sephyobsessed

iTrader: (1)

hiya jedi I'm so excited!!! otakon is this weekend!!! and tonight is where is starts!

Gonna so take a boombox for waiting in the preregistration line and start a dance circle....I can see it going down like that

Sorry....really hyper right now

Atilla

iTrader: (1)

'laze - awesome. i'll probably order it tomorrow! (still waiting on my credit card to clear)

kinda sad but as soon as i get approved for a higher credit line i already have a bunch of crap mapped out to max it out

Vlaze

iTrader: (14)

Just be prepared to spend at least a day working on it to get things right. You need to remove the front bumper and work with it, as well as wiring it up to the battery. Since I'm running the AEM cai, I ran it through the gap there in the opening of the sheet metal and then from there to the battery. You also have to mount the receiver in the engine bay. It's suggested to stay away from heat...and with how hot our engine bay runs while I thought of screwing it directly to the bottom portion of the OEM filter box, it would of ran too hot so I hid it behind between the fuse box and the body sheet metal where the fender is to get it as far as possible away from heat.

I can take some pictures tonight on what I did, nothing fancy, the wires are held up by the tape I mentioned earlier at places I used for routing. You can do that or drill holes and tie wrap them instead.

Jedi54

iTrader: (7)

sephy: ¿que es Otakon?

sephyobsessed

iTrader: (1)

Jedi: Otakon is the biggest geek (anime) convention on the east coast, I usually go to spend time with my long distant friends, but this year is exciting since I have about 5 groups of friends coming...

Can't wait to bust a move!!

like...you have no idea! Wish tilla were here, he'd love seshing with me when I'm THIS excited! (I'll probably get even more hyped for Sevenstock than I am right now )

Atilla

iTrader: (1)

'laze; get a vid of it working too - i'd like to see what it looks like on an 8

The Reverend

iTrader: (1)

i think that spence guy that ignored all of my advice had it on his ms bumper

Vlaze

iTrader: (14)

Aight, although I will say mine was a bit off center because I believe of the Tsunami..

The undertray has ribs spaced out evenly and I placed it dab in the center, but when activated it shows it more toward the right than the left noticeably. I think the bumper wasn't formed perfectly on the front lip as far as curvature goes possible...or just is positioned off due to the mounting hole placement they used.

quite8

I know this a long shot for some you guys, but if you have the money then I have an xtra set of drilled and slotted rotors along with pads that were shipped to me. it has to be the same price I pads as my card will be charged if it does not go back. so if you hace cash and need brakes here's your chance before I ship them back

quite8

sorry for typo. jedi knows who I am. i think.. and good detectives should also by now

Atilla

iTrader: (1)

'laze: cool, good to know. I'll probably avoid putting it in the center then. (let's face it - if you missed the center then there's a good chance i'll be way off )

I wonder what it'll look like towards the oil cooler.

Atilla

iTrader: (1)

quite8: what brand rotors and pads?

The Reverend

iTrader: (1)

ittl look ****** jdm y0

Vlaze

iTrader: (14)

Just remember, extra 1.5" or a tad more towards the ground when you add that thing under a flat bottom lip. If you're scrape already, gonna be bad news with that thing on there.

Atilla

iTrader: (1)

**** it.

Vlaze

iTrader: (14)

I've already scrapped some of the plate's paint off the numbers, and the kit frame corners as well.

BTW 'nilla, get your *** over to B@W

The Reverend

iTrader: (1)

p you are going to waste what like a hundo just to have it scrape off

Vlaze

iTrader: (14)

well at least he'll have a legit excuse when he props it up and the officer looks at the plate as to why he can't use it (no homo)

The Reverend

iTrader: (1)

John knows that one kit whereby the plate is attached to a horizontal spring mechanism so that when the car is moving above a certain mph the force from the air pushes it up and back. You need room though behind the plate and it has to be hanging down. that is the way I would like to go

quite8

rotors are from r1 concept. pads are call posi quiet
these are not the premium rotors as I don't track.
and I don't do canyon runs like I use to

Vlaze

iTrader: (14)

Depends on what you want. I think 'nilla and myself like it hidden at all times because it ruins the look of the car with the ability to bring it out when we want such as when we get pulled over.

The Reverend

iTrader: (1)

true, for hard parking and meets and such I will just tape it up and back

Vlaze

iTrader: (14)

See that's the difference between us Rev; you have to bend over, where we don't

The Reverend

iTrader: (1)

fffffuuuuuu

Atilla

iTrader: (1)

^this

i hate front plates but due to THE MAN HOLDIN' ME DOWN - i gotta have that **** up for whenever i need it.