lataes, and have a good time with your families
I remember when I first go my clutch I had to wait 1k to smash on it. 
12-24-2009, 11:27 AM
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 252 Likes
on
110 Posts
I put the new filter in, started up, noticed that it cranked much longer than it did when I first started it today, which prompted some dread since long warm startup times is one of the symptoms of failing compression.
Still have the problem, no change with this air filter.
I feel like I am chasing a gremlin.
Still have the problem, no change with this air filter.
I feel like I am chasing a gremlin.
12-24-2009, 11:29 AM
Administrator
iTrader: (7)
morning peeps!
j03: I'm workin' today also so don't feel too bad.
RIWWP: STOP BREAKING stuff!!
Alright, this is a mystery issue that we're going to help you figure out.
We've ruled out coils / plugs / wires. Stupid question but are you POSITIVE they're not loose at the plug?
You cleaned your maf and it got worse?! That's weird. Was the maf completely dry?
you wouldn't happen to have a timing light with ignition pick up would you? (you could test the coils that way to make sure they're firing)
I'm leaning towards an air leak somewhere or the damn cat.
When my RP high flow cat broke up, it was actually very hard to tell that it was broken, car drove like normal most of the time but when I mashed the pedal there was hesitation. When I dropped the cat, the honeycomb was completely broken up.
edit: long start.
oh crap.
j03: I'm workin' today also so don't feel too bad.
RIWWP: STOP BREAKING stuff!!
Alright, this is a mystery issue that we're going to help you figure out.
We've ruled out coils / plugs / wires. Stupid question but are you POSITIVE they're not loose at the plug?
You cleaned your maf and it got worse?! That's weird. Was the maf completely dry?
you wouldn't happen to have a timing light with ignition pick up would you? (you could test the coils that way to make sure they're firing)
I'm leaning towards an air leak somewhere or the damn cat.
When my RP high flow cat broke up, it was actually very hard to tell that it was broken, car drove like normal most of the time but when I mashed the pedal there was hesitation. When I dropped the cat, the honeycomb was completely broken up.
edit: long start.
oh crap.
12-24-2009, 11:36 AM
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 252 Likes
on
110 Posts
I'm leaning towards an air leak somewhere or the damn cat.
When my RP high flow cat broke up, it was actually very hard to tell that it was broken, car drove like normal most of the time but when I mashed the pedal there was hesitation. When I dropped the cat, the honeycomb was completely broken up.
When my RP high flow cat broke up, it was actually very hard to tell that it was broken, car drove like normal most of the time but when I mashed the pedal there was hesitation. When I dropped the cat, the honeycomb was completely broken up.
Yeah, I'm getting that feeling. I have all my maintenance recorded on MazdaUSA, so hoping they don't put up a fight if it comes to that. Have done all my own maintenance for the last 30k. Still have all but 1 of my oil filters though, with the date and mileage on the filter box, as what little backup it possible.
12-24-2009, 11:43 AM
Administrator
iTrader: (7)
RIWWP: do you have a multimeter? you could test each coil.
I realize they're new but if you got a bad trailing coil that could cause issues pretty quickly. (ask me how I know)
The cat should cool off rather quickly at that temperature but be very careful anyways, hot unburtnt fuel is not fun.
How's the MAF wiring? No kinks in wires, no corrosion anywhere?
I realize they're new but if you got a bad trailing coil that could cause issues pretty quickly. (ask me how I know)
The cat should cool off rather quickly at that temperature but be very careful anyways, hot unburtnt fuel is not fun.
How's the MAF wiring? No kinks in wires, no corrosion anywhere?
12-24-2009, 11:44 AM
RX8 & RX7 owner
Can someone please tune me in on the engine of this FD.... yeah I know the first is a FC 3 rotor no biggie... but what about this 4 rotor... kinda weird but its running?
[EMBED]mGJknZp-hNA&feature=related[/EMBED]
[EMBED]mGJknZp-hNA&feature=related[/EMBED]
12-24-2009, 11:50 AM
Registered
iTrader: (2)
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 16,684
Likes: 0
Received 252 Likes
on
110 Posts
RIWWP: do you have a multimeter? you could test each coil.
I realize they're new but if you got a bad trailing coil that could cause issues pretty quickly. (ask me how I know)
The cat should cool off rather quickly at that temperature but be very careful anyways, hot unburtnt fuel is not fun.
How's the MAF wiring? No kinks in wires, no corrosion anywhere?
I realize they're new but if you got a bad trailing coil that could cause issues pretty quickly. (ask me how I know)
The cat should cool off rather quickly at that temperature but be very careful anyways, hot unburtnt fuel is not fun.
How's the MAF wiring? No kinks in wires, no corrosion anywhere?
My god that thing is a pain to remove. What points do I need to be testing, and what value of what measure am I looking for?