The time has finally come for me to move on and say good bye to this beauty... It has been wonderful driving this car for the past 6 years! I am sad to let it go, but I have future project plans awaiting...

So here it is... The ultimate part out!!! I will most likely not take pictures of every single individual part that I have listed because that is just too much. Majority of the parts are in the pictures of my build thread. I will post some pics of some stuff which are in located in my build thread. Everything is still currently on the car and will be removed within the next two weeks.

I am located in San Francisco, California! If you are local you are lucky because you get first priority! The big stuff, I will not ship, but everything else is fine as long as buyer pays for it.

Thank you all for the support!

Here are the links to my build thread for many pics of parts:
https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/my-new-toys-thread-176044/
https://www.rx8club.com/rx-8-multimedia-photo-gallery-6/silvere8s-new-shots-207137/

PS: I am willing to sell the car as whole with a good offer!

Available
Borla exhaust $550
RP Supercat (high flow cat) $250
Fluid Motorsports syncro saver $90
Cobb Accessport $375
Volk Racing CE28N w/ Potenza Re760 18x8.5 +30 245 F 18x9.5 +34 275 R $2300
Volk Racing Formula lug nuts blue $140
Racing Beat front sway bar (requires Racing Beat endlinks) $140
Racing Beat rear sway bar $110
Agency power rear endlinks $75
Stance GR+ coilovers $1000
Vis carbon fiber trunk with Ings+1 replica trunk spoiler $450
Ings+1 replica Rear mud guards $150
Painted WWP chrome gas door $55
Bride seat rails $350
Hoen yellow H11 fog light bulbs $15
Trunk cargo rubber mat/tray OEM $20
Weapon R red checkered floor mats $25
OEM sunlight silver gas door $10

Sold
Weatherguard side visors Sold
Kei Office eyelids replica Sold
Custom Center Triple Gauge Pod (Painted Piano Black) Sold
R3 red stitched arm rest + swap oem Sold
Custom Carbon interior trim + swap oem Sold
Aem cold air intake CARB legal + oem swap Sold
Lineage ground wires (red) Sold
HKS Twin Ignition Amplifier DLII Sold
HKS radiator cap Sold
HKS oil cap Sold
Upgraded GM Yukon coils with MSD Wires with bracket and direct plug & play Sold
Agency Power underdrive pulley with belts Sold
Axial Flow short shifter Sold
Red Tow Hook (Mazdaspeed style threads in front or rear) Sold
Optima Red top battery (pretty much brand new) + swap Sold
Genuine JDM Mazdaspeed carbon B-pillar Sold
Greddy oil catch can (include custom bracket and ss hose) Sold
Greddy polished radiator air diversion panel Sold
Hot Inazma voltage stabilizer Sold
JIC 4 point strut brace (very rare piece) Sold
Seibon TS carbon fiber hood Sold
EBay Hood struts sold
Ings+1 side skirts (authentic with Ings logo stamped on back) Sold
JDM clear corners (need oem swap) Sold
silver turning signal bulbs Sold
Prosport water temp, oil press, oil temp gauges Sold

Here are some pics of the R3 arm rest, and weapon R checkered carpet

 

most legit guy ever! nicest rx8 you've ever seen!

 

Interested in your gauges. At the moment I am not sure if I will buy them because I have some gauges backordered for like 3 weeks now... and It is supposed to come in soon, but the manufacture is not responding to calls... so I am unsure of the status of my order. So if all fails I will ask for a refund and just pick up your , but if someone else wants them by all means sell them. BTW nice set up! and why are you parting out?

 

Aww you sold the only thing I was really interested in. Hmmm there is some parts I would like to get though, Just dont know which yet lol.

 

Thanks Juan! How you been man?

 

Thanks! Parting out because I decided to move onto a new project... lol

 

Hey,
Pmed you about the seibon Ts Hood, I'm local in milpitas too!
Oh, may also be interested in the cf trim! Thanks.

-Jeff

 

what prosport gauges are those are they the electrical gauges?

 

They are electrical and sorry they are sold!

 

danggg i am looking for some gauges i should of been quicker

 

Did you feel any difference with that 4point jic brace? Im interested in it.

 

I used to own the Mazdaspeed carbon strut bar with brake stopper before the JIC. Honestly I can't really feel the difference between the two, but there is definitely a difference between stock though. The front end of the car felt more planted and more predictable during corning. The reason I switched from the Mazdaspeed to JIC is because I think the JIC 4 point looks a lot better!

 

What are you getting Silver8?

 

Honestly I have no idea yet... I have a couple of cars in mind. Carrera S, 370Z, M3, NSX, or maybe even an Exige S. Time will tell and I will definitely keep you guys updated once I have made up my mind.

 

Pm sent bro

 

How about $10 for the radio **** plus the stock one?

 

Good list

 

bump!

 

Would love to get the trunk, is that spoiler bolted on?

 

Yes the spoiler is double sided taped and bolted on. I am coming down to socal on 5/30! If you are truly serious I will bring it down with me and meet you up. Let me know!