SoCal Lounge II
Pew Pew Pew
iTrader: (10)
Who can't appreciate that? They just need to step the **** away from the computer if that's not funny to them. I just showed my old *** mom and she laughed.
I am THAT guy
iTrader: (1)
i was going to post this up to at least bring it up to 4chan status buuuuuuuut yah...it would only be a matter of minutes before the thread would have been shut down...
RX8 & RX7 owner
$48,000 (yikes)
3-Rotor Race Engine
Racing Beat currently has available for sale a very rare Peripherally Ported, Mazda Race 13G 3-Rotor engine in Racing Beat-engineered, single turbocharger configuration.
The engine is a complete Racing Beat built package producing more than 1000 bhp at 8500 RPM with approximately 21 pounds of boost. Designed to run on methanol, thereby eliminating the need for an intercooler, the race engine package incorporates an EFI Systems Engine Management System supported by a Kinsler Fuel Injection gear-rotor mechanical fuel injection pump. As prepared by Racing Beat, the engine features a complete Peterson Fluid Systems 4-stage oil scavenging assembly. Additionally, the engine utilizes an HPD water pump mounted to a Racing Beat-designed, cast aluminum front cover. These race-proven Kinsler, Peterson, and HPD components are all Gilmer belt-driven peripherals. The turbo charger selected for this package is the AirResearch T18A90 series with the M-4 compressor wheel. As equipped by Racing Beat, the turbocharger features a TIAL Waste Gate modified to minimize boost spikes.
Internally, the engine includes the following features:
- All tension bolts fully "pinned"
- Water jacket modification on all rotor housings
- Iannetti Ceramic Apex Seals 3mm
- 7.5 to 1 Low-compression ratio rotors, cast by Mazda Japan
- Exhaust manifold - Inconel 625, including all bellows.
For more information or specifications, contact Racing Beat and ask for Jim Tanner at 714-779-8677
3-Rotor Race Engine
Racing Beat currently has available for sale a very rare Peripherally Ported, Mazda Race 13G 3-Rotor engine in Racing Beat-engineered, single turbocharger configuration.
The engine is a complete Racing Beat built package producing more than 1000 bhp at 8500 RPM with approximately 21 pounds of boost. Designed to run on methanol, thereby eliminating the need for an intercooler, the race engine package incorporates an EFI Systems Engine Management System supported by a Kinsler Fuel Injection gear-rotor mechanical fuel injection pump. As prepared by Racing Beat, the engine features a complete Peterson Fluid Systems 4-stage oil scavenging assembly. Additionally, the engine utilizes an HPD water pump mounted to a Racing Beat-designed, cast aluminum front cover. These race-proven Kinsler, Peterson, and HPD components are all Gilmer belt-driven peripherals. The turbo charger selected for this package is the AirResearch T18A90 series with the M-4 compressor wheel. As equipped by Racing Beat, the turbocharger features a TIAL Waste Gate modified to minimize boost spikes.
Internally, the engine includes the following features:
- All tension bolts fully "pinned"
- Water jacket modification on all rotor housings
- Iannetti Ceramic Apex Seals 3mm
- 7.5 to 1 Low-compression ratio rotors, cast by Mazda Japan
- Exhaust manifold - Inconel 625, including all bellows.
For more information or specifications, contact Racing Beat and ask for Jim Tanner at 714-779-8677
RX8 & RX7 owner
$48,000 (yikes)
3-Rotor Race Engine
Racing Beat currently has available for sale a very rare Peripherally Ported, Mazda Race 13G 3-Rotor engine in Racing Beat-engineered, single turbocharger configuration.
The engine is a complete Racing Beat built package producing more than 1000 bhp at 8500 RPM with approximately 21 pounds of boost. Designed to run on methanol, thereby eliminating the need for an intercooler, the race engine package incorporates an EFI Systems Engine Management System supported by a Kinsler Fuel Injection gear-rotor mechanical fuel injection pump. As prepared by Racing Beat, the engine features a complete Peterson Fluid Systems 4-stage oil scavenging assembly. Additionally, the engine utilizes an HPD water pump mounted to a Racing Beat-designed, cast aluminum front cover. These race-proven Kinsler, Peterson, and HPD components are all Gilmer belt-driven peripherals. The turbo charger selected for this package is the AirResearch T18A90 series with the M-4 compressor wheel. As equipped by Racing Beat, the turbocharger features a TIAL Waste Gate modified to minimize boost spikes.
Internally, the engine includes the following features:
- All tension bolts fully "pinned"
- Water jacket modification on all rotor housings
- Iannetti Ceramic Apex Seals 3mm
- 7.5 to 1 Low-compression ratio rotors, cast by Mazda Japan
- Exhaust manifold - Inconel 625, including all bellows.
For more information or specifications, contact Racing Beat and ask for Jim Tanner at 714-779-8677
3-Rotor Race Engine
Racing Beat currently has available for sale a very rare Peripherally Ported, Mazda Race 13G 3-Rotor engine in Racing Beat-engineered, single turbocharger configuration.
The engine is a complete Racing Beat built package producing more than 1000 bhp at 8500 RPM with approximately 21 pounds of boost. Designed to run on methanol, thereby eliminating the need for an intercooler, the race engine package incorporates an EFI Systems Engine Management System supported by a Kinsler Fuel Injection gear-rotor mechanical fuel injection pump. As prepared by Racing Beat, the engine features a complete Peterson Fluid Systems 4-stage oil scavenging assembly. Additionally, the engine utilizes an HPD water pump mounted to a Racing Beat-designed, cast aluminum front cover. These race-proven Kinsler, Peterson, and HPD components are all Gilmer belt-driven peripherals. The turbo charger selected for this package is the AirResearch T18A90 series with the M-4 compressor wheel. As equipped by Racing Beat, the turbocharger features a TIAL Waste Gate modified to minimize boost spikes.
Internally, the engine includes the following features:
- All tension bolts fully "pinned"
- Water jacket modification on all rotor housings
- Iannetti Ceramic Apex Seals 3mm
- 7.5 to 1 Low-compression ratio rotors, cast by Mazda Japan
- Exhaust manifold - Inconel 625, including all bellows.
For more information or specifications, contact Racing Beat and ask for Jim Tanner at 714-779-8677
WENTGERMAN
iTrader: (6)
Uses a 3sgte 2.0 turbo top mount IC. Same as the old school MR2 turbo. It came in all wheel drive and was used in rally races in the 80's-90's. 94-98 sales dropped and they stopped development.
Those things are badass though and can put down 400 easily.
Last edited by shadycrew31; 07-31-2011 at 05:52 PM.
WENTGERMAN
iTrader: (6)
This was the last year the all-trac was released in America.
I am THAT guy
iTrader: (1)
i like how after matt drops pics of him on the track w/his s2k n' the convo immediately goes into talking about celica's.
btw, GG matt. Congrats...how'd you like it?
btw, GG matt. Congrats...how'd you like it?
WENTGERMAN
iTrader: (6)