LFX_RX8
March 30, 2023
This photo shows the clutch master cylinder access hole after it has been opened up. As you can see, when I was opening up this hole, it was easy for the grinding bit to walk out of the hole and scrape the paint. I suggest grinding a little bit and test fitting the new Wilwood clutch master cylinder until it slides cleanly through the widened hole. Then debur the modified hole. I lightly sanded the area, cleaned it and applied a coat of primer and red paint to match the existing body paint pri
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!